Fluorene based amorphous hole transporting materials for solution processed organic light-emitting diodes
Source abstract
Abstract
Abstract For an organic light-emitting diode (OLED), enhancing hole injection into the emissive layer for charge balance is a priority to achieve efficient device performance, while solution processing enables organic devices to be fabricated cost-effectively with a large area-size via continuous roll-to-roll manufacturing. However, a limited number of small molecules-based hole-transporting materials (HTMs) were reported with the solution process feasibility and high performance. Here, we demonstrate a series of low cost, efficient and solution processable small molecule HTMs, namely, 2,7-Di(4-fluorophenyl)-9,9-diethylfluorene (Fl-PyEyF), 2,7-Di(3,5-difluorophenyl)-9,9diethylfluorene (di-Fl-PyEyF) and 2,7-Di(2,4,6-trifluorophenyl)-9,9-diethylfluorene (tri-FlPyEyF), designed by using two fluorophenyl, difluorophenyl or trifluorophenyl fragments as common end capping groups with 9,9-Diethylfluorenes cores, respectively, for highly efficient OLEDs. The glass transition temperatures of the molecules were estimated to be higher than 80 °C, which can provide morphologically stable amorphous thin films. All the molecules possess good solubility in common organic solvents. Moreover, all the synthesized molecules have not only appropriate highest occupied molecular orbital energy levels for good hole injection ability, but also sufficient lowest unoccupied molecular orbital for electron blocking capability, adequate ionization potentials (6.15 eV) and suitable triplet energies, which make them suitable hole transporting materials. The current efficiency of a conventional iridium(III) bis(4phenylthieno[3,2-c]pyridinato-N,C-2՜) acetylacetonate based phosphorescent yellow OLED device increases from 40.2 to 61.0 cd/A, an increment of 51.7% by substituting the conventional HTM, N,N′-di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB), with the tri-Fl-PyEyF counterpart. These findings suggest that the reported materials can serve as potential molecular HTMs in solution-processed OLED.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Luminescence and Fluorescent Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Organic electroluminescent diodes10.1063/1.98799 ↗
2. Electroluminescent materials for white organic light emitting diodes10.1039/c0cs00204f ↗
3. Highly efficient phosphorescent emission from organic electroluminescent devices10.1038/25954 ↗
4. https://www.ledsmagazine.com/leds-ssl-design/article/16695600/after-three-decades-oled-technology-continues-to-evolve-magazine.
5. Recent advances in white organic light-emitting diodes10.1016/j.mser.2016.06.001 ↗
6. Multilayer white light-emitting organic electroluminescent device10.1126/science.267.5202.1332 ↗
7. White organic light-emitting diodes: status and perspective10.1103/RevModPhys.85.1245 ↗
8. Introduction: organic electronics and optoelectronics10.1021/cr0501590 ↗
9. Recent advancements of high efficient donor–acceptor type blue small molecule applied for OLEDs10.1016/j.mattod.2016.12.003 ↗
10. A new molecular design based on hybridized local and charge transfer fluorescence for highly efficient (>6%) deep-blue organic light emitting diodes10.1039/C7CC07139F ↗
11. Enabling a 6.5% external quantum efficiency deep-blue organic light-emitting diode with a solution-processable carbazole-based emitter10.1021/acs.jpcc.8b07641 ↗
12. Approaches for fabricating high efficiency organic light emitting diodes10.1039/C4TC02495H ↗
13. Tuning the photophysical and electroluminescence properties in asymmetrically tetrasubstituted bipolar carbazoles by functional group disposition10.1021/acsami.8b04566 ↗
14. https://support.apple.com/en-bw/HT208191.
15. https://www.oled-info.com/samsung-galaxy-s8.
16. https://www.oled-info.com/google-pixel-2-pixel-2-xl.
