Effects of the ink concentration on multi-layer gravure-printed PEDOT:PSS
Source abstract
Abstract
Abstract To date, highly conductive PEDOT:PSS is the most promising transparent electrode for printing-based flexible organic electronics. Spin-coating and slot-die coating have been commonly used for printing this material. Among the roll-to-roll printing processes, gravure is the most promising for manufacturing large area electronics offering the advantages of high speed and high printing definition. However, gravure printing highly conductive PEDOT encounters some technological limitations such as low thickness, layer inhomogeneity and high surface roughness resulting in a layer not suitable as electrode in electronic devices. In order to realize an electrode of highly conductive PEDOT by gravure printing, a multilayer approach with variable ink concentration was tried using IPA as process solvent. Variable solvent amount of overlapped printed layers was found to play an important role in the spreading of the PEDOT ink onto the pre-printed layers and in the smoothing of its existent peaks. In particular, adopting increasing ink dilution with increasing of the overlapped layers, multi-layer gravure-printed highly conductive PEDOT was successfully realized with characteristics suitable as transparent electrode for organic electronic devices (sheet resistance lower than 130 Ω/sq, conductivity higher than 450 S/cm and optical transmittance over 80%). This is the first time that such results were reached by gravure printing technique thanks to the easy proposed approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
3. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
4. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
5. Key factors to improve the efficiency of roll-to-roll printed organic photovoltaics10.1016/j.orgel.2013.04.015 ↗
6. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
7. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
8. Substrate treatment and drying conditions effect on the properties of roll-to-roll gravure printed PEDOT: PSS thin films10.1016/j.mseb.2011.03.007 ↗
9. Gravure printed flexible small-molecule organic light emitting diodes10.1016/j.orgel.2013.09.027 ↗
10. Rheological and drying considerations for uniformly gravure-printed layers: towards large-area flexible organic light-emitting diodes10.1002/adfm.201202862 ↗
11. Gravure printed organic light emitting diodes for lighting applications10.1016/j.tsf.2009.03.209 ↗
12. Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing10.1016/j.solmat.2008.12.003 ↗
13. Biodegradable polymer solar cells10.1016/j.solmat.2008.02.002 ↗
14. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
15. Highly conductive polymer anodes as replacements for inorganic materials in high-efficiency organic light-emitting diodes10.1002/adma.200602156 ↗
16. High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film for use in ITO-free polymer solar cells10.1039/b813079e ↗
17. Investigation on polymer anode design for flexible polymer solar cells10.1063/1.2945796 ↗
18. Round-Robin studies as a method for testing and validating high-efficiency ITO-free polymer solar cells based on roll-to-roll-coated highly conductive and transparent flexible substrates10.1002/aenm.201200079 ↗
19. Polymeric anodes from poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) for 3.5% efficient organic solar cells10.1016/j.tsf.2009.03.212 ↗
20. Highly conductive PEDOT: PSS on flexible substrate as ITO-free anode for polymer solar cells
21. Study of the effect of the doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) polymeric anode on the organic light-emitting diode performances10.1016/j.tsf.2012.03.128 ↗
22. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