A comprehensive review on the reasons behind low power conversion efficiency of dibenzo derivatives based donors in bulk heterojunction organic solar cells
Source abstract
Abstract
Abstract Small molecules and polymer derivatives based on fused ring system of dibenzo[b,d]thiophene, dibenzo[b,d]silole, dibenzo[b,d]furan, dibenzo[b,d]germole, dibenzo[b,d]selenophene and dibenzo[b,d]tellurophene are efficient donor (D) materials for bulk heterojunction organic solar cell (BHJ-OSCs) applications. Dibenzo based hetero-tricyclic fused ring systems showed poor PCE than other ring system due to low π-conjugation, disorder in structure, poor solubility, higher d-spacing of π-π stacking in thin film state, low hole mobility and air stability. To further improve the power conversion efficiency (PCE) of fused ring derivatives, we have to incorporate heteroatoms (P-block elements N, S, Si, Ge, Ga, Sn, and Se) and tailor three member ring based donor system. This review briefly summarizes the data on fused ring system based small molecules or polymers for BHJ-OSCs application and gives suggestion to design new donor materials with desired properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Light emitting diodes based on conjugated polymers10.1038/347539a0 ↗
2. Thermally stable polymer memory devices based on a π-conjugated triad
3. All solution processed organic solar cells with conventional architecture10.1016/j.solmat.2013.06.033 ↗
4. Device structure consisted polymer photovoltaic cells : enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
5. Polymer memories: bistable electrical switching and device performance10.1016/j.polymer.2007.06.025 ↗
6. Itrs · 2011
7. Light harvesting in organic solar cells10.1016/j.solmat.2010.12.008 ↗
8. A design strategy for intramolecular singlet fission mediated by charge transfer states in donor-acceptor organic materials10.1038/nmat4175 ↗
9. Band gap tunable, donor-acceptor-donor charge-transfer heteroquinoid based chromophores: near infrared photoluminescence and electroluminescence10.1021/cm801911n ↗
10. Controlled intramolecular charge transfer using a sulfur containing acceptor group10.1021/acs.jpcc.5b09826 ↗
11. Enhancement of processability, stability and photoluminescence performance of poly(p-phenylene vinylene) containing diazine heterocycle unit10.1007/s12221-012-1105-9 ↗
12. A solar test collector for evaluation of both selective and non-selective absorbers10.1002/er.4440110310 ↗
13. Exciton diffusion in organic photovoltaic cells10.1039/C3EE42444H ↗
14. Synthesis and characterization of new indeno[1,2-b]indole-co-benzothiadiazole based π-conjugated ladder type polymers for bulk heterojunction polymer solar cells10.1016/j.polymer.2013.07.004 ↗
15. Efficient bulk heterojunction photovoltaic cells using small molecular weight organic thin films10.1038/nature01949 ↗
16. Electroluminescent conjugated polymers seeing polymers in a new light10.1002/(SICI)1521-3773(19980302)37:4<402::AID-ANIE402>3.0.CO;2-9 ↗
17. Review of carbazole based conjugated molecules for highly efficient organic solar cell application10.1016/j.tetlet.2015.12.057 ↗
18. Review: fullerene based acceptors for efficient bulk heterojunction organic solar cell applications10.1016/j.solmat.2016.11.024 ↗
19. Advances in crystalline silicon solar cell technology for industrial mass production10.1038/asiamat.2010.82 ↗
20. Review of materials and manufacturing options for large area flexible dye solar cells10.1016/j.rser.2011.06.004 ↗
21. Dye sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
22. Highly efficient dye sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
23. Single material solar cells: the next frontier for organic photovoltaics10.1002/aenm.201000008 ↗
24. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
25. Locking in optimal nanoscale structure induced by naphthalenediimide based polymeric additive enables efficient and stable inverted polymer solar cells10.1021/acsnano.7b03684 ↗
26. Environmentally printing efficient organic tandem solar cells with high fill factors: a guideline towards 20% power conversion efficiency10.1002/aenm.201400084 ↗
27. Simultaneous enhancement of short-circuit current density, open circuit voltage and fill factor in ternary organic solar cells based on PTB7-Th:IT-M:PC71BM10.1016/j.solmat.2018.03.014 ↗
28. Enhanced electron transport enables over 12% efficiency by interface engineering of non-fullerene organic solar cells10.1016/j.solmat.2018.08.010 ↗
29. Perovskite solar Cells : potentials, challenges, and opportunities10.1155/2015/592308 ↗
30. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
31. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
32. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
33. Influence of side chain position on the electrical properties of organic solar cells based on dithienylbenzothiadiazole-alt-phenylene conjugated polymers10.1021/acs.macromol.5b00589 ↗
34. Which electrode materials to select for more environmentally friendly organic photovoltaics10.1002/adem.201500509 ↗
35. Synthesis and studies of methyl ester substituted thieno-o-quinodimethane fullerene multiadducts for polymer solar cells10.1016/j.solmat.2013.01.040 ↗
36. Synthesis, characterization of bay-substituted perylene diimide based D-A-D type small molecules and their applications as a non-fullerene electron acceptor in polymer solar cells10.1016/j.jsamd.2017.11.005 ↗
37. Non-fullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
38. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells10.1039/C7CS00892A ↗
39. The role of hydrogen bonding in bulk-heterojunction (BHJ) solar cells: a review10.1016/j.solmat.2018.03.013 ↗
40. Selenophene bearing low band gap conjugated polymers : tuning optoelectronic properties via fluorene and carbazole as donor moieties
41. A planar small molecule with dithienosilole core for high efficiency solution-processed organic photovoltaic cells10.1021/cm202588h ↗
42. Lee · 1999
43. Phosphorescent co-crystals assembled by 1,4-diiodotetra fluorobenzene and fluorene and its heterocyclic analogues based on C− I•••π halogen bonding10.1021/cg300515a ↗
44. Huheey · Inorg. Chem. · 2012 · 4ed
45. Pauling
46. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
47. Streamlined microwave assisted preparation of narrow bandgap conjugated polymers for high performance bulk heterojunction solar cells10.1038/nchem.403 ↗
48. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells10.1021/ja1112595 ↗
49. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
50. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
51. Polarons, bipolarons and solitons in conducting polymers
52. Angmo · 2014
53. Tunable novel cyclopentadithiophene-based copolymers containing various numbers of bithiazole and thienyl units for organic photovoltaic cell applications10.1021/ma900416d ↗
54. Synthesis and characterization of indenofluorene based copolymers containing 2,5-bis(2-thienyl)-n-arylpyrrole for bulk heterojunction solar cells and polymer light emitting diodes10.1002/pola.24101 ↗
55. Thermotropic liquid crystalline-cum-photocrosslinkable poly (benzylidene arylphosphate ester)s containing the cyclopentanone moiety10.1080/02678290600563153 ↗
56. The effect of acceptor end groups on the physical and photovoltaic properties of A-π-D-π-A type oligomers with same S, N-heteropentacene central electron donor unit for solution processed organic solar cells10.1016/j.dyepig.2016.02.029 ↗
57. Solution-processable single material molecular emitters for organic light emitting devices10.1039/c1cs15016b ↗
58. Bistable electrical switching and electronic memory effect in a solution-processable graphene oxide donor polymer complex10.1063/1.3276556 ↗
59. Received, Design and synthesis of solution processable small molecules towards high photovoltaic performance10.1039/C0JM02510K ↗
60. Combination of molecular, morphological, and interfacial engineering to achieve highly efficient and stable plastic solar cells10.1002/adma.201103945 ↗
61. CASSCF/CASPT2 and TD-DFT study of valence and rydberg electronic transitions in fluorene, carbazole, dibenzofuran, and dibenzothiophene10.1021/jp201618a ↗
62. Highly efficient fluorene and benzothiadiazole based conjugated copolymers for polymer light emitting diodes10.1021/ma020405z ↗
63. Dispersive electron transport in an electroluminescent polyfluorene copolymer measured by the current integration time-of-flight method10.1063/1.1406143 ↗
64. Polymer solar cells based on a low-bandgap fluorene copolymer and a fullerene derivative with photocurrent extended to 850 nm10.1002/adfm.200400416 ↗
65. Design, synthesis and properties of low band gap polyfluorenes for photovoltaic devices10.1016/j.synthmet.2005.07.011 ↗
66. An alternating copolymer of fluorene donor and quinoxaline acceptor versus a terpolymer consisting of fluorene, quinoxaline and benzothiadiazole building units: synthesis and characterization10.1007/s00289-015-1541-y ↗
67. High photovoltage achieved in low band gap polymer solar cells by adjusting energy levels of a polymer with the LUMOs of fullerene derivatives10.1039/b811957k ↗
