journal article·2019-04Open access

Enhanced pseudo-piezoelectric dynamic force sensors based on inkjet-printed electrostrictive terpolymer

Qing Liu, Minh Quyen Le, Claude Richard, Richard Liang, Pierre-Jean Cottinet, Jean-Fabien Capsal

Abstract

Abstract Printed electromechanical devices are an alternative approach for the fabrication of integrated force sensor networks on large-area flexible polymer foils. In the present contribution, we report on a novel parallel-plates capacitive force sensor device based on an electrostrictive poly(vinylidenefluoride-trifluoroethylene-chlorotrifluoroethylene) (P(VDF-TrFE-CTFE)) terpolymer that exhibited the best electromechanical coupling effect through the drop-on-demand (DoD) inkjet printing technology. Since the ejection of a printable ink droplet is one of the most essential steps for inkjet printing, the adaptable printing parameters depending on the ink delivery system as well as ink formula rheology were first investigated. Successfully printed patterns rely on a controlled drying process of the inks deposited on the flexible polyimide foil, which was also discussed. The substrate temperature was increased for achieving homogeneous polymer patterns. Such a printing technique eventually made it possible to obtain flawless polymer thin layers of several microns, preventing the devices from the risk of electrical failure due to short-circuiting. The capacitive devices were evaluated by proposition of a dynamic force sensor. Sensor devices based on an electrostrictive terpolymer were induced to yield significant polarization thanks to a bias voltage whereas a sensor device of poly(vinylidenefluoride-trifluoroethylene) P(VDF-TrFE) copolymer must be poled under a high electric field with a very high risk of breakdown failure. The pseudo-piezoelectric coefficient d 33 e q was a strict function of the applied electric field and reached as high as 81.6 pC N−1 under 33.33 V/ μ m . The fabrication process in the present study holds high potential in large-area printed terpolymer sensor networks without a poling process as each sensor corresponds to a pixel of the sensing array.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Schwizer · 2006
2. Nanonewton force-controlled manipulation of biological cells using a monolithic MEMS microgripper with two-axis force feedback10.1088/0960-1317/18/5/055013 ↗
3. Crocker · 1998
4. Merril · 2004
5. Printed electronics for low-cost electronic systems: technology status and application development
6. Technologies for printing sensors and electronics over large flexible substrates: a review10.1109/JSEN.2014.2375203 ↗
7. Inkjet printing of organic electronics–comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
8. Inkjet printing—process and its applications10.1002/adma.200901141 ↗
9. Inkjet printing of polymers: state of the art and future developments10.1002/adma.200300385 ↗
10. Inkjet printing of well-defined polymer dots and arrays10.1021/la049469o ↗
11. Printable low-cost and flexible carbon nanotube buckypaper motion sensors10.1016/j.matdes.2017.07.048 ↗
12. Printing of microstructure strain sensor for structural health monitoring10.1007/s00339-017-0970-x ↗
13. Giant electrostriction and relaxor ferroelectric behavior in electron-irradiated poly (vinylidene fluoride-trifluoroethylene) copolymer10.1126/science.280.5372.2101 ↗
14. High electromechanical responses in a poly (vinylidene fluoride–trifluoroethylene–chlorofluoroethylene) terpolymer10.1002/1521-4095(20021104)14:21<1574::AID-ADMA1574>3.0.CO;2-# ↗
15. An all-organic composite actuator material with a high dielectric constant10.1038/nature01021 ↗
16. Enhanced dielectric and electromechanical responses in high dielectric constant all‐polymer percolative composites10.1002/adfm.200305021 ↗
