Thickness dependent device characteristics of sandwich polymer light-emitting electrochemical cell
Source abstract
Abstract
Abstract The polymer light-emitting electrochemical cell (LEC) is an attractive alternative to the widely studied polymer light-emitting diodes (PLEDs) for possible lighting and display applications. The main advantage of an LEC is its relative insensitivity to electrode work function and active layer thickness. While this is true when compared to a PLED, we show that active layer thickness can strongly influence several key LEC performance parameters. Sandwich LECs exhibit vastly different device characteristics when the active layer thickness is varied from approximately 75 nm to 1206 nm. Maximum luminance, current efficiency (in cd/A) and operating lifetime are all strongly thickness dependent. The 75 nm LEC shows artificially slow turn on due to the presence of micro-shorts. The 1206 nm LEC exhibits a peculiar partial recovery of luminance after prolonged operation. We attribute the thickness dependent LEC characteristics to variations in doping levels. Our results suggest that the active layer thickness of sandwich LECs is a non-trivial parameter that should be carefully optimized and studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Electroluminescence in conjugated polymers10.1038/16393 ↗
2. Carrier tunneling and device characteristics in polymer light-emitting-diodes10.1063/1.356350 ↗
3. Improved quantum efficiency for electroluminescence in semiconducting polymers10.1038/17087 ↗
4. Polymer light-emitting electrochemical-cells10.1126/science.269.5227.1086 ↗
5. Polymer light-emitting electrochemical cells: in situ formation of a light-emitting p–n junction10.1021/ja953695q ↗
6. Visualization of electrochemical doping and light-emitting junction formation in conjugated polymer films10.1063/1.1702126 ↗
7. Improving the efficiency of polymer light-emitting electrochemical cells by controlled doping relaxation10.1063/1.2195967 ↗
8. Efficient blue-green and white light-emitting electrochemical cells based on poly 9,9-bis(3,6-dioxaheptyl)-fluorene-2,7-diyl10.1063/1.364313 ↗
9. Polymer light-emitting electrochemical cells with frozen p–i–n junction at room temperature10.1002/(SICI)1521-4095(199803)10:5<385::AID-ADMA385>3.0.CO;2-M ↗
10. Efficient, fast response light-emitting electrochemical cells: electroluminescent and solid electrolyte polymers with interpenetrating network morphology10.1063/1.116442 ↗
11. Planar polymer light-emitting electrochemical cells with extremely large interelectrode spacing10.1063/1.1618948 ↗
12. Miscibility and luminescence properties of MEH-PPV/DPO-PPV polyblends10.1007/s10965-005-9017-7 ↗
13. The effect of annealing/quenching on the performance of polymer light-emitting electrochemical cells10.1016/j.orgel.2007.12.006 ↗
14. Lifetime and degradation effects in polymer light-emitting diodes10.1063/1.369564 ↗
15. Yellow-green light-emitting electrochemical cells with long lifetime and high efficiency10.1063/1.3299018 ↗
16. Light degradation and voltage drift in polymer light-emitting diodes10.1063/1.1355013 ↗
17. Lifetime study of polymer light-emitting electrochemical cells10.1063/1.2357862 ↗
18. Electroluminescence lifetime and efficiency of polymer LEDs with surface-treated anodes10.1016/S0379-6779(98)01354-X ↗
19. Electrochemical and optical characterization of p- and n-doped poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]10.1063/1.1949188 ↗
20. On the limited operational lifetime of light-emitting electrochemical cells10.1002/adma.200702595 ↗
21. Direct observation of a frozen junction in polymer light-emitting electrochemical cells10.1063/1.1900943 ↗
22. How electrode work function affects doping and electroluminescence of polymer light-emitting electrochemical cells10.1002/adma.200800068 ↗
23. The influence of electrodes on the performance of light-emitting electrochemical cells10.1016/j.electacta.2007.04.068 ↗
24. Steady state model for polymer light-emitting electrochemical cells10.1063/1.363966 ↗
25. Polymer light-emitting electrochemical cells: a theoretical study of junction formation under steady-state conditions10.1021/jp973415o ↗
26. Model of the electrochemical conversion of an undoped organic semiconductor film to a doped conductor film10.1103/PhysRevB.81.081203 ↗
27. A unifying model for the operation of light-emitting electrochemical cells10.1021/ja1045555 ↗
28. Speedup of doping fronts in organic semiconductors through plasma instability10.1103/PhysRevLett.107.016103 ↗
29. Long-lifetime polymer light-emitting electrochemical cells10.1002/adma.200602087 ↗
30. Long-lifetime polymer light-emitting electrochemical cells fabricated with crosslinked hole-transport layers10.1002/adma.200803698 ↗
31. The design and realization of flexible, long-lived light-emitting electrochemical cells10.1002/adfm.200900479 ↗
32. Quest for an appropriate electrolyte for high-performance light-emitting electrochemical cells10.1021/jz1010797 ↗
33. Encapsulating light-emitting electrochemical cells for improved performance10.1063/1.4714696 ↗
34. Organic electroluminescent devices with improved stability10.1063/1.117151 ↗