journal article·2017-06

Enhanced ammonia sensing characteristics of tungsten oxide decorated polyaniline hybrid nanocomposites

S.B. Kulkarni, Y.H. Navale, S.T. Navale, N.S. Ramgir, A.K. Debnath, S.C. Gadkari, S.K. Gupta, D.K. Aswal, V.B. Patil

Publisher page

Abstract

Abstract Polyaniline (PAni)-tungsten oxide (WO 3 ) hybrid nanocomposites sensor have been lucratively synthesized by in-situ chemical oxidative polymerization method by entrapping tungsten oxide nanoparticles (10–50%) in the polyaniline matrix on precleaned glass substrate. The structural, morphological and surface composition elucidation of PAni-WO 3 hybrid nanocomposites were explored by X-ray diffraction (XRD) technique, field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS). The existence of WO 3 in PAni matrix and interaction between them was confirmed using XRD and Raman spectroscopy. The incorporation of WO 3 nanoparticles into the PAni matrix introduces porosity which enhanced gas sensing properties. The TEM image of PAni-WO 3 hybrid nanocomposite film exploded the average diameter of WO 3 nanoparticles ranging from 40 to 50 nm. Chemical composition of PAni-WO 3 hybrid nanocomposites was characterized by using X-ray photoelectron spectroscopy (XPS). In order to investigate the gas sensing parameter of PAni-WO 3 hybrid nanocomposite, hybrid nanocomposite film was exposed to different oxidizing gases (Cl 2 , NO 2 ) and reducing gases (NH 3 , H 2 S, CH 3 OH, C 2 H 5 OH) in range 5–100 ppm concentration of gas. It was observed that the sensors of PAni-WO 3 hybrid nanocomposites showed better sensitivity, selectivity, stability and reproducibility compared to pure PAni and pure WO 3 . PAni-WO 3 (50%) hybrid nanocomposite sensor operating at room temperature reveals maximum response of 158% towards 100 ppm of NH 3 gas and also capable to respond very little concentration of 5 ppm NH 3 gas with reasonable response of 24%. The gas sensing mechanism of the nanocomposites in presence of air and with target NH 3 gas atmosphere was discussed in detail with the help of energy band diagram. The interaction of NH 3 and NO 2 gas with PAni-WO 3 hybrid nanocomposite sensor was investigated by employing an impedance spectroscopy also.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Mesostructured SnO2 as sensing material for gas sensors10.1016/j.sse.2003.09.015 ↗
2. Nanocrystalline TiO2 thin films for NH3 monitoring: microstructural and physical characterization10.1007/s10854-011-0403-0 ↗
3. Novel method for fabrication of polyaniline–CdS sensor for H2S gas detection
4. Polypyrrole thin film: room temperature ammonia gas sensor10.1109/JSEN.2011.2112765 ↗
5. Highly selective and sensitive CdS thin film sensors for detection of NO2 gas10.1039/C4RA06531J ↗
6. Research into normal temperature gas-sensitive characteristics of polyaniline material10.1016/0925-4005(93)85004-T ↗
7. Polyaniline thin films for gas sensing10.1016/0925-4005(95)01725-9 ↗
8. Conducting polymer gas sensors10.1039/f19868201117 ↗
9. Conductivity switching in polypyrrole-coated textile fabrics as gas sensors10.1016/S0379-6779(98)80022-2 ↗
10. Effect of competitive doping on sensing properties of polypyrrole10.1039/a604780g ↗
11. Synthesis of multidimensional ZnO nanostructures in aqueous medium for the application of gas sensor10.1016/j.snb.2012.11.100 ↗
12. Counter-ion induced processibility of conducting polyaniline and of conducting polyblends of polyaniline in bulk polymers10.1016/0379-6779(92)90053-L ↗
13. Capacitive properties of PANI/MnO2 synthesized via simultaneous-oxidation route10.1016/j.jallcom.2012.04.006 ↗
14. Effect of camphor sulfonic acid doping on structural, morphological, optical and electrical transport properties on polyaniline-ZnO nanocomposites10.4236/snl.2012.21001 ↗
15. Construction of a polyaniline nanofiber gas sensor10.1021/ed085p1102 ↗
16. Fabrication and characterization of polyaniline based gas sensor by ultra-thin film technology10.1016/S0925-4005(01)00946-7 ↗
17. Electrical properties of polypyrrole gas sensors fabricated under various pretreatment conditions10.1016/j.snb.2003.06.002 ↗
18. Room temperature NO2 sensing properties of polythiophene films10.1016/j.synthmet.2014.06.017 ↗
19. Preparation of camphor-sulfonic acid doped PPy–NiO hybrid nanocomposite for detection of toxic nitrogen dioxide10.1016/j.synthmet.2015.08.018 ↗
20. Conducting polymers in electronic chemical sensors10.1038/nmat768 ↗
21. Chemical gas sensors based on organic semiconductor polypyrrole10.1080/10408340290765489 ↗
22. Polyaniline: electrochemistry and application to rechargeable batteries10.1016/0379-6779(87)90911-8 ↗
23. Polyaniline as an electrode of rechargeable battery10.1016/0379-6779(89)90584-5 ↗
24. Resistance of polyaniline films as a function of electrochemical potential and the fabrication of polyaniline based microelectronic devices10.1021/j100254a028 ↗
25. Nanostructures SnO2 thin films for NO2 gas sensing applications10.1016/j.ceramint.2013.04.047 ↗
26. Analysis of vapours and foods by means of an electronic nose based on a sol-gel metal oxide sensors array10.1016/S0925-4005(00)00496-2 ↗
27. Conduction model of metal oxide gas sensors10.1023/A:1014405811371 ↗
28. WO3 sputtered thin films for NOx monitoring10.1016/0925-4005(94)01563-W ↗
29. A semiconducting metal oxide sensor array for the detection of NOx and NH310.1016/S0925-4005(01)00680-3 ↗
30. Characterization of WO3 thin film chlorine sensors10.1016/S0925-4005(01)00711-0 ↗
31. Improvement of SO2 sensing properties of WO3 by noble metal loading10.1016/S0925-4005(01)00669-4 ↗
32. Measurements on room temperature gas sensing properties of CSA doped polyaniline–ZnO nanocomposites10.1016/j.measurement.2011.12.012 ↗
33. Ultra- sensitive polyaniline-iron oxide nanocomposite room temperature flexible ammonia sensor10.1039/C5RA11512D ↗
34. Hybrid cross- linked polyaniline-WO3 nanocomposite thin film for NOx gas sensing10.1166/jnn.2009.417 ↗
35. Synthesis, structural, compositional, morphological and optoelectronic properties of tungsten oxide thin films10.1007/s10854-014-2508-8 ↗
36. In situ Raman spectroelectrochemical study of electrocatalytic oxidation of