68. Synthesis and characterization of conjugated oligoelectrolytes based on fluorene and carbazole derivative and application of polymer solar cell as a cathode buffer layer10.1007/s13233-015-3042-0 ↗
69. The incorporation of thermionic emission and work function tuning layer into intermediate connecting layer for high performance tandem organic solar cells10.1016/j.nanoen.2016.01.002 ↗
70. Carbazole linked phenylquinoline based fullerene derivatives as acceptors for bulk heterojunction polymer solar cells:effect of interfacial contacts on device performance10.1039/c4ta00013g ↗
71. Distinct annealing temperature in polymer:fullerene:polymer ternary blend solar cells10.1021/jp809589n ↗
72. Novel D-A-D type dyes based on BODIPY platform for solution processed organic solar cells10.1016/j.dyepig.2016.01.020 ↗
73. A fluorene-fused triphenodioxazine (FTPDO) based polymer with remarkable thermal stability and significantly enhanced charge transport performance in air10.1016/j.dyepig.2016.05.011 ↗
74. Extension of light-harvesting area of bulk-heterojunction solar cells by cosensitization with ring expanded metallophthalocyanines fused with fluorene skeletons10.1021/am4005896 ↗
75. Synthesis and photovoltaic studies on novel fluorene based cross-conjugated donor-acceptor type polymers
76. Novel red emitting fluorene based copolymers10.1039/b203862e ↗
77. Fluorene based low bandgap copolymers for high performance photovoltaic devices10.1063/1.1667614 ↗
78. High performance polymer solar cells of an alternating polyfluorene copolymer and a fullerene derivative10.1002/adma.200304150 ↗
79. Determining the internal quantum efficiency of highly efficient polymer solar cells through optical modeling10.1063/1.2718488 ↗
80. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗
81. Low bandgap alternating fluorene copolymer/methanofullerene heterojunctions in efficient near-infrared polymer solar cells10.1002/adma.200600124 ↗
82. Infrared photocurrent spectral response from plastic solar cell with low band gap polyfluorene and fullerene derivative10.1063/1.1825070 ↗
83. High band gap poly(9,9-dihexylfluorene-alt-bithiophene) blended with [6,6]-phenyl C61 butyric acid methyl ester for use in efficient photovoltaic devices10.1063/1.3070574 ↗
84. Conjugated polymers bearing iridium complexes for triplet photovoltaic devices10.1021/cm800955f ↗
85. Direct (hetero)arylation polymerization of a spirobifluorene and a dithienyl-diketopyrrolopyrrole derivative: new donor polymers for organic solar cells10.3390/molecules23040962 ↗
86. Carbazole-containing polymers: synthesis, properties and applications10.1016/S0079-6700(03)00036-4 ↗
87. Wide band gap cross-linkable semiconducting polymer LED10.1016/j.synthmet.2007.08.018 ↗
88. Enhancement of electroluminescence utilizing confined energy transfer for red light emission10.1016/S0040-6090(01)01128-2 ↗
89. 2,7-Carbazolenevinylene based oligomer thin film transistors: high mobility through structural ordering10.1002/adfm.200500168 ↗
90. Charge transport, photovoltaic, and thermoelectric properties of poly(2,7-carbazole) and poly(indolo[3,2-b]carbazole)
91. An A-D-A small molecule based on the 3,6-dithienylcarbazole electron donor(D) unit and nitrophenyl acrylonitrile electron acceptor(A) units for solution processed organic solar cells10.1039/C2TA00749E ↗
92. Thioalkyl substituted benzothiadiazole acceptors: copolymerization with carbazole affords polymers with large Stokes shifts and high solar cell voltages10.1021/ma5000943 ↗
93. Carbazole and thienyl benzo[1,2,5]thiadiazole based polymers with improved open circuit voltages and processability for application in solar cells10.1039/c1jm12089a ↗
94. Synthesis of new pyridazine based monomers and related polymers for photovoltaic applications10.1002/marc.201000038 ↗
95. Synthesis of carbazole-based copolymers containing carbazole thiazolo[5,4-d]thiazole groups with different dopants and their fluorescence and electrical conductivity applications10.1039/C6RA08888K ↗
96. Synthesis and studies of carbazole based donor polymer for organic solar cell applications10.1007/s00396-018-4337-4 ↗
97. Design and chemical engineering of carbazole based donor small molecules for organic solar cell applications10.1007/s10854-018-9621-z ↗
98. Carbazole-phenylbenzotriazole copolymers as absorber material in organic solar cells10.1021/ma400440q ↗
99. High open circuit voltage solar cells based on new thieno[3,4-c]pyrrole-4,6-dione and 2,7-carbazole copolymers10.1021/ma202540j ↗
100. Synthesis and photovoltaic properties of quinoxaline based alternating copolymers for high efficiency bulkheterojunction polymer solar cells10.1021/ma102943g ↗