In-plane conduction characterisation and charge transport model of DMSO co-doped, inkjet printed Poly(3,4-ethylenedioxythiophene): Polystyrene sulfonate (PEDOT:PSS)
Source abstract
Abstract
Abstract The technologically important inkjet printed poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) films, at different extents of co-doping with dimethyl sulfoxide DMSO, have been studied in terms of in-plane charge transport and electric field force microscopy (EFM). Similarly to past studies of spin coated PEDOT:PSS films, room temperature conductivity is enhanced by a factor of 103 to 130 S cm−1 on the addition of 5% DMSO, Hall probe analysis demonstrated a decrease in contact resistance from 106 Ω to 104 Ω whilst variable-temperature conductivity analysis shows an increase in the VRH exponent from 0.25 to 0.5 signifying a charge transport evolution from Mott Variable Range Hopping in 3-dimensions to a pseudo 1-dimensional Variable Range Hopping. In addition, electric field force microscopy (EFM) showed a corresponding threefold increase in PEDOT grain size. Further analysis was conducted to determine the hopping length and the ratio of the hopping length versus localization length in the electron transport model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Desktop inkjet printer as a tool to print conducting polymers10.1016/j.synthmet.2006.03.013 ↗
2. A comparative assessment of surface microstructure and electrical conductivity dependence on co-solvent addition in spin coated and inkjet printed poly(3,4-ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS)10.1016/j.orgel.2011.11.011 ↗
3. Organic solar cells with carbon nanotubes replacing In2O3: Sn as the transparent electrode10.1063/1.2210081 ↗
4. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
5. Polymer solar cells based on inkjet-printed PEDOT:PSS layer10.1016/j.orgel.2009.01.015 ↗
6. High-conductivity poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
7. Molecular organic light-emitting diodes using highly conducting polymers as anodes10.1063/1.1480100 ↗
8. The effect of interfacial layer on the performance of organic light-emitting diodes10.1063/1.2042635 ↗
9. Device performance and polymer morphology in polymer light emitting diodes: the control of thin film morphology and device quantum efficiency10.1063/1.373062 ↗
10. Highly efficient inkjet-printed organic photovoltaic cells
11. Anisotropic hopping conduction in spin-coated PEDOT:PSS thin films10.1103/PhysRevB.76.085208 ↗
12. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗
13. A morphological model for the solvent-enhanced conductivity of PEDOT:PSS thin films10.1002/adfm.200700796 ↗
14. Effects of solvent on carrier transport in poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate)10.1016/j.synthmet.2005.07.214 ↗
15. Correlation of morphology and charge transport in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films
16. P. Wilson, C. Lekakou, J.F. Watts, System design and process optimisation for the inkjet printing of PEDOT:PSS, ASME Transactions, Journal of Micro- and Nano- Manufacturing, in press.
17. Experimental and theoretical study of wave propagation phenomena in drop-on-demand inkjet devices10.1147/rd.283.0314 ↗
18. Evaporation of a sessile droplet on a substrate10.1021/jp0118322 ↗
19. Inkjet printing of electrically conductive patterns of carbon nanotubes10.1002/smll.200600061 ↗
20. Fabrication and characterisation of inkjet-printed carbon nanotube electrode patterns on paper10.1016/j.carbon.2013.02.039 ↗
21. Efficient inkjet printing of graphene10.1002/adma.201300361 ↗
22. Effect of sheet resistance and morphology of ITO thin films on polymer solar cell characteristics10.1155/2012/879261 ↗
23. Conduction in non-crystalline materials III. localized states in a pseudo gap and near extremities of conduction and valence bands10.1080/14786436908216338 ↗
24. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
25. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
26. Using modified poly(3,4-ethylene dioxythiophene): Poly(styrene sulfonate) film as a counter electrode in dye-sensitized solar cells10.1016/j.solmat.2007.03.024 ↗
27. Flexible and transparent organic film speaker by using highly conducting PEDOT/PSS as electrode10.1016/S0379-6779(03)00199-1 ↗
28. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
29. Modification of PEDOT:PSS as hole injection layer in polymer LEDs10.1002/pssa.200404338 ↗
30. Synthesis of electrically conducting organic polymers – Halogen derivatives of polyacetylene10.1039/c39770000578 ↗
31. Effects of poly(ethylene glycol) on electrical conductivity of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonic acid) film10.1016/j.apsusc.2004.12.051 ↗
32. C. Srichan, T. Saikrajang, T. Lomas, A. Jomphoak, T. Maturos, D. Phokaratkul, T. Kerdcharoen, A. Tuantranont, Inkjet printing PEDOT:PSS using desktop inkjet printer, in: Proc. 6th Intern. Conf. Elec. Eng./Electronics, Computer, Telecomms -@@- IT, vol. 1. 2009, pp. 434–437.10.1109/ECTICON.2009.5137049 ↗