17. Solution processable small molecules for organic light-emitting diodes10.1039/b926348a ↗
18. Recent progress in solution processable TADF materials for organic light-emitting diodes10.1039/C8TC01139G ↗
19. Molecule-based monochromatic and polychromatic OLEDs with wet-process feasibility10.1039/C8TC04203A ↗
20. Small molecular hole-transporting materials (HTMs) in organic light-emitting diodes (OLEDs): structural diversity and classification10.1039/C8TC01300D ↗
21. Hole-transporting materials for organic light-emitting diodes: an overview10.1039/C9TC01712G ↗
22. Electron transport materials for organic light-emitting diodes10.1021/cm049473l ↗
23. Solution-processable naphthalene and phenyl substituted carbazole core based hole transporting materials for efficient organic light-emitting diodes10.1039/C7TC03049E ↗
24. Solution process feasible highly efficient white organic light emitting diode10.1016/j.orgel.2019.03.001 ↗
25. Thermally stable multilared organic electroluminescent devices using novel starburst molecules, 4,4′,4″‐Tri(N‐carbazolyl)triphenylamine (TCTA) and 4,4′,4″‐Tris(3‐methylphenylphenylamino)triphenylamine (m‐MTDATA), as hole‐transport materials10.1002/adma.19940060913 ↗
26. Monodisperse starburst oligofluorene‐functionalized 4,4′,4″‐Tris(carbazol‐9‐yl)‐triphenylamines: their synthesis and deep‐blue fluorescent properties for organic light‐emitting diode applications10.1002/adfm.200600104 ↗
27. Amorphous molecular materials: synthesis and properties of a novel starburst molecule, 4,4′,4″ ‐Tri(N‐phenothiazinyl)triphenylamine10.1002/adma.19910031105 ↗
28. Naphthyl substituted triphenylamine derivatives as hole transporting materials for efficient red PhOLEDs10.1016/j.dyepig.2018.10.020 ↗
29. 9,9′-bis(2,2-diphenylvinyl)[3,3′]bicarbazole as low cost efficient hole transporting material for application in red PhOLEDs10.1016/j.dyepig.2018.01.040 ↗
30. Naphthyl or pyrenyl substituted 2-phenylcarbazoles as hole transporting materials for organic light-emitting diodes10.1016/j.dyepig.2016.08.056 ↗
31. Novel distyrylcarbazole derivatives as hole-transporting blue emitters for electroluminescent devices10.1039/b510035f ↗
32. Blue light-emitting and hole-transporting materials based on 9,9-bis(4-diphenylaminophenyl) fluorenes for efficient electroluminescent devices10.1039/c3tc30719k ↗
33. New spirobifluorene-based hole-transporting semiconductors for electroluminescent devices10.1039/C4TC01458H ↗
34. Hole transporting materials with high glass transition temperatures for use in organic light‐emitting devices10.1002/(SICI)1521-4095(199810)10:14<1108::AID-ADMA1108>3.0.CO;2-S ↗
35. 3,7-Diaryl substituted 10-butylphenoxazines as new hole transporting materials for organic light emitting devices10.1016/j.dyepig.2016.10.013 ↗
36. Effects of triplet energies and transporting properties of carrier transporting materials on blue phosphorescent organic light emitting devices10.1063/1.2994697 ↗
37. Covalently bound hole-injecting nanostructures. Systematics of molecular architecture, thickness, saturation, and electron-blocking characteristics on organic light-emitting diode luminance, turn-on voltage, and quantum efficiency10.1021/ja051077w ↗
38. Novel hole-transporting materials based on 1, 4-bis (carbazolyl) benzene for organic light-emitting devices10.1039/b309630k ↗
39. Hole transport in 1, 1-bis ((di-4-tolylamino) phenyl) cyclohexane (TAPC) doped poly (styrene)10.1021/j100133a022 ↗
40. Starburst molecules for amorphous molecular materials. 4, 4′, 4 ″-Tris (N, N-diphenylamino) triphenylamine and 4, 4′, 4 ″-tris [N-(3-methylphenyl)-N-phenylamino] triphenylamine10.1246/cl.1989.1145 ↗
41. Thermally stable organic light-emitting diodes using new families of hole-transporting amorphous molecular materials
42. Blue light-emitting and hole-transporting materials based on 9, 9-bis (4-diphenylaminophenyl) fluorenes for efficient electroluminescent devices10.1039/c2jm15480c ↗
