journal article·2018-10

Fabrication of indium-tin-oxide free, all-solution-processed flexible nanogenerator device using nanocomposite of barium titanate and graphene quantum dots in polyvinylidene fluoride polymer matrix

Elyani Abu Bakar, Mohd Ambri Mohamed, Poh Choon Ooi, M.F. Mohd Razip Wee, Chang Fu Dee, Burhanuddin Yeop Majlis

Publisher page

Abstract

Abstract We demonstrated the feasibility of indium-tin-oxide free, solution processable flexible nanogenerator using the nanocomposite mixture consists of polyvinylidene fluoride polymer, barium titanate and graphene quantum dots (GQDs) on the 2.0 cm by 2.5 cm polyethylene terephthalate substrate. Poly (3, 4-ethylenedioxythiophene)-poly (styrenesulfonate) was used as the bottom conductive layer to replace the commonly used ITO bottom electrode. The multi-stacking layers were deposited using spin-coating method and the top metal electrode contacts were formed by spray-coating technique. Nanogenerator device integrated with GQDs was fabricated to examine the influence of the GQDs towards the electrical performance by compared to reference device without the presence of GQDs. Significant higher output voltage was obtained from transverse mode deformation for nanogenerator device with 4.6 Vpeak-to-peak and 48 m s wider width of positive polarity output signal. It might be associated to the presence of GQDs in enhancing the higher output voltage by charges trapped effect at the interface between GQD fillers and PVDF phases. The fabricated nanogenerator device was able to light up a light emitting diode when connected to external circuit and being stable up to 60 h without significant degradation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Flexible piezoelectric nano-composite films for kinetic energy harvesting from textiles10.1016/j.nanoen.2017.01.037 ↗
2. Comparison of piezoelectric energy harvesting performance using silicon and graphene cantilever beam10.1007/s00542-018-3857-7 ↗
3. A novel tri-layer flexible piezoelectric nanogenerator based on surface-modified graphene and PVDF-BaTiO3 nanocomposites10.1016/j.apsusc.2017.01.314 ↗
4. Electroactive phases of poly ( vinylidene fluoride ): determination, processing and applications10.1016/j.progpolymsci.2013.07.006 ↗
5. Enhanced piezoelectricity of nanoimprinted sub-20 nm poly (vinylidene fluoride–trifluoroethylene) copolymer nanograss10.1021/ma202481t ↗
6. The structural origin of enhanced energy harvesting performance in piezoelectric perovskite10.1016/j.jeurceramsoc.2017.09.001 ↗
7. In situ di-, piezo-, ferroelectric properties and domain configurations of Pb(Sc1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 ferroelectric crystals10.1021/acs.cgd.7b01023 ↗
8. Flexible piezoelectric PMN−PT nanowire-based nanocomposite and device10.1021/nl400169t ↗
9. Toward arbitrary-direction energy harvesting through flexible piezoelectric nanogenerators using perovskite PbTiO3 nanotube arrays10.1002/adma.201604500 ↗
10. Improved dielectric properties and energy storage density of poly (vinylidene fluoride-co-hexafluoropropylene) nanocomposite with hydantoin epoxy resin coated BaTiO310.1021/acsami.5b00555 ↗
11. Crystallization kinetics and phase transformation of poly (vinylidene fluoride) films incorporated with functionalized BaTiO3 nanoparticles10.1002/app.38949 ↗
12. Enhancement of ferroelectricity in strained BaTiO3 thin films10.1126/science.1103218 ↗
13. Graphene quantum dot–poly (vinylidene fluoride) composite for the preparation of asymmetric bilayer bending transducer10.1007/s10854-017-8485-y ↗
14. Self-powered graphene quantum dot/poly (vinylidene fluoride) composites with remarkably enhanced mechanical-to-electrical conversion10.1039/C6RA10831H ↗
15. Largely improved electromechanical properties of thermoplastic polyurethane dielectric elastomers by the synergistic effect of polyethylene glycol and partially reduced graphene oxide10.1016/j.compscitech.2017.02.015 ↗
16. Dielectric properties of graphene quantum dot-cobalt ferrite- poly(vinylidene fluoride) ternary composites10.1016/j.matlet.2017.07.088 ↗
17. Multifunctional transducer using poly (vinylidene fluoride) active layer and highly conducting poly (3,4-ethylenedioxythiophene) electrode: actuator and generator10.1063/1.1784890 ↗
18. Flexible nanocomposite generator made of BaTiO3 nanoparticles and graphitic carbons10.1002/adma.201200105 ↗
19. Crystal structures of three crystalline forms of poly (vinylidene fluoride)10.1295/polymj.3.600 ↗
20. Composite structure of BaTiO3 nanoparticle investigated by SR x-ray diffraction10.1143/JPSJ.71.1218 ↗
21. Focusing on luminescent graphene quantum dots: current status and future perspectives10.1039/c3nr33849e ↗
22. Chiral graphene quantum dots10.1021/acsnano.5b06369 ↗
23. Chen · 2010 · 2133
24. Flexible nanogenerators for energy harvesting and self-powered electronics10.1002/adma.201504299 ↗
25. Reduced graphene oxide preparation and its applications in solution-processed write-once-read-many-times graphene-based memory device10.1016/j.carbon.2017.09.004 ↗
26. Design and analysis of a MEMS-based bifurcate-shape piezoelectric energy harvester10.1063/1.4948592 ↗
27. An approach to design highly durable piezoelectric nanogenerator based on self-poled PVDF/AlO-rGO flexible nanocomposite with high power density and energy conversion efficiency10.1002/aenm.201601016 ↗