Self-assembled monolayer-modified ITO for efficient organic light-emitting diodes: The impact of different self-assemble monolayers on interfacial and electroluminescent properties
Source abstract
Abstract
Abstract Assembling monolayers between ITO electrode and the overlying organic layers is an important way to obtain high-performance organic light-emitting diodes (OLEDs). Herein, self-assembling monolayers (SAMs) based on pentafluorobenzylphosphonic acid (F5BPA) and heneicosafluorododecylphosphonic acid (HF21DPA) were formed on ITO surfaces. The work function of ITO was elevated from 4.82 eV to 5.20 eV and 5.81 eV by introduction of F5BPA and HF21DPA, respectively, which could facilitate hole transport into the device, and therefore improve charge balance in OLEDs. In addition, the water contact angles of ITO also increased from 46.45° to 87.09° and 110.6°, respectively, which could contribute to better-matched interfacial surface energy, and prevent the interface incompatibility. The surface properties of ITO after modification were also studied by using X-ray photoelectron spectroscopy, atomic force microscope and UV–visible spectra measurements. Besides, compared with the OLEDs using bare ITO anodes, the SAM-modified devices showed improved brightness (29245.49 cd/m2), higher luminous efficiency (6.09 cd/A), and smaller turn-on voltage (2.8 V). This promising approach provides a simple route for the fabrication of highly efficient OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Molecular Junctions and Nanostructures · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
2. The modification of indium tin oxide with phosphonic acids: mechanism of binding, tuning of surface properties, and potential for use in organic electronic applications10.1021/ar200119g ↗
3. Approaching charge balance in organic light-emitting diodes by tuning charge injection barriers with mixed monolayers10.1021/la2036423 ↗
4. Fluorinated alkyl phosphonic acid SAMs replace PEDOT: PSS in polymer semiconductor devices10.1016/j.orgel.2011.12.008 ↗
5. Surface modification and characterization of indium-tin oxide for organic light-emitting devices10.1016/j.jcis.2006.07.009 ↗
6. Improved performance of OLEDs with ITO surface treatments10.1016/j.tsf.2004.08.111 ↗
7. Increase of charge carriers density and reduction of Hall mobilities in oxygen-plasma treated indium–tin–oxide anodes10.1063/1.124263 ↗
8. Mechanism for the increase of indium-tin-oxide work function by O2 inductively coupled plasma treatment10.1063/1.1633351 ↗
9. Trap-free, space-charge-limited currents in a polyfluorene copolymer using pretreated indium tin oxide as a hole injecting contact10.1016/S0379-6779(00)01336-9 ↗
10. Methanol treatment on low-conductive PEDOT: PSS to enhance the PLED's performance10.1016/j.orgel.2015.10.039 ↗
11. Solution processed WO3 layer for the replacement of PEDOT: PSS layer in organic photovoltaic cells10.1016/j.orgel.2012.01.033 ↗
12. Light stability of 3,4-ethylenedioxythiophene-based derivatives10.1016/S0379-6779(02)00457-5 ↗
13. Self-assembled monolayers of thiolates on metals as a form of nanotechnology10.1021/cr0300789 ↗
14. Performance enhancement of organic light-emitting diodes by chlorinated indium tin oxide in the presence of hydrogen peroxide10.1016/j.orgel.2013.01.001 ↗
15. Effect of ITO surface modification on the OLED device lifetime10.1021/la4049659 ↗
16. Systematic investigation of surface modification by organosiloxane self-assembled on indium-tin oxide for improved hole injection in organic light-emitting diodes10.1021/am500399e ↗
17. Tailoring the work function of indium tin oxide electrodes in electrophosphorescent organic light-emitting diodes10.1063/1.3095492 ↗
18. The roles of thermally evaporated cesium carbonate to enhance the electron injection in organic light emitting devices10.1063/1.3033501 ↗
19. Organic electroluminescent devices: enhanced carrier injection using an organosilane self assembled monolayer (SAM) derivatized ITO electrode10.1016/S0040-6090(01)01191-9 ↗
20. Toward the ideal organic light-emitting diode. The versatility and utility of interfacial tailoring by cross-linked siloxane interlayers10.1021/ar030210r ↗
21. Enhancement of the luminance efficiency due to an embedded self-assembled monolayer in organic light-emitting devices10.7567/JJAP.52.11NK01 ↗
22. Using self-assembling dipole molecules to improve hole injection in conjugated polymers10.1002/adfm.200400035 ↗
23. Enhancement of optical and electrical performance of organic light emitting diodes fabricated by SAM modified ITO anodes
24. Progress in modification of indium-tin oxide/organic interfaces for organic light-emitting diodes10.1080/10408436.2011.654006 ↗
25. Self-assembled monolayer modified MoO3/Au/MoO3 multilayer anodes for high performance OLEDs10.1007/s13391-017-6381-5 ↗
26. C-H direct arylated 6H-Indolo[2,3-b]quinoxaline derivative as a thickness-dependent hole-injection layer10.1002/asia.201700112 ↗
27. Characterization of Indium−Tin oxide interfaces using x-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: effect of surface pretreatment conditions10.1021/la011101t ↗
28. Indium—tin oxide organic interfaces10.1021/bk-2003-0844.ch011 ↗
29. Surface engineering to achieve organic ternary memory with a high device yield and improved performance10.1039/C6SC03986C ↗
30. Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy10.1063/1.116313 ↗
31. Low resistance and high work-function WO3/Ag/MoO2multilayer as transparent anode for bright organic light-emitting diodes10.7567/JJAP.54.03CC01 ↗
32. Two trans-1-(9-anthryl)-2-phenylethene derivatives as blue-green emitting materials for highly bright organic light-emitting diodes application10.1016/j.orgel.2017.07.054 ↗
33. Double-heterojunction nanorod light-emitting diodes with high efficiencies at high brightness using self-assembled monolayers10.1021/acsphotonics.6b00371 ↗
34. Dendron engineering in self-host blue iridium dendrimers towards low-voltage-driving and power-efficient nondoped electrophosphorescent devices10.1039/C6CC08722A ↗
35. Self-Host blue-emitting iridium dendrimer containing bipolar dendrons for nondoped electrophosphorescent devices with superior high-brightness performance10.1021/acsami.6b09732 ↗
36. Single molecular tuning of the charge balance in blue-emitting iridium dendrimers for efficient nondoped solution-processed phosphorescent OLEDs10.1039/C6CC05165K ↗
37. Novel thermally activated delayed fluorescence materials-thioxanthone derivatives and their applications for highly efficient OLEDs10.1002/adma.201401393 ↗