Ultra-low power non-volatile resistive crossbar memory based on pull up resistors
Source abstract
Abstract
To realize a flexible and ultra-low power non-volatile resistive random access memory (NVRRAM), we propose a 3 × 3 resistive memory array comprised of crossbar memristors and a pull-up resistor connected to each column bar (1R-CM). This architecture forms a voltage divider network, which directly reads a parallel data of a row in the form of voltage instead of current. In the proposed structure, the optimum value of the pull-up resistor was found to be 10 MΩ. Poly(4-vinylphenol) (PVP) material is utilized in the memristor to achieve high OFF/ON resistance ratio of ∼1000 as a high resistance state (HRS) is 10 GΩ and a low resistance state (LRS) is 10 MΩ. The operating voltage for writing and reading are ±2 V and 0.5 V in current bound of 10–100 nA, respectively, and consumes ultra-low power (<8.33 nW) during operation. The proposed memory demonstrates bendability down to 10 mm with bending endurance of 1000 cycles and retention time for more than 180 days. It is fabricated on a plastic substrate by using direct-printing technique electrohydrodynamic (EHD) at ambient conditions that can be used in wearable electronics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Transition Metal Oxide Nanomaterials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Solitons in conducting polymers10.1103/RevModPhys.60.781 ↗
2. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
3. Organic nonvolatile memory transistors for flexible sensor arrays10.1126/science.1179963 ↗
4. Printed nonvolatile memory for a sheet-type communication system10.1109/TED.2009.2015169 ↗
5. Low-power high-performance non-volatile memory on a flexible substrate with excellent endurance10.1002/adma.201002946 ↗
6. Why is CMOS scaling coming to an END?
7. Reaching the limits of CMOS technology, electrical performance of electronic packaging
8. Memristor-The missing circuit element10.1109/TCT.1971.1083337 ↗
9. The missing memristor found10.1038/nature06932 ↗
10. A low-temperature-grown TiO2-based device for the flexible stacked RRAM application10.1088/0957-4484/21/11/115203 ↗
11. High-density crossbar arrays based on a Si memristive system10.1021/nl8037689 ↗
12. Low-temperature-Grown transition metal oxide based storage materials and oxide transistors for high-density non-volatile memory10.1002/adfm.200801032 ↗
13. Sub-nanosecond switching of a tantalum oxide memristor10.1088/0957-4484/22/48/485203 ↗
14. Sub-nanosecond switching of a tantalum oxide memristor10.1088/0957-4484/22/48/485203 ↗
15. A low-temperature-grown TiO 2 -based device for the flexible stacked RRAM application10.1088/0957-4484/21/11/115203 ↗
16. Measuring the switching dynamics and energy efficiency of tantalum oxide memristors10.1088/0957-4484/22/50/505402 ↗
17. Anatomy of a nanoscale conduction channel reveals the mechanism of a high-performance memristor10.1002/adma.201103379 ↗
18. Rewritable switching of one diode–one resistor nonvolatile organic memory devices10.1002/adma.200903203 ↗
19. One transistor–one resistor devices for polymer non-volatile memory applications10.1002/adma.200803798 ↗
20. Complementary resistive switches for passive nanocrossbar memories10.1038/nmat2748 ↗
21. Organic non-volatile memory cell based on resistive elements through electro-hydrodynamic technique10.1016/j.orgel.2014.11.028 ↗
22. Design of versatile printed organic resistor based on resistivity (ρ) control10.1007/s00339-015-9127-y ↗
23. Memory effect in thin films of insulating polymer and C 60 nanocomposites10.1088/0957-4484/17/1/023 ↗
24. Memory stabilities and mechanisms of organic bistable devices with a phase-separated poly(methylmethacrylate)/poly(3-hexylthiophene) hybrid layer10.1016/j.orgel.2012.06.004 ↗
25. Melsa · 1978