Visible light-emitting host-guest electrochemical cells using cyanine dyes
Source abstract
Abstract
Light-emitting electrochemical cells (LECs) can be fabricated as a single emissive organic/salt layer sandwiched between two electrodes, offering cost-effective next generation signage and lighting applications. Cyanine dyes are especially attractive to exploit the low cost potential of LECs. Cyanines denote a large class of fluorescent organic salts with tuneable emission wavelength, inherent conductivity for ionic and electronic charges, and many cyanines are commercially available at low cost. We systematically tested a set of cyanine dyes for visible emitting LECs. To circumvent non-radiative quenching processes in pure cyanine films (monomer fluorescence quantum yields, PLQE, < 1.5%) we exploited the efficient resonance energy transfer (RET) from cyanine host to cyanine guest molecules (PLQE maximum = 16.2%). The analysis indicated that specific host-guest interactions or a parallel energy transfer channel to host dimers can reduce the guest PLQE, despite a generally high RET efficiency in cyanine host-guest systems. By comparing single component with host-guest LECs, we found that the PLQE enhancement directly translated into the device efficiency increase, and red-emitting host-guest LECs with an external quantum efficiency (EQE) of 0.36% were achieved, close to the theoretical EQE maximum (0.81%). Chemical approaches that provide sterically demanding (to increase the PLQE) and high bandgap (for emission at smaller wavelengths) cyanines at low cost promise further progress in the field.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Polymer light- emitting electrochemical cells10.1126/science.269.5227.1086 ↗
2. Thin film light emitting devices from an electroluminescent ruthenium complex10.1063/1.117028 ↗
3. Light-emitting electrochemical cells: recent progress and future prospects10.1016/j.mattod.2014.04.029 ↗
4. Polymer light-emitting electrochemical cells for high-efficiency low-voltage electroluminescent devices10.1109/JDT.2007.896737 ↗
5. Direct measurement of the electric-field distribution in a light-emitting electrochemical cell10.1038/nmat2021 ↗
6. Operating mechanism of light-emitting electrochemical cells10.1038/nmat2128 ↗
7. A unifying model for the operation of light-emitting electrochemical cells10.1021/ja1045555 ↗
8. Luminescent ionic transition-metal complexes for light-emitting electrochemical cells10.1002/anie.201201471 ↗
9. Universal transients in polymer and ionic transition metal complex light-emitting electrochemical cells10.1021/ja3107803 ↗
10. Light emission at 5 V from a polymer device with a millimeter-sized interelectrode gap10.1063/1.2219122 ↗
11. Morphology of 2,5-substituted poly(p-phenylene vinylene) with oligo(ethylene oxide) side chains/PEO-salt blends10.1016/S0379-6779(00)00964-4 ↗
12. Small-molecule light-emitting electrochemical cells: evidence for in situ electrochemical doping and functional operation10.1039/c3cc40942b ↗
13. Light-emitting electrochemical cells using cyanine dyes as the active components10.1021/ja407515w ↗
14. Light-emitting electrochemical cells and solution-processed organic light-emitting diodes using small molecule organic thermally activated delayed fluorescence emitters10.1021/acs.chemmater.5b03245 ↗
15. Doping evolution and junction formation in stacked cyanine dye light-emitting electrochemical cells10.1021/acsami.5b12055 ↗
16. Highly efficient exciplex emission in solid-state light-emitting electrochemical cells based on mixed ionic hole-transport triarylamine and ionic electron-transport 1,3,5-triazine derivatives10.1039/c3tc30518j ↗
17. Controlling the chromaticity of small-molecule light-emitting electrochemical cells based on TIPS-pentacene10.1002/adfm.201501326 ↗
18. Utilization of a phenanthroimidazole based fluorophore in light-emitting electrochemical cells10.1039/C5TC00151J ↗
19. Bis-sulfone- and bis-sulfoxide-spirobifluorenes: polar acceptor hosts with tunable solubilities for blue-phosphorescent light-emitting devices10.1002/ejoc.201600247 ↗
20. Addition of a phosphorescent dopant in electroluminescent devices from ionic transition metal complexes10.1021/cm050986h ↗
21. Improving the carrier balance of light-emitting electrochemical cells based on ionic transition metal complexes10.1039/C4DT01675K ↗
22. Tailoring balance of carrier mobilities in solid-state light-emitting electrochemical cells by doping a carrier trapper to enhance device efficiencies10.1039/c1jm13245h ↗
23. Efficient solid-state host-guest light-emitting electrochemical cells based on cationic transition metal complexes10.1063/1.2425008 ↗
24. On the selection of a host compound for eefficient host-guest light-emitting electrochemical cells10.1039/C5TC01329A ↗
25. Phosphorescent light-emitting electrochemical cell10.1063/1.1525881 ↗
26. Phosphorescent sensitized fluorescent solid-state near-infrared light-emitting electrochemical cells10.1039/c1cp21861a ↗
27. Efficient light-emitting electrochemical cells using small molecular weight, ionic, host-guest systems10.1149/2.0201601jss ↗
28. Strongly red-shifted photoluminescence band induced by molecular twisting in cyanine (Cy3) dye films10.1021/acs.jpcc.7b01412 ↗
29. Singlet exciton energy-transfer in organic solids10.1016/0022-2313(75)90077-0 ↗
30. Photoinduced hole-transfer in semiconducting polymer/low-bandgap cyanine dye blends: evidence for unit charge separation quantum yield10.1039/b909512h ↗
31. Klàn · 2009
32. Long-term testing of polymer light-emitting electrochemical cells: reversible doping and black spots10.1016/j.orgel.2014.12.028 ↗
33. Low current density driving leads to efficient, bright, and stable green electroluminescence10.1002/aenm.201300284 ↗
34. Enhanced luminance of electrochemical cells with a rationally designed ionic iridium complex and an ionic additive10.1021/acsami.6b01816 ↗
35. Excitation energy transfer between tris-(8-hydroxyquinoline) aluminum and a red dye10.1063/1.2188374 ↗
36. Long-range resonant energy transfer for enhanced exciton harvesting for organic solar cells10.1002/adma.200700917 ↗
37. Excitation energy transfer in tris(8-hydroxyquinolinato)aluminum doped with a pentacene derivative10.1021/jp0467088 ↗
38. Optoelectronic processes in squaraine dye-doped OLEDs for emission in the near-infrared10.1002/adma.201204938 ↗
39. Influence of molybdenum oxide interface solvent sensitivity on charge trapping in bilayer cyanine solar cells10.1021/jp5005314 ↗
40. Quest for an appropriate electrolyte for high-performance light-emitting electrochemical cells10.1021/jz1010797 ↗
41. Extended molecular design concept of molecular materials for electroluminescence: sublimed-dye films, molecularly doped polymers and polymers with chromophores10.1098/rsta.1997.0045 ↗
42. Polymer light-emitting electrochemical cells with frozen p-i-n junction10.1063/1.119875 ↗
43. Angular dependence of the emission from a conjugated polymer light-emitting diode: implications for efficiency calculations10.1002/adma.19940060612 ↗
44. Device efficiency of organic light-emitting diodes: progress by improved light outcoupling10.1002/pssa.201228320 ↗
45. High-performance light-emitting electrochemical cells by electrolyte design10.1021/acs.chemmater.5b04847 ↗