journal article·2019-04

Improving performance of polymer-based ammonia gas sensor using POMA/V2O5 hybrid films

M.O. Diniz, A.F. Golin, M.C. Santos, R.F. Bianchi, E.M. Guerra

Publisher page

Abstract

Abstract Conducting polymers such as polyaniline (PANi) have been widely investigated as ammonia gas sensors due to their intrinsic redox states, good environmental stability, and suitability for low-cost and variable changing in electrical conductivity when exposed to acid and basic gases. In this paper we used both a hybrid PANi derivative, poly(o-methoxyaniline) (POMA)-vanadium pentoxide (V2O5) film, and new ac electrical measurement strategies to increase the ammonia gas sensor performance. Complex impedance measurements of POMA/V2O5 hybrid film showed linearity in response and a high sensitivity to ammonia in the 0–20 ppm range in both real (around 800%) and imaginary (around 3000%) components, which indicated that the film is a good candidate to use as an ammonia sensing material. FTIR spectra presented typical V2O5 and POMA bands and also presented a shifting to higher wave numbers in bands referring to the vanadyl group and primary amines, which indicated the presence of hydrogen bonds between oxide and polymer. Finally, the Cole–Cole theoretical model with an interface effect provided a good fit for the experimental results from electrical ac measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Analytical Chemistry and Sensors · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Polyaniline (PANi) based electrode materials for energy storage and conversion10.1016/j.jsamd.2016.08.001 ↗
2. Preparation of conducting polymer inverse opals and its application as ammonia sensor10.1016/j.colsurfa.2013.04.053 ↗
3. A room temperature ammonia gas sensor based on cellulose/TiO 2/PANI composite nanofibers10.1016/j.colsurfa.2016.01.024 ↗
4. Overview on conducting polymer in energy storage and energy conversion system10.1080/10601325.2017.1317210 ↗
5. Conducting polymers for pseudocapacitive energy storage, 201610.1021/acs.chemmater.6b01762 ↗
6. Conducting-polymer-based materials for electrochemical energy conversion and storage10.1002/adma.201703044 ↗
7. Infrared electrochromic conducting polymer devices10.1039/C7TC00257B ↗
8. A facile approach for constructing conductive polymer patterns for application in electrochromic devices and flexible microelectrodes10.1021/acsami.6b10103 ↗
9. Electrochemical properties of PANI as single electrode of electrochemical capacitors in acid electrolytes10.1155/2013/940153 ↗
10. Application of poly(o-phenylenediamine) in rechargeable cells10.1007/s10800-004-3302-8 ↗
11. Highly sensitive ammonia resistive sensor based on electrospun V2O5 fibers10.1016/j.snb.2012.01.007 ↗
12. Chemical treatment influence on the glass substrate to the growth of V 2O5/PANI thin film
13. Poly(o-methoxyaniline) doped with an organic acid as cost-efficient counter electrodes for dye-sensitized solar cells10.1016/j.electacta.2016.08.012 ↗
14. Characterization of Poly(o-methoxyaniline) Emeraldine-base form obtained at different time neutralization10.1016/j.molstruc.2014.01.082 ↗
15. Gas sensors based on electrodeposited polymers10.3390/met5031371 ↗
16. Fabrication of various metal oxide-based hybrid materials with an ultra-thin conducting polymer layer by surface selective polymerization10.1166/jnn.2016.12507 ↗
17. Synthesis, characterization and electrical properties of nano metal and metal-oxide doped with conducting polymer composites by in-situ chemical polymerization abbreviations: FESEM: field emission scanning electron
18. Studies on tin oxide-intercalated polyaniline nanocomposite for ammonia gas sensing applications10.1016/j.snb.2009.02.012 ↗