43. A thermally cross-linkable hole-transporting small-molecule for efficient solution-processed organic light emitting diodes10.1016/j.orgel.2019.06.011 ↗
44. Crosslinkable hole-transporting small molecule as a mixed host for efficient solution-processed red organic light emitting diodes10.1016/j.tsf.2018.01.047 ↗
45. Purely organic thermally activated delayed fluorescence materials for organic light‐emitting diodes10.1002/adma.201605444 ↗
46. Enabling high-efficiency organic light-emitting diodes with a cross-linkable electron confining hole transporting material10.1016/j.orgel.2015.06.003 ↗
47. Thermally stable multilared organic electroluminescent devices using novel starburst molecules, 4, 4′, 4 ″‐Tri (N‐carbazolyl) triphenylamine (TCTA) and 4, 4′, 4 ″‐Tris (3‐methylphenylphenylamino) triphenylamine (m‐MTDATA), as hole‐transport materials10.1002/adma.19940060913 ↗
48. Fluorination on both D and A units in D–A type conjugated copolymers based on difluorobithiophene and benzothiadiazole for highly efficient polymer solar cells10.1039/C5EE00855G ↗
49. Fluorination effects of A-D-A small molecule donors based benzotriazole for organic solar cells10.1016/j.synthmet.2019.03.023 ↗
50. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
51. Increased open circuit voltage in fluorinated benzothiadiazole-based alternating conjugated polymers10.1039/c1cc14586j ↗
52. Fluorinated polymer yields high organic solar cell performance for a wide range of morphologies10.1002/adfm.201300093 ↗
53. Synthesis of fluorinated polythienothiophene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties10.1021/ja108601g ↗
54. Examining the effect of the dipole moment on charge separation in donor-acceptor polymers for organic photovoltaic applications10.1021/ja208642b ↗
55. Fluorenes substituted with fluorophenyl, difluorophenyl or trifluorophenyl fragments as materials for organic light emitting diodes10.1080/15421406.2016.1257331 ↗
56. Recent advances in the cross-coupling reactions of organoboron derivatives with organic electrophiles10.1016/S0022-328X(98)01055-9 ↗
57. Frisch · 2009
58. High‐efficiency blue light‐emitting diodes based on a polyphenylphenyl compound with strong electron‐accepting groups10.1002/adma.200601919 ↗
59. Alternative p-doped hole transport material for low operating voltage and high efficiency organic light-emitting diodes10.1063/1.4896127 ↗
60. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
61. High performance organic semiconductors for field-effect transistors10.1039/c0cc00947d ↗
62. Molecular-packing-enhanced charge transport in organic field effect transistors based on semiconducting porphyrin crystals10.1063/1.2786020 ↗
63. An ultra closely pi-stacked organic semiconductor for high performance field-effect transistors10.1002/adma.200700682 ↗
64. Effect of fluorination on the properties of a Donor−Acceptor copolymer for use in photovoltaic cells and transistors10.1021/cm301910t ↗
65. Insertion of an organic interlayer for hole current enhancement in inverted organic light emitting devices
66. 100% phosphorescence quantum efficiency of Ir (III) complexes in organic semiconductor films10.1063/1.1862777 ↗
67. Intermolecular interaction and a concentration-quenching mechanism of phosphorescent Ir (III) complexes in a solid film10.1103/PhysRevLett.96.017404 ↗
68. Pyridine‐containing triphenylbenzene derivatives with high electron mobility for highly efficient phosphorescent OLEDs10.1002/adma.200701730 ↗
69. Twisting donor‐acceptor molecule with an intercrossed excited state for highly efficient, deep‐blue electroluminescence10.1002/adfm.201200116 ↗
70. Effects of triplet energies and transporting properties of carrier transporting materials on blue phosphorescent organic light emitting devices10.1063/1.2994697 ↗
71. Triplet exciton confinement and unconfinement by adjacent hole-transport layers10.1063/1.1751232 ↗
72. Towards see‐through displays: fully transparent thin‐film transistors driving transparent organic light‐emitting diodes10.1002/adma.200501957 ↗