journal article·2017-11

Facile embedding of SiO2 nanoparticles in organic solar cells for performance improvement

Pengfei Shao, Xinyu Chen, Xin Guo, Wenjie Zhang, Fangzhi Chang, Qiming Liu, Qiang Chen, Junshuai Li, Yali Li, Deyan He

Publisher page

Abstract

Abstract In this paper, performance improvement of organic solar cells (OSCs) via facile embedding of SiO2 nanoparticles is reported. Both experimental and theoretical studies indicate that the improved performance is mainly owed to the increased short circuit current density (Jsc), which can be further attributed to elongated optical path length and thus to enhanced light confinement caused by light scattering of SiO2 nanoparticles. Compared to the planar reference device with a structure of ITO/PEDOT:PSS/P3HT:PC61BM/Al, the optimized one embedded with 160-nm-diameter SiO2 nanoparticles exhibits ∼17.5% increase in Jsc, i.e., from 10.30 to 12.10 mA/cm2, leading to the resultant performance improvement. Owing to the unique advantages of SiO2 nanoparticles including electrical insulation, low cost and easy fabrication, valuable guidelines for fabricating the related high performance-to-cost OSCs can be provided by this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
3. Controllable ZnMgO electron-transporting layers for long-term stable organic solar cells with 8.06% efficiency after one-year storage10.1002/aenm.201501493 ↗
4. Improved inverted organic solar cells with a sol-gel derived indium-doped zinc oxide buffer layer10.1109/JSTQE.2009.2039200 ↗
5. Ultrathin and light weight organic solar cells with high flexibility10.1038/ncomms1772 ↗
6. Effect of solvent on fabrication of active layers in organic solar cells based on poly(3-hexylthiophene) and fullerene derivatives10.1016/j.solmat.2008.11.003 ↗
7. Low-temperature dynamic vacuum annealing of ZnO thin film for improved inverted polymer solar cells10.1021/acsami.6b13724 ↗
8. Recent advances to understand morphology stability of organic photovoltaics10.1007/s40820-016-0107-3 ↗
9. An ultrathin, smooth, and low-loss Al-doped Ag film and its application as a transparent electrode in organic photovoltaics10.1002/adma.201306091 ↗
10. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
11. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
12. High-performance Ta2O5/Al-doped Ag electrode for resonant light harvesting in efficient organic solar cells10.1002/aenm.201500768 ↗
13. Efficient light management by textured nanoimprinted layers for perovskite solar cells10.1021/acsphotonics.7b00138 ↗
14. Enhanced performance of inverted organic solar cells by introducing a phosphorescence-doped electron extraction layer10.1109/JPHOTOV.2015.2400216 ↗
15. Si nanopillar array optimization on Si thin films for solar energy harvesting10.1063/1.3186046 ↗
16. Photonic crystal geometry for organic solar cells10.1021/nl901232p ↗
17. Light trapping in inverted organic photovoltaics with nanoimprinted ZnO photonic crystals10.1109/JPHOTOV.2017.2650560 ↗
18. Photonic nanostructures for solar energy conversion10.1039/C6EE01182A ↗
19. Nanostructural optimization of silicon/PEDOT: PSS hybrid solar cells for performance improvement10.1088/1361-6463/aa64a9 ↗
20. From randomly self-textured substrates to highly efficient thin film solar cells: influence of geometric interface engineering on light trapping, plasmonic losses and charge extraction10.1016/j.solmat.2016.10.005 ↗
21. On realizing higher efficiency polymer solar cells using a textured substrate platform10.1002/adma.201002898 ↗
22. Efficient light trapping and interface engineering for performance enhancement in PTB7-Th:PC70BM organic solar cells10.1016/j.orgel.2016.11.016 ↗
23. Towards 3D organic solar cells10.1016/j.nanoen.2016.11.059 ↗
24. Versatile surface plasmon resonance of carbon-dot-supported silver nanoparticles in polymer optoelectronic devices10.1038/nphoton.2013.181 ↗
25. Enhanced photoresponse in dye-sensitized solar cells via localized surface plasmon resonance through highly stable nickel nanoparticles10.1039/C5NR08155F ↗
26. Enhancement of the power conversion efficiency due to the plasmonic resonant effect of Au nanoparticles in ZnO nanoripples10.1016/j.orgel.2016.06.017 ↗
27. Light trapping in mesoporous solar cells with plasmonic nanostructures10.1039/C5EE03847B ↗
28. Au@Ag core-shell nanocubes for efficient plasmonic light scattering effect in low bandgap organic solar cells10.1021/nn500222q ↗
29. Efficient tandem organic solar cells with an Al/MoO3 intermediate layer10.1063/1.2976126 ↗
30. Acenaphtho[1,2-b]quinoxaline diimides derivative as a potential small molecule non-fullerene acceptor for organic solar cells10.1016/j.orgel.2015.12.022 ↗
31. Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules10.1039/C5NR07426F ↗
32. A high efficiency nonfullerene organic solar cell with optimized crystalline organizations10.1002/adma.201504091 ↗
33. Radial junction Si micro/nano-wire array photovoltaics: recent progress from theoretical investigation to experimental realization10.1016/j.nanoen.2014.04.015 ↗
34. Low-temperature solution-processed SnO2 nanoparticles as a cathode buffer layer for inverted organic solar cells10.1021/acsami.6b10857 ↗
35. Analysis of parameters and interaction between parameters in preparation of uniform silicon dioxide nanoparticles using response surface methodology10.1021/ie060299f ↗