Non-fullerene organic solar cells with 7% efficiency and excellent air stability through morphological and interfacial engineering
Source abstract
Abstract
Abstract We report on the fabrication of the poly{[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2- b :4,5- b ′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4- b ]thiophenediyl]} (PTB7) and poly{[N,N-9-bis(2-octyldodecyl)- naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,59-(2,29-bithiophene)}(P(NDI2OD-T2)) active layer combination employing air brush spray coating technique in 2-methyl anisole. Optical absorption characteristics of the blend layer were examined utilizing UV–visible spectra in the wavelength sweep varying from 300 to 900 nm. Atomic force microscopy was utilized to analyze the surface characteristics of the fabricated active layer. Under the radiance of simulated solar light with 100 mW cm −2 (AM 1.5G), the current density voltage (J-V) characteristics were determined by employing a solar simulator. Fullerene-free organic solar cells were build using a combination of P(NDI2OD-T2) acceptor and a polymer donor PTB7 with SnO 2 acting as an interlayer, which showed power conversion efficiency (PCEs) of more than 7.0%, which is considered as the best PCEs been reported for the chosen donor and the acceptor. The device is extremely stable, holding 75% of its unique effectiveness subsequent to being put away in air for 72 days even without encapsulation. These outcomes demonstrate that the spray-coated film is a feasible contrasting option to the vacuum-deposited ITO film in terms of cost for mass production and for roll-to-roll based organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Rise to power – OPV- based solar parks10.1002/adma.201302031 ↗
2. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
3. Organic ternary solar cells: a review10.1002/adma.201300623 ↗
4. High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer10.1021/ja408363c ↗
5. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-t/PC71BM10.1002/adma.201400411 ↗
6. Indene-C-60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
7. High-performance organic solar cells based on a low-bandgap polythienothiophene benzodithiophene polymer and fullerene composite prepared by using the airbrush spray coating technique10.3938/jkps.62.1169 ↗
8. Performance of spray deposited poly [N-9″-hepta-decanyl-2,7- carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′, 3′-benzothiadiazole)]/[6,6]-phenyl-C61-butyric acid methyl ester blend active layer based bulk heterojunction organic solar cell devices10.1016/j.tsf.2011.12.022 ↗
9. Examining the effect of additives and thicknesses of hole transport layer for efficient organic solar cell devices10.1007/s13391-013-0013-5 ↗
10. Polymer donor - polymer acceptor (all-polymer) solar cells10.1016/j.mattod.2013.04.005 ↗
11. Perylene–diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
12. Comparision of properties of polymer organic solar cells prepared using highly conductive modified PEDOT: PSS films by spin and spray-coating methods10.7567/JJAP.53.01AB08 ↗
13. Morphology-performance relationships in high-efficiency all-polymer solar cells10.1002/aenm.201300785 ↗
14. All-polymer solar cells with 3.3% efficiency based on naphthalene diimide-selenophene copolymer acceptor10.1021/ja4085429 ↗
15. Nitrogen doped grapheme sheets as metal free anode catalysts for high performance microbial fuel cells10.1016/j.ijhydene.2015.06.025 ↗
16. Efficient all polymer solar cells from layer-evolved processing of a bilayer inverted structure10.1039/C3TC31945H ↗
17. A bipolar small molecule based on indacenodithiophene and diketopyrrolopyrrole for solution processed organic solar cells10.1039/C3TA13816J ↗
18. Binary additive synergistically boost the efficiency of all-polymer solar cells upto 3.45%10.1039/C3EE43041C ↗
19. Improved performance of polymer:polymer solar cells by doping electron-accepting polymers with an organosulfonic acid10.1002/adfm.201101215 ↗
20. Pi-Conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
21. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
22. Bulk electron transport and charge injection in a high mobility N-Type semiconducting polymer10.1002/adma.201000232 ↗
23. The role of regioregularity, crystallinity, and chain orientation on electron transport in a high-mobility N-Type copolymer10.1021/ja4118736 ↗
24. Polymer blend solar cells based on a high-mobility naphthalenediimide-based polymer acceptor device physics, photophysics and morphology10.1002/aenm.201000035 ↗
25. Influence of aggregation on the performance of all-polymer solar cells containing low-bandgap naphthalenediimide copolymers10.1002/aenm.201100601 ↗
26. Correlated donor/acceptor crystal orientation controls photocurrent generation in all-polymer solar cells10.1002/adfm.201304216 ↗
27. Morphology-performance relationships in high-efficiency all-polymer solar cells10.1002/aenm.201300785 ↗
28. Effect of PTB7 properties on the performance of PTB7: PC71BM solar cells10.1021/am5085034 ↗
29. Organic solar cells based on conjugated polymers: history and recent advances10.1007/s11814-014-0154-8 ↗
30. High-performance all-polymer solar cells based on face-on stacked polymer blends with low interfacial tension10.1021/mz500415a ↗
31. Solution-processed photocells based on low energy-gap polymer and unmodified C70 composites from halogen-free solvent exceeding 5% power conversion efficiency10.1016/j.solmat.2015.06.029 ↗
32. High performance fullerene free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
33. High efficiency non-fullerene enabled by a difluorobenzothiadiazole based donor polymer combined with properly matched small molecule acceptor10.1039/C4EE02990A ↗
34. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT: PSS and P3HT: PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
35. High performance organic photovoltaic cells with blade-coated active layers10.1016/j.solmat.2012.06.049 ↗
36. All-polymer solar cells utilizing low band gap polymers as donor and acceptor10.1002/polb.23233 ↗
37. High efficiency organic solar cells with spray coated active layers comprised of a low band gap conjugated polymer10.1063/1.3687911 ↗
38. Nano-structural characterization of SnO2 thin films prepared by reactive r.f. magnetron sputtering of tin10.1016/S0040-6090(01)01728-X ↗
39. High-efficiency all-polymer solar cells based on a pair of crystalline low-bandgap polymers10.1002/adma.201402473 ↗
40. Aggregation in a high-mobility n-type low-bandgap copolymer with implications on semicrystalline morphology10.1021/ja306844f ↗
41. Spray coating fabrication of organic solar cells bypassing the limit of orthogonal solvents10.1063/1.4807464 ↗
42. Ultrasonic spray deposition for production of organic solar cells10.1016/j.solmat.2008.10.026 ↗
43. The nanoscale morphology of a PCDTBT: PCBM photovoltaic blend10.1002/aenm.201100144 ↗
44. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
45. Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends10.1021/ja8012598 ↗
46. Morphology control in polycarbazole based bulk heterojunction solar cells and its impact on device performance10.1063/1.3601474 ↗
47. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
48. Relating the morphology of poly (p-phenylene vinylene) Methano-fullerene blends to solar cell performance10.1002/adfm.200305049 ↗
49. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
50. Structural origin of gap states in semicrystalline polymers and the implications for charge transport10.1103/PhysRevB.83.121306 ↗
51. Exciton-dissociation and charge-recombination processes in Pentacene/C60 solar cells: theoretical insight into the impact of interface geometry10.1021/ja905975w ↗