journal article·2016-05

Efficient polymer light-emitting diodes with ZnO nanoparticles and interpretation of observed sub-bandgap turn-on phenomenon

Chun-Yuan Huang, Jia-Hua Lai

Publisher page

Abstract

Abstract Low-temperature liquid-phase synthesized ZnO nanoparticles (NPs) are used to realize highly-efficient polymer light-emitting diodes (PLEDs) containing a poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT) emissive layer. It is shown that a 77-nm-thick ZnO electron transport layer (ETL) increases the maximum luminance and current efficiency of the PLED from ∼450 to ∼13,100 cd/m 2 and 0.55–4.7 cd/A, respectively. In addition, the ZnO layer shifts the peak in the electroluminescence (EL) spectrum from ∼535 nm for a PLED with a CsN 3 layer or no NP layer to ∼585 nm. After ruling out the possibility of ZnO-defect-related emissions and micro-cavity or interference effects, it is argued that the sub-bandgap turn-on behavior of the PLED with a ZnO ETL is the result of emission zone transition and enhanced hole injection rate near the anode, based on the trap-filled space-charge limited conduction (SCLC) phenomenon in the current density-voltage curves and the current-dependent EL spectra.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · ZnO doping and properties · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Organic light-emitting diode (OLED) technology: materials, devices and display technologies10.1002/pi.1974 ↗
2. Organic light-emitting devices for solid-state lighting10.1557/mrs2008.137 ↗
3. Solution processed OLED displays: advances in performance, resolution, lifetime and appearance10.1889/1.3256850 ↗
4. Elastomeric polymer light-emitting devices and displays10.1038/nphoton.2013.242 ↗
5. Degradation of organic light-emitting diodes under different environment at high drive conditions10.1016/j.orgel.2006.10.005 ↗
6. Degradation mechanisms and reactions in organic light-emitting devices10.1021/cr400704v ↗
7. MoOx and V2Ox as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices10.1038/lsa.2015.46 ↗
8. Three-band white light-emitting diodes based on hybridization of polyfluorene and colloidal CdSe/ZnS quantum dots10.1109/LPT.2009.2039207 ↗
9. Atomic layer deposited zirconium oxide electron injection layer for efficient organic light emitting diodes10.1016/j.orgel.2012.10.006 ↗
10. Interface modification by Cs2CO3 buffer layer in electroluminescent quantum dot light-emitting diodes with metal-oxide carrier transport layers10.1016/S1452-3981(23)14413-0 ↗
11. Impact of preparation condition of ZnO electron transport layer on performance of hybrid organic-inorganic light-emitting diodes10.1063/1.4866993 ↗
12. High-efficiency, low turn-on voltage blue-violet quantum-dot-based light-emitting diodes10.1021/nl504328f ↗
13. Homogeneous ZnO nanostructure arrays on GaAs substrates by two-step chemical bath synthesis10.1007/s11051-012-0866-9 ↗
14. High-efficiency quantum-dot light-emitting devices with enhanced charge injection10.1038/nphoton.2013.70 ↗
15. UV enhanced indium-doped ZnO nanorod field emitter10.1109/TED.2013.2280910 ↗
16. Density-controlled and seedless growth of laterally bridged ZnO nanorod for UV photodetector applications10.1016/j.snb.2014.06.004 ↗
17. Influence of cathode roughness on the performance of F8BT based organic–inorganic light emitting diodes10.1016/j.orgel.2014.10.038 ↗
18. Hybrid organic-inorganic light emitting diodes: effect of the metal oxide10.1039/b927408a ↗
19. Ionic liquid modified zinc oxide injection layer for inverted organic light-emitting diodes10.1016/j.orgel.2012.09.027 ↗
20. Thick polymer light-emitting diodes with very high power efficiency using Ohmic charge-injection layers10.1088/0268-1242/29/2/025005 ↗
21. Barium hydroxide as an interlayer between zinc oxide and a luminescent conjugated polymer for light-emitting diodes10.1002/adfm.201200850 ↗
22. Enhanced electron injection into inverted polymer light-emitting diodes by combined solution-processed zinc oxide/polyethylenimine interlayers10.1002/adma.201304666 ↗
23. Solution processed, white emitting tandem organic light-emitting diodes with inverted device architecture10.1002/adma.201400332 ↗
24. Effect of thermal annealing treatment on structural, electrical and optical properties of transparent sol–gel ZnO thin films10.1016/j.materresbull.2005.06.010 ↗
25. Charge generation layers for solution processed tandem organic light emitting diodes with regular device architecture10.1021/acsami.5b00883 ↗
26. Hybrid polymer: colloidal nanoparticle photovoltaic cells incorporating a solution-processed, multi-functioned ZnO nanocrystal layer10.1063/1.3689154 ↗
27. Cesium azide—an efficient material for green light-emitting diodes with giant quantum dots10.1109/LPT.2015.2454052 ↗
28. Direct evidence of n-type doping in organic light-emitting devices: N free Cs doping from CsN310.1063/1.4718017 ↗
29. Synthesis and growth of ZnO Nanoparticles10.1021/jp980730h ↗
30. Electron and hole transport in poly(fluorene-benzothiadiazole)10.1063/1.3574907 ↗
31. Electroluminescence from light-emitting polymer/ZnO nanoparticle heterojunctions at sub-bandgap voltages10.1016/j.nantod.2010.08.010 ↗
32. Improved electron injection in poly(9, 9′-dioctylfluorene)-co-benzothiodiazole via cesium carbonate by means of coannealing10.1063/1.3564903 ↗
33. Color tuning in inverted blue light-emitting diodes based on a polyfluorene derivative by adjusting the thickness of the light-emitting layer10.1039/C5TC02113H ↗
34. Angular dependence of the sharply directed emission in organic light emitting diodes with a microcavity structure10.1143/JJAP.41.2787 ↗
35. Conjugated-polymer-based lateral heterostructures defined by high-resolution photolithography10.1002/adfm.201000436 ↗
36. General observation of n-type field-effect behaviour in organic semiconductors10.1038/nature03376 ↗
37. Synergistic effect on the efficiency of polymer light-emitting diodes upon blending of two green-emitting polymers10.1063/1.3456997 ↗
38. Trap-assisted hole injection and quantum efficiency enhancement in poly(9,9′dioctylfluorene-alt-benzothiadiazole) polymer light-emitting diodes10.1063/1.1818350 ↗
39. Imprinted nonoxidized graphene sheets as an efficient hole transport layer in polymer light-emitting diodes10.1063/1.4866341 ↗
40. Hybrid organic–inorganic light-emitting diodes10.1002/adma.201004324 ↗