journal article·2013-10

Role of the donor material and the donor–acceptor mixing ratio in increasing the efficiency of Schottky junction organic solar cells

Sibi Sutty, Graeme Williams, Hany Aziz

Organic Electronics· Volume 14· Issue 10
Publisher page

Abstract

Abstract Schottky junction organic solar cells (OSCs) employ a high work-function anode and an active layer comprised of fullerene and low concentrations of donor. In this study, the roles of the donor material and the donor–acceptor mixing ratio in Schottky junction OSCs are explored. The results show that the high short circuit current ( J sc ) seen in Schottky junction OSCs at low donor concentrations arises primarily from photocurrent contributions from charge-transfer intermolecular states in C 60 aggregates. These aggregates absorb light at 400–600 nm and are thus well matched to the solar spectrum. The presence of the donor molecules is shown to be necessary for the dissociation of the C 60 aggregate excitons, which ultimately allows for enhanced photocurrents. The exciton dissociation process is governed primarily by the highest occupied molecular orbial (HOMO) energy level difference between the donor and C 60 , and is only efficient when this difference is large enough for the energetically favorable transfer of holes from C 60 to the donor material. Increasing the donor concentration beyond a certain threshold hinders C 60 aggregate formation and thus removes its contribution to photocurrent completely. Furthermore, the V oc is shown to be strongly influenced by the choice of donor material, indicating that it is not set by the Schottky junction barrier height as previously thought. In spite of this influence on V oc , the choice of donor in the active layer does not appear to play a significant role in the extraction of holes from the Schottky junction organic solar cells. Optimized chlorine indium phthalocyanine (ClInPc) doped C 70 Schottky cells were fabricated to demonstrate a peak power conversion efficiency of 3.6%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
2. Small-molecule solar cells-status and perspectives10.1088/0957-4484/19/42/424001 ↗
3. Vacuum-deposited small-molecule organic solar cells with high power conversion efficiencies by judicious molecular design and device optimization10.1021/ja301872s ↗
4. Small molecule organic semiconductors on the move: promises for future solar energy technology10.1002/anie.201102326 ↗
5. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
6. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
7. Organic semiconductors and their applications in photovoltaic devices10.1080/15583724.2011.644368 ↗
8. Solar cell efficiency tables (version 27)10.1002/pip.686 ↗
9. Heliatek, Heliatek consolidates its technology leadership by establishing a new world record for organic solar technology with a cell efficiency of 12%, (2013), Available from: . [Accessed June 21 2013].
10. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
11. Mixed donor–acceptor molecular heterojunctions for photovoltaic applications. II. Device performance10.1063/1.2142073 ↗
12. Carrier transport in multilayer organic photodetectors: II. Effects of anode preparation10.1063/1.1640454 ↗
13. Bulk-heterojunction photovoltaic devices based on donor–acceptor organic small molecule blends10.1016/S0927-0248(02)00369-0 ↗
14. Organic schottky barrier photovoltaic cells based on MoOx/C6010.1063/1.3415497 ↗
15. Solution-processed fullerene-based organic schottky junction devices for large-open-circuit-voltage organic solar cells10.1002/adma.201203080 ↗
16. Bulk heterojunction photovoltaic cells with low donor concentration10.1002/adma.201102173 ↗
17. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
18. Strong interface p-doping and band bending in C60 on MoOx10.1016/j.orgel.2011.06.007 ↗
19. A hybrid planar-mixed tetraphenyldibenzoperiflanthene/C70 photovoltaic cell10.1063/1.4793195 ↗
20. Efficient organic photovoltaic cells based on nanocrystalline mixtures of boron subphthalocyanine chloride and C6010.1002/adfm.201101948 ↗
21. Electronic structures of planar and mixed C70/CuPc heterojunctions in organic photovoltaic devices10.1016/j.orgel.2011.05.013 ↗
22. Phase separation analysis of bulk heterojunctions in small-molecule organic solar cells using zinc-phthalocyanine and C6010.1103/PhysRevB.85.245314 ↗
23. Absorbing visible light materials of subphthalocyanine and C70 for efficient planar-mixed organic photovoltaic devices10.1149/2.041301jes ↗
24. Effect of concentration gradients in ZnPc:C60 bulk heterojunction organic solar cells
25. Graded donor–acceptor heterojunctions for efficient organic photovoltaic cells10.1002/adma.201002454 ↗
26. Effects of surface treatment on work function of ITO (Indium Tin Oxide) films
27. Photo-degradation of the indium tin oxide (ITO)/organic interface in organic optoelectronic devices and a new outlook on the role of ITO surface treatments and interfacial layers in improving device stability10.1016/j.orgel.2012.06.017 ↗
28. Simultaneous oxygen plasma and thermal treatments of an ITO surface to improve the electrical characteristics of organic light-emitting diodes10.3938/jkps.51.956 ↗
29. A simple parallel tandem organic solar cell based on metallophthalocyanines10.1063/1.3579250 ↗
30. Heteromorphic chloroindium phthalocyanine films for improved photovoltaic performance10.1016/j.solmat.2011.06.006 ↗
31. Photovoltaic properties of M-phthalocyanine/fullerene organic solar cells10.1016/j.solener.2012.03.019 ↗
32. Intermolecular charge-transfer excitation in C60 films: evidence from luminesence and photoconductivity10.1103/PhysRevB.52.R11665 ↗
33. Efficiency improvements in single-heterojunction organic photovoltaic cells by insertion of wide-bandgap electron-blocking layers10.1016/j.sse.2012.04.025 ↗
34. Vacuum level alignment in organic guest–host systems10.1063/1.1487917 ↗
35. Effect of electron transport layer materials on the performance of copper phthalocyanine/fullerene heterojunction with function of organic solar cells10.1016/j.jnoncrysol.2010.06.022 ↗
36. HOMO/LUMO alignment at PTCDA/ZnPc and PTCDA/ClInPc heterointerfaces determined by combined UPS and XPS measurements10.1021/jp982834y ↗
37. Improved efficiency of organic light-emitting devices employing bathocuproine doped in the electron-transporting layer
38. Red fluorescent organic light-emitting diodes using modified pyran-containing DCJTB derivatives10.5012/bkcs.2010.31.10.2884 ↗
39. Open circuit voltage and IV curve shape of ZnPc:C60 solar cells with varied mixing ratio and hole transport layer10.1117/1.3556726 ↗