Solution processing of alternating PDMS/SiOx multilayer for encapsulation of organic light emitting diodes
Source abstract
Abstract
Dilution of spin-coating solution of UV-curable polydimethylsiloxane (PDMS) precursor with decamethylcyclopentasiloxane (D5) is able to reduce thickness of the resulting PDMS layer to ca. 100 nm without changing its quality to allow partial photochemical conversion to dense, crack- and pinhole-free inorganic SiOx upon its exposure to vacuum UV (VUV) light with a high photon energy (λ = 172 nm, Eph = 7.2 eV) within 3 min to achieve a facile formation of a PDMS/SiOx double layer. The process of conversion of PDMS to SiOx is clearly understood as monitored by multiple analytical methods used in this study. Since D5 does not attack the materials used for organic light emitting diodes (OLEDs) and the whole process is carried out without water, O2 and at room temperature, this newly developed all solution-based processing is ideally suited to fabrication of thin film encapsulation (TFE) that can be integrated in roll-to-roll (R2R) manufacturing of flexible thin film organic electronics devices. Preliminary test on the standardized OLED devices confirms the effectiveness of the solution-processed PDMS/SiOx alternating multiple layer as the TFE to extend their lifetime by 6 times under air and relative humidity of 50%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Recent progress in organic Electronics: materials, devices, and processes10.1021/cm049614j ↗
2. J. Thin-film organic electronic devices10.1146/annurev-matsci-082908-145433 ↗
3. Third-generation organic electroluminescence materials10.7567/JJAP.53.060101 ↗
4. Recent progress of high performance polymer OLED and OPV materials for organic printed electronics10.1088/1468-6996/15/3/034203 ↗
5. Flexible OLED using plastic barrier film and its roll-to-roll manufacturing10.1002/j.2168-0159.2014.tb00029.x ↗
6. Roll-to-Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
7. High efficiency in a solution-processed thermally activated delayed-fluorescence device using a delayed-fluorescence emitting material with improved solubility10.1002/adma.201402188 ↗
8. Solution-processed multilayer small-molecule light-emitting devices with high-efficiency white-light emission10.1038/ncomms6756 ↗
9. Reliability and degradation of organic light emitting devices10.1063/1.112532 ↗
10. Degradation mechanism of small molecule-based organic light-emitting devices10.1126/science.283.5409.1900 ↗
11. Water vapor and oxygen degradation mechanisms in organic light emitting diodes10.1002/1616-3028(200104)11:2<116::AID-ADFM116>3.0.CO;2-B ↗
12. A new method for fabricating transparent barrier layers10.1016/S0040-6090(96)09202-4 ↗
13. Mechanisms of vapor permeation through multilayer barrier films: lag time versus equilibrium permeation10.1063/1.1768610 ↗
14. Moisture permeability through multilayered barrier films as applied to flexible OLED display10.1002/app.26863 ↗
15. Thin film encapsulation for flexible AM-OLED: a review10.1088/0268-1242/26/3/034001 ↗
16. Recent progress on thin-film encapsulation technologies for organic electronic devices10.1016/j.optcom.2015.08.021 ↗
17. Extremely high barrier performance of organic–inorganic nanolaminated thin films for organic light-emitting diodes10.1021/acsami.6b15404 ↗
18. formation of silica coatings from perhydropolysilazane using vacuum ultraviolet excimer lamp10.2109/jcersj.112.599 ↗
19. Conversion of perhydropolysilazane into a SiOx network triggered by vacuum ultraviolet irradiation: access to flexible, transparent barrier coatings10.1002/chem.200700351 ↗
20. Flexible metal-oxide devices made by room-temperature photochemical activation of sol–gel films10.1038/nature11434 ↗
21. Low-temperature photochemical conversion of organometallic precursor layers to titanium(IV) oxide thin films10.1021/acs.chemmater.6b02757 ↗
22. https://www.microresist.de/de/content/uv-curable-liquid-silicone-rubber-uv-pdms.
23. https://en.wikipedia.org/wiki/Decamethylcyclopentasiloxane.
24. Evaporation of decamethylcyclopentasiloxane (D5) from selected cosmetic products: implications for consumer exposure modeling10.1016/j.envint.2015.07.013 ↗
25. UV-irradiation induced modification of PDMS films investigated by XPS and spectroscopic ellipsometry10.1016/S0039-6028(03)00148-1 ↗
26. Photochemical modification of cross-linked poly(dimethylsiloxane) by irradiation at 172 nm10.1021/ma049747q ↗
27. Solid-state bonding of silicone elastomer to glass by vacuum oxygen plasma, atmospheric plasma, and vacuum ultraviolet light treatment10.1002/sia.3715 ↗
28. Vacuum-uv irradiation-based formation of methyl-Si-O-Si networks from poly(1,1-dimethylsilazane-co-1-methylsilazane)10.1002/chem.200801659 ↗
29. Optical constants of silica glass from extreme ultraviolet to far infrared at near room temperature10.1364/AO.46.008118 ↗
30. Gas sorption, diffusion, and permeation in poly(dimethylsiloxane)10.1002/(SICI)1099-0488(20000201)38:3<415::AID-POLB8>3.0.CO;2-Z ↗