journal article·2017-06

Novel perylene diimide based polymeric electron-acceptors containing ethynyl as the π-bridge for all-polymer solar cells

Huan Chang, Zhiming Chen, Xiye Yang, Qingwu Yin, Jie Zhang, Lei Ying, Xiao-Fang Jiang, Baomin Xu, Fei Huang, Yong Cao

Publisher page

Abstract

Abstract We designed and synthesised two n-type donor-acceptor copolymers based on perylenediimide (PDI). These copolymers contained an ethynyl moiety as the π-bridge between PDI and the electron-donating unit of either benzodithiophene (BDT) or fluorine (F), with the corresponding polymers denoted as PPDI-BDT and PPDI-F, respectively. The molecular geometry and the optical and electrochemical properties of the polymers were affected by the electron-donating unit. Both copolymers exhibited relatively broad light-absorption profiles and deep lowest unoccupied molecular orbital energy levels of about −3.8 eV. All-polymer solar cells (all-PSCs) were fabricated using these copolymers as the electron-accepting material and a medium-bandgap conjugated polymer, PBDB-T, as the electron-donating material. The resulting all-PSC based on PPDI-F exhibited a power conversion efficiency of 5.09%, which is significantly higher than that of the device fabricated using PPDI-BDT (2.73%). This improvement was attributed to the higher open-circuit voltage, greater charge carrier mobility and more effective charge transfer of the PBDB-T:PPDI-F blend film. These results suggest that the developed n-type PDI-based copolymers are promising candidates as electron-accepting materials for the construction of high-performance all-polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
2. A novel naphtho[1,2-c:5,6-c']bis([1,2,5]thiadiazole)-based narrow-bandgap π-conjugated polymer with power conversion efficiency over 10%10.1002/adma.201603178 ↗
3. Diketopyrrolopyrrole polymers for organic solar cells10.1021/acs.accounts.5b00334 ↗
4. Enhanced photovoltaic performance of indacenodithiophene-quinoxaline copolymers by side-chain modulation10.1002/aenm.201400680 ↗
5. High-performance photovoltaic polymers employing symmetry-breaking building blocks10.1002/adma.201602857 ↗
6. High-performance polymer solar cells based on a wide-bandgap polymer containing pyrrolo[3,4-f]benzotriazole-5,7-dione with a power conversion efficiency of 8.63%10.1002/advs.201600032 ↗
7. Design and application of highly efficient polymers for polymer solar cells
8. Ternary-blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
9. Polymer-fullerene bulk-heterojuction solar cells10.1002/adma.200801283 ↗
10. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
11. Alkyl side-chain engineering in wide-bandgap copolymers leading to power conversion efficiencies over 10%10.1002/adma.201604251 ↗
12. Ternary organic solar cells based on two compatible nonfullerene acceptors with power conversion efficiency > 10%10.1002/adma.201602570 ↗
13. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
14. An electron deficient buiding block based on the B←N unit: an electron acceptor for all polymer solar cells10.1002/anie.201508482 ↗
15. An alternating polymer of two buiding blocks based on B←N unit: non-fullerene acceptor for organic photovoltaics10.1007/s10118-017-1878-9 ↗
16. High performance solution processed non-fullerene organic solar cells based on selenophene containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
17. All-polymer solar cells from perylene diimide based copolymers: material design and phase separation control10.1002/anie.201005408 ↗
18. New polymer acceptors for organic solar cells: the effect of regio-regularity and device configuration10.1039/c3ta10864c ↗
19. Synthesis and application of poly(fluorene-alt-naphthalene diimide) as an N-Type polymer for all-polymer solar cells10.1039/c2cc31752d ↗
20. Polymer acceptor based on double B←N bridged bipyridine (BNBP) unit for high-efficiency all-polymer solar cells10.1002/adma.201601205 ↗
21. All-polymer bulk heterojuction solar cells with 4.8% efficiency achieved by solution processing from a Co-Solvent10.1002/adma.201401490 ↗
22. Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material10.1039/C6TA05932E ↗
23. Synthesis and photovoltaic properties of an N-Type two-dimension-conjugated polymer based on perylene diimide and benzodithiophene with thiophene conjugated side chains10.1039/C5TA05014F ↗
24. 7.7% efficient all-polymer solar cells10.1002/adma.201501604 ↗
25. N-type semiconducting naphthalene diimide-perylene diimide copolymers: controlling crystallinity, blend morphology, and compatibility toward high-performance all-polymer solar cells10.1021/ja513260w ↗
26. All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%10.1002/adma.201504629 ↗
27. Polymer acceptor based on B←N units with enhanced electron mobility for efficient all-polymer solar cells10.1002/anie.201601305 ↗
28. Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45%10.1039/C3EE43041C ↗
29. Perylene and naphthalene diimide polymers for all-polymer solar cells: a comparative study of chemical copolymerization and physical blend10.1039/C5PY00665A ↗
30. Green-solvent-processed all-polymer solar cells containing a perylene diimide-based acceptor with an efficiency over 6.5%10.1002/aenm.201501991 ↗
31. New π-conjugated polymers as acceptors designed for all polymer solar cells based on imide/amide-derivatives10.1039/C5TC02615F ↗
32. Non-planar perylenediimide acceptors with different geometrical linker units for efficient non-fullerene organic solar cells10.1039/C6TA08739F ↗
33. High performance organic solar cells based on a twisted bay-substituted tetraphenyl functionalized perylenediimide electron acceptor10.1002/aenm.201500032 ↗
34. Triphenylamine-cored star-shape compounds as non-fullerene acceptor for high-efficiency organic solar cells: tuning the optoelectronic properties by S/Se-Annulated perylene diimide10.1016/j.orgel.2016.10.044 ↗
35. A vinylene-bridged perylenediimide-based polymeric acceptor enabling efficient all-polymer solar cells processed under ambient conditions10.1002/adma.201602387 ↗
36. Development and structure/property relationship of new electron accepting polymers based on thieno[2',3':4,5]pyrido[2,3-g]thieno[3,2-c]quinoline-4,10-dione for all-polymer solar cells10.1021/acs.chemmater.5b01928 ↗
37. All-polymer solar cells with bulk heterojunction films containing electron-accepting triple bond-conjugated perylene diimide polymer10.1021/acssuschemeng.5b00732 ↗
38. D-π-A-π-D-Type low band gap diketopyrrolopyrrole based small molecules containing an ethynyl-linkage: synthesis and photovoltaic properties10.1039/C5RA01946J ↗
39. Deep absorbing porphyrin small molecule for high-performance organic solar cells with very low energy losses10.1021/jacs.5b03740 ↗
40. Novel phenyl-oligothiophene derivatives containing acetylenic spacers for thin film materials: synthesis, photophysical and morphology properties10.1016/j.dyepig.2012.12.012 ↗
41. Solution-processable low-molecular weight extended arylacetylenes: versatile P-Type semiconductors for field-effect transistors and bulk heterojunction solar cells10.1021/ja910420t ↗
42. Synthesis and photovoltaic response of a solution-processable dithienyldiketopyrrolopyrrole-based molecular semiconductor with thienylvinylthienyl endgroups10.1117/1.JPE.5.057211 ↗
43. Effective modulation of an aryl acetylenic molecular system based on dithienyldiketopyrrolopyrrole for organic solar cells10.1039/C5TC03844H ↗
44. Green chemistry for organic solar cells10.1039/c3ee41096j ↗
45. Stille polycondensation for synthesis of functional materials10.1021/cr100320w ↗
46. From lab to fab: how must the polymer solar cell materials design Change? - an industrial perspective10.1039/c3ee43460e ↗
47. Acceptor-acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all-polymer solar cells10.1002/pola.27108 ↗
48. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
49. Synthesis of medium-bandgap π-conjugated polymers based on isomers of 5-alkylphenanthridin-6(5H)-one and 6-alkoxylphenanthridine10.1002/pola.28079 ↗
50. Water/alcohol soluble conjugated polymers for the interface engineering of highly efficient polymer light-emitting diodes and polymer solar cells10.1039/C4CC09433F ↗