19. Hybrid organic/inorganic nanocomposites for photovoltaic cells10.3390/ma7042747 ↗
20. Polymer–metal-oxide hybrid solar cells10.1039/c3ta11998j ↗
21. Metal oxide applications in organic-based photovoltaics10.1179/026708311X13081465539809 ↗
22. Hybrid materials and polymer electrolytes for electrochromic device applications10.1002/adma.201200213 ↗
23. Electrochromic properties of sol–gel prepared hybrid transition metal oxides – a short review10.1016/j.jsamd.2017.08.005 ↗
24. Conductive polymer/transition metal oxide hybrid materials for lithium batteries10.1557/PROC-726-Q11.7 ↗
25. Ammonia sensing and DC electrical conductivity studies of p-toluene sulfonic acid doped cetyltrimethylammonium bromide assisted V2O5/polyaniline composite nanofibers10.1016/j.jiec.2014.07.002 ↗
26. Layer-by-layer nanostructured hybrid films of polyaniline and vanadium oxide10.1166/jnn.2001.080A ↗
27. Comparative study of layer-by-layer deposition techniques for poly(sodium phosphate) and poly(allylamine hydrochloride)10.1186/1556-276X-8-539 ↗
28. Layer-by-Layer nanostructured hybrid films of polyaniline and vanadium oxide10.1166/jnn.2001.080A ↗
29. E. Barsoukov, J.R. Macdonald, Impedance Spectroscopy: Theory, Experiment, and Applications, Wiley, New York.
30. Ammonia gas sensor based on the frequency-dependent impedance characteristics of ultrathin polyaniline films10.1016/j.sna.2016.08.005 ↗
31. Synthesis and characterization of poly (o-anisidine) films
32. Electrochromic and conductivity properties: a comparative study between melanin-like/V2O5 · nH2O and polyaniline/V2O5 · nH2O hybrid materials10.1016/S0022-3093(00)00129-0 ↗
33. Extended gate field effect transistor using V2O5 xerogel sensing membrane by sol-gel method10.1016/j.solidstatesciences.2008.07.014 ↗
34. Effect of mesoporosity of vanadium oxide prepared by sol-gel process as cathodic material evaluated by cyclability during Li+ insertion/deinsertion10.1007/s10971-010-2162-4 ↗
35. Synthesis and characterization of conducting polyaniline nanocomposites containing ZnO nanorods
36. Sensor de amônia baseado em filmes finos de polianilina para criadouros de frango de corte
37. Significant enhancement of the adhesion between metal films and polymer substrates by UV−Ozone surface modification in nanoscale10.1021/acsami.6b09930 ↗
38. Polyaniline nanofibers and nanocomposites: preparation, characterization, and application for Cr(VI) and phosphate ions removal from aqueous solution10.1016/j.arabjc.2014.02.008 ↗
39. Synthesis and characterization of polyaniline and poly(aniline-co-o-nitroaniline) using vibrational spectroscopy10.1016/j.arabjc.2013.10.010 ↗
40. Estudo da Aplicação da Poli(O-Metoxianilina) e de seus Compósitos com Negro de Fumo no Processamento de Absorvedores de Micro-Ondas10.1590/S0104-14282012005000049 ↗
41. Synthesis, characterization, and conductivity studies of poly-o-methoxyaniline intercalated into V2O5 xerogel10.1006/jssc.2002.9700 ↗
42. Sol-gel chemistry and electrochemical properties of vanadium oxide gels10.1016/0167-2738(96)00336-0 ↗
43. Effect of oxidizing agent on ammonia sensing of DBSA doped polyaniline nanocomposite thin film10.1007/s10854-016-4270-6 ↗
44. Combinations of N, P-type semiconductors and conductor (c-Fe 2 O 3 , polypyrrole and silver) as different nanostructural nanocomposites for adsorptive and photocatalytic application10.1007/s11164-013-1308-8 ↗
45. Synthesis and characterization of V2O5/PANI thin films for application in amperometric ammonia gas sensors
46. Structural properties, impedance spectroscopy and dielectric spin relaxation of Ni-Zn ferrite synthesized by double sintering technique10.3329/jsr.v7i3.23358 ↗