17. A comprehensive investigation of poly (vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) terpolymer nanocomposites with carbon black for electrostrictive applications10.1063/1.4864160 ↗
18. Fabrication of stretchable nanocomposites with high energy density and low loss from crosslinked PVDF filled with poly (dopamine) encapsulated BaTiO310.1021/acsami.6b14166 ↗
19. Polarization orientation, piezoelectricity, and energy harvesting performance of ferroelectric PVDF‐TrFE nanotubes synthesized by nanoconfinement10.1002/aenm.201400723 ↗
20. Enhanced electromechanical performances in plasticizer modified electrostrictive polymers10.1016/j.eurpolymj.2016.01.030 ↗
21. Control of crystal morphology and its effect on electromechanical performances of electrostrictive P(VDF-TrFE-CTFE) terpolymer10.1016/j.eurpolymj.2017.03.046 ↗
22. IEEE standard on piezoelectricity
23. The piezoelectricity of poly (vinylidene fluoride)10.1143/JJAP.8.975 ↗
24. Investigation of electrostrictive polymers for energy harvesting10.1109/TUFFC.2005.1563285 ↗
25. An active energy harvesting scheme with an electroactive polymer10.1063/1.2793172 ↗
26. Investigation of electrostrictive polymer efficiency for mechanical energy harvesting10.1109/TUFFC.2011.2022 ↗
27. Analysis of AC-DC conversion for energy harvesting using an electrostrictive polymer P (VDF-TrFE-CFE)10.1109/TUFFC.2011.1771 ↗
28. Electrostrictive energy conversion in polyurethane nanocomposites10.1063/1.3159900 ↗
29. Mechanical energy harvesting via a plasticizer-modified electrostrictive polymer10.1063/1.4939859 ↗
30. Haptic feedback using an all-organic electroactive polymer composite10.1016/j.snb.2015.06.071 ↗
31. Piezotech, https://www.piezotech.eu/en/Technical-center/Documentation/.
32. Ink‐jet printing polymers and polymer libraries using micropipettes10.1002/marc.200300148 ↗
33. Solution-processable low-voltage and flexible floating-gate memories based on an n-type polymer semiconductor and high-k polymer gate dielectrics10.1021/am5028007 ↗
34. Preparation and characterization of porous poly (vinylidene fluoride-trifluoroethylene) copolymer membranes via electrospinning and further hot pressing10.1016/j.polymertesting.2011.03.005 ↗
35. Solution‐processed highly efficient alternating current‐driven field‐induced polymer electroluminescent devices employing high‐k relaxor ferroelectric polymer dielectric10.1002/adfm.201302587 ↗
36. Morphological study of poly (vinylidene fluoride) asymmetric membranes: effects of the solvent, additive, and dope temperature10.1002/app.20141 ↗
37. 16, A.D · 1995
38. Effect of solvent quality on the Coil− stretch transition10.1021/ma1019945 ↗
39. An experimental study of drop-on-demand drop formation10.1063/1.2217929 ↗
40. Numerical calculation of the fluid dynamics of drop-on-demand jets10.1147/rd.283.0322 ↗
41. Influence of fluid physical properties on ink-jet printability10.1021/la900059m ↗
42. String formation in sheared polymer blends: coalescence, breakup, and finite size effects10.1103/PhysRevLett.86.1023 ↗
43. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution10.1146/annurev-matsci-070909-104502 ↗
44. Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing10.1016/j.jnnfm.2013.05.007 ↗
45. Single-polymer dynamics in steady shear flow10.1126/science.283.5408.1724 ↗
46. 21.1: ink jet printing of passive-matrix polymer light emitting displays
47. Inkjet printing of high molecular weight PVDF-TrFE for flexible electronics
48. Surface tension driven jet break up of strain-hardening polymer solutions10.1016/S0377-0257(01)00135-5 ↗
49. Systematic design of jettable nanoparticle-based inkjet inks: rheology, acoustics, and jettability10.1021/la502903y ↗
50. Control of droplet formation in inkjet printing using Ohnesorge number category: materials and processes
