Development, characterization, and processing of thin and thick inkjet-printed dielectric films
Source abstract
Abstract
This work introduces the material and electrical characterization of two dielectric inks for use with inkjet printing fabrication and the realization of fully-printed multilayer electronic structures. The dielectric inks are categorized by the thickness of their per-layer profiles, where SU-8 polymer and poly(4-vinylphenol)-based solutions are utilized to realize thick (>4 μm) and thin (< 400 nm) inkjet-printed dielectric films, respectively. The material formulations for each ink are outlined in detail in order to achieve the desired viscosity and surface tension for optimal printing with a Dimatix inkjet printing system. Once printability and processing techniques are tuned and established, various material and electrical characterizations are performed, including printed profile measurement, multilayer profile tendencies, thermal reflow processing, UV-ozone surface energy modification, relative permittivity extraction, leakage current density, and dielectric breakdown voltage. Finally, the demonstration of fully-printed post-processed on-chip capacitors utilizing both thin and thick dielectric inks in conjunction with a silver nanoparticle-based metallic ink is presented and compared with other inkjet-printed capacitors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Electrowetting and Microfluidic Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. All-inkjet-printed electrical components and circuit fabrication on a plastic substrate10.1016/j.mee.2012.03.032 ↗
2. Multi-layer rf capacitors on flexible substrates utilizing inkjet printed dielectric polymers10.1109/LMWC.2013.2264658 ↗
3. Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing10.1016/j.sna.2006.04.036 ↗
4. Printed organic transistors for ultra-low-cost rfid applications10.1109/TCAPT.2005.859672 ↗
5. Multilayer inkjet printing of millimeter-wave proximity-fed patch arrays on flexible substrates10.1109/LAWP.2013.2286003 ↗
6. Fully inkjet-printed multilayer microstrip patch antenna for Ku-band applications
7. Post-process fabrication of multilayer mm-wave on-package antennas with inkjet printing
8. Inkjet-printed, vertically-integrated, high-performance inductors and transformers on flexible lcp substrate
9. Fully inkjet-printed multilayer microstrip and t-resonator structures for the RF characterization of printable materials and interconnects
10. Dielectric microwave characterization of the su-8 thick resin used in an above ic process
11. Su-8: a photoresist for high-aspect-ratio and 3d submicron lithography10.1088/0960-1317/17/6/R01 ↗
12. Characterization of the polymerization of su-8 photoresist and its applications in micro-electro-mechanical systems (mems)10.1016/S0142-9418(01)00005-8 ↗
13. Direct inkjet printing of dielectric ceramic/polymer composite thick films10.1002/adem.201400451 ↗
14. State-of-the-art inkjet-printed metal-insulator-metal (mim) capacitors on silicon substrate10.1109/LMWC.2014.2365745 ↗
15. A low-temperature-cross-linked poly (4-vinylphenol) gate-dielectric for organic thin film transistors10.1016/j.tsf.2010.08.009 ↗
16. High-mobility polymer gate dielectric pentacene thin film transistors10.1063/1.1511826 ↗
17. Efficient inkjet printing of graphene10.1002/adma.201300361 ↗
18. Inkjet printing of 3d metal-insulator-metal crossovers10.1016/j.reactfunctpolym.2008.02.007 ↗
19. Leakage current-voltage characteristcs of ferroelectric thin film capacacitors
20. Static solvent contact angle measurements, surface free energy and wettability determination of various self-assembled monolayers on silicon dioxide10.1016/j.tsf.2006.04.006 ↗
21. All inkjet printed (3d) microwave capacitors and inductors with vias
22. All-inkjet-printed metal-insulator-metal (mim) capacitor10.1016/j.cap.2011.04.035 ↗
23. Y. Li, R. Torah, S. Beeby, J. Tudor, An all-inkjet printed flexible capacitor for wearable applications, in: Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 2012 Symposium on, 2012.