journal article·2018-06

Electret films with extremely high charge stability prepared by thermal evaporation of Teflon AF

Ralph E. Hirschberg, Michael Scharnberg, Stefan Schröder, Stefan Rehders, Thomas Strunskus, Franz Faupel

Publisher page

Abstract

Abstract We report on the preparation of Teflon AF based electret films by thermal evaporation and corona discharge. Due to a special construction of the evaporator, smooth films without micropores could be deposited even at rates above 10 nm/s. The influence of film thickness, substrate temperature, charge density and type of charge carrier on the charge stability was investigated together with the mechanism of charge decay. Negatively charged films of 9.5 μm evaporated Teflon AF 1600 turned out to exhibit a much higher charge stability compared to commercial 25 μm Teflon FEP electret foils at almost 1/3 thickness and proved to be also superior to spin-coated Teflon AF 1600 films. This is discussed in terms of absence of discharge via the surface. Charge decay was shown to take place by internal drift and diffusion through the bulk of the film and not along the surface or via external discharge mechanisms as reported for Teflon FEP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Advanced Sensor and Energy Harvesting Materials · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Sessler · 1987 · 13
2. Surface charge self-recovering electrets film for wearable energy conversion in a harsh environment10.1039/C6EE02135B ↗
3. Electrospun polyetherimide electret nonwoven for bi-functional smart face mask10.1016/j.nanoen.2017.03.011 ↗
4. A review of piezoelectric polymers as functional materials for electromechanical transducers10.1088/0964-1726/23/3/033001 ↗
5. Paper-based active tactile sensor array10.1002/adma.201502470 ↗
6. Avataneo · 2016 · 64
7. Vapor deposition of low-dielectric-constant polymeric thin films10.1557/S0883769400034163 ↗
8. Deposition of amorphous fluoropolymers thin films by laser ablation10.1063/1.108939 ↗
9. Deposition of amorphous fluoropolymer thin films by thermolysis of Teflon amorphous fluoropolymer10.1063/1.107163 ↗
10. Chemical vapor deposition and characterization of amorphous Teflon fluoropolymer thin films10.1007/s11664-997-0110-z ↗
11. Controlled generation of Ni nanoparticles in the capping layers of Teflon AF by vapor-phase tandem evaporation10.1021/nl020228f ↗
12. Vapor phase deposition, structure, and plasmonic properties of polymer-based composites containing Ag-Cu bimetallic nanoparticles10.1007/s11468-011-9282-8 ↗
13. Singh · 1996 · 78
14. Analysis oft he x-ray photoelectron spectrum of Teflon AF 160010.1116/1.580620 ↗
15. Surface modification of fluoropolymers with vacuum ultraviolet irradiation10.1116/1.579086 ↗
16. Charge storage and it's dynamics in porous polytetrafluoroethylene (PTFE) film electrets10.1109/TDEI.2003.1176568 ↗
17. Linear decay of charge in electrets10.1103/PhysRevB.59.9954 ↗
18. A percolation theory analysis of surface potential decay related to corona charged polypropylene (PP) electrets10.1088/0953-8984/16/3/021 ↗