51. Inkjet printing of highly loaded particulate suspensions10.1557/mrs2003.230 ↗
52. Characterization of polymer inks for drop-on-demand printing systems10.1007/s00542-008-0639-7 ↗
53. Flexible, transparent, thickness-controllable SWCNT/PEDOT: PSS hybrid films based on coffee-ring lithography for functional noncontact sensing device10.1021/acs.langmuir.5b03449 ↗
54. Nanochromatography driven by the coffee ring effect10.1021/ac102963x ↗
55. Coffee-ring effect-based three dimensional patterning of micro/nanoparticle assembly with a single droplet10.1021/la101110t ↗
56. Controlled inkjetting of a conductive pattern of silver nanoparticles based on the coffee‐ring effect10.1002/adma.201303278 ↗
57. Inkjet printing of luminescent CdTe nanocrystal–polymer composites10.1002/adfm.200600587 ↗
58. Analysis for determining surface free energy uncertainty by the Owen–Wendt method10.1016/j.ijadhadh.2008.09.008 ↗
59. Surfactant-induced Marangoni eddies alter the coffee-rings of evaporating colloidal drops10.1021/la204928m ↗
60. All‐organic vapor sensor using inkjet‐printed reduced graphene oxide10.1002/anie.200905089 ↗
61. Room temperature preparation of conductive silver features using spin-coating and inkjet printing10.1039/B917266A ↗
62. Self‐organization of ink‐jet‐printed triisopropylsilylethynyl pentacene via evaporation‐induced flows in a drying droplet10.1002/adfm.200700859 ↗
63. Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing10.1021/la053450j ↗
64. Epoxy based ink as versatile material for inkjet-printed devices10.1021/acsami.5b06678 ↗
65. Direct writing of silver conductive patterns: improvement of film morphology and conductance by controlling solvent compositions10.1063/1.2424671 ↗
66. Inkjet printed colloidal photonic crystal microdot with fast response induced by hydrophobic transition of poly (N-isopropyl acrylamide)10.1039/c2jm33411a ↗
67. Inkjet-printed line morphologies and temperature control of the coffee ring effect10.1021/la7026847 ↗
68. Lead-free piezoceramics10.1038/nature03028 ↗
69. Unfolding grain size effects in barium titanate ferroelectric ceramics
70. An all‐printed ferroelectric active matrix sensor network based on only five functional materials forming a touchless control interface10.1002/adma.201100054 ↗
71. Flexible tactile sensors using screen-printed P (VDF-TrFE) and MWCNT/PDMS composites10.1109/JSEN.2014.2368989 ↗
72. Process influences on the structure, piezoelectric, and gas‐barrier properties of PVDF‐TrFE copolymer10.1002/polb.23443 ↗
73. Development of a smart guide wire using an electrostrictive polymer: option for steerable orientation and force feedback10.1038/srep18593 ↗
74. All-organic electrostrictive polymer composites with low driving electrical voltages for micro-fluidic pump applications10.1038/srep11814 ↗
75. A summary of corona charging methods
76. Ferroelectric behavior in poly(β-propiolactone)10.1016/S0014-3057(98)00047-0 ↗
77. Primary pyroelectricity in barium titanate ceramics10.1063/1.1723430 ↗
78. The Exo-Life Finder Telescope (ELF): design and beam synthesis concepts
79. Neurite extension of primary neurons on electrospun piezoelectric scaffolds10.1016/j.actbio.2011.07.013 ↗
80. High-dielectric-constant polymers as high-energy-density (HED) field effect actuator and capacitor materials
81. Development of a flexible lead-free piezoelectric transducer for health monitoring in the space environment10.3390/mi6111453 ↗
82. Deposition, processing and characterization of P (VDF-TrFE) thin films for sensing applications
83. Fabrication and electrical properties of lead zirconate titanate thick films10.1111/j.1151-2916.1996.tb08957.x ↗
84. PZT thin films for microsensors and actuators: where do we stand?10.1109/58.852073 ↗
85. 2016