D-A-D-A-D push pull organic small molecules based on 5,10-dihydroindolo[3,2-b]indole (DINI) central core donor for solution processed bulk heterojunction solar cells
Source abstract
Abstract
Abstract Two D-A-D-A-D small molecules based on same 5,10-dihydroindolo [3,2-b]indole central donor core and different benzothiadiazole (BT) and fluorine substituted BT (FBT) acceptor units, denoted as p-DINI-(BTTh3)2 (1) and p-DINI-(FBTTTh3)2 (2), respectively were synthesized and their optical and electrochemical properties were investigated. These molecules were applied as donor along with PC71BM as electron acceptor for the fabrication of solution processed bulk heterojunction organic solar cells. The solar cells prepared from the optimized active blended layer (1:2) cast from dichlorobenzene (DCB) showed overall power conversion efficiency (PCE) of 2.02% and 2.70% for 1 and 2, respectively as donor. The higher PCE of 2 as compared to 1 is attributed to the higher hole mobility and broader IPCE spectra. In order to improve the PCE we have employed a two step treatment of active layer i.e. solvent vapor annealing after thermal annealing (SVA-TA) and the PCE has been enhanced up to 4.14% and 5.27% for optimized 1:PC71BM and 2:PC71BM active layers, respectively. The improvement in the PCE has been resulted from the improvement in the balanced charge transport and better crystallinity of the donor in the blended active layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. The case for organics10.1039/c3ra42989j ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. New conjugated polymers for plastic solar cells10.1039/c1ee01072g ↗
4. π-conjugated polymers for Organic electronics and photovoltaic cells10.1021/cm102419z ↗
5. L. Lu, T. Zheng, Q. Wu, A. M. Schneider, D. Zhao, L. Yu, Recent advances in bulk heterojunction polymer solar cells, Chem. Rev. doi: 10.1021/acs.chemrev.5b00098.10.1021/acs.chemrev.5b00098 ↗
6. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
7. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
8. Plastic solar cells: self assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
9. Fullerene derivative doped Zinc oxide nanofilms as the cathode of inverted polymer solar cells with low bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
10. Highly efficient 2D conjugated benzodithiophene based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
11. Enhanced power conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
12. A polymer tandem solar cell with 10.6 % power conversion efficiency10.1038/ncomms2411 ↗
13. Aggregation and morphology control enables multiple cases of high efficiency solar cells10.1038/ncomms6293 ↗
14. Single Junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
15. Molecular bulk heterojunctions: an emerging approach to organic solar cells10.1021/ar900041b ↗
16. Small molecule solution processed bulk heterojunction solar cells10.1021/cm102189g ↗
17. Solution processed small molecule solar cells, with 6.7 % efficiency10.1038/nmat3160 ↗
18. An ester functionalized diketopyrrolopyrrole molecule with appropriate energy levels for application in solution processed organic solar cells10.1039/C2TA00148A ↗
19. Efficient small molecule bulk heterojunction solar cells with high fill factors via introduction of π-stacking moieties as end groups10.1039/C2TA00496H ↗
20. Solution processed indacenodithiophene based small molecule for bulk heterojunction solar cells10.1039/c3ta12229h ↗
21. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
22. Small molecule organic semiconductors for high efficiency organic photovoltaics10.1039/c2cs15313k ↗
23. Solution processable organic molecule photovoltaic materials with bithienyl-benzodithiophene central unit with indenedione end groups10.1021/cm400782q ↗
24. Highly efficient organic solar cells using solution processed active layer with a small molecule donor and pristine fullerene10.1039/C3TA15138G ↗
25. Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution processed small molecule solar cells10.1021/nl401758g ↗
26. Solution processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10 %10.1021/ja509703k ↗
27. Barium: an efficient cathode layer for bulk heterojunction solar cells10.1038/srep01965 ↗
28. Solution processed small molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
29. A series of simple oligomer like small molecule based on oligothiophenes for solution processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
30. Dithienosilole based small molecule organic solar cells with an efficiency over 8%: investigation of relationship between the molecular structure and photovoltaic performance10.1021/acs.chemmater.5b02616 ↗
31. Open circuit voltage up to 1.07 V for solution processed small molecule based organic solar cells10.1016/j.orgel.2014.06.012 ↗
32. High performance photovoltaic applications using solution processed small molecules10.1021/ar400088c ↗
33. Synthesis and characterization of novel dipyridylbenzothiadiazole and bisbenzothiadiazole derivatives10.1021/jo035800h ↗
34. Strongly red fluorescent novel donor-π-A-π-D type 2,1,3 –benzothiadiazoles with enhanced two photon absorption cross sections10.1039/B410016F ↗
35. 5,10-dihydroindolo[3,2-b]indole based copolymers with alternating donor and acceptor moieties for organic photovoltaics10.1021/ma301987p ↗
36. Synthesis and characterization of new dihydroindolo [3,2-b ]indole and 5,6-bis(octyloxy )-4,7-di(thiophene-2 yl)benzo[c][1,2,5]thiadiazole based polymer for bulk heterojunction polymer solar cells10.5012/bkcs.2014.35.5.1485 ↗
37. Design of organic semiconductors: tuning the electronic properties of π-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building blocks10.1002/chem.200401058 ↗
38. Organic thin film photovoltaic cells based on oligothiophenes with reduced bandgap10.1002/adfm.200600917 ↗
39. Design rules for donors in bulk heterojunction solar cells- towards 10 % energy conversion efficiency10.1002/adma.200501717 ↗
40. Charge transport and photocurrent generation in poly (3-hexylthiophene):methanofullerene bulk heterojunction solar cells10.1002/adfm.200500420 ↗
41. Alkyl chain engineering of solution processable star shaped molecules for high performance organic solar cells10.1002/aenm.201301234 ↗
42. Correlation of absorption profile and fill factor in organic solar cells: the role of mobility imbalance10.1002/aenm.201200835 ↗
43. Effects of solvent additives on morphology, charge generation, transport and recombination in solution processed small molecule solar cells10.1002/aenm.201301469 ↗
44. Influence of alkyl substituents and thermal annealing on the film morphology and performance of solution processed diketopyrrolopyrrole based bulk heterojunction solar cells10.1039/b912824g ↗
45. Effect of heteroatoms substituents on the crystal structure, film formation and optoelectronic properties of diketopyrrolopyrrole based materials10.1002/adfm.201201599 ↗
46. Small molecules solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
47. Efficiency improvement of solution processed dithienopyrrole based A-D-A oligothiophene bulk heterojunction solar cells by solvent vapor annealing10.1002/aenm.201400266 ↗
48. A solution processable star shaped molecule for high performance organic solar cells via alkyl chain engineering and solvent additives10.1016/j.orgel.2012.11.002 ↗
49. Effects of solvent additives on morphology, charge generation, transport and recombination in solution processed small molecule solar cells10.1002/aenm.201301469 ↗
50. Effects of shortened alkyl chains on solution processable small molecules with oxo-alkylated nitrile end capped acceptors for high performance organic solar cells10.1002/aenm.201400538 ↗
51. Sun · Nat. Mater · 2012 · 11 · 4410.1038/nmat3160 ↗
52. Solubility based identification of green solvents for small molecule organic solar cells10.1002/adfm.201301509 ↗
53. To-down approach for nanophase reconstruction in bulk heterojunction solar cells10.1002/adma.201402182 ↗
54. Characterization of the morphology of solution processed bulk heterojunction organic photovoltaic10.1016/j.progpolymsci.2013.07.010 ↗
55. High performance solution processed small molecule solar cells based on a dithienogermole containing molecular donor
56. Recombination in polymer –fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
57. Annealing effects on the photovoltaic performance of all conjugated poly (3-alkylthiophene) diblock copolymer based bulk heterojunction solar cells10.1039/c1nr10293a ↗
58. Relationship between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells10.1016/j.cplett.2005.11.020 ↗
59. Highly crystalline and low bandgap donor polymers fro efficient polymer solar cells10.1002/adma.201103623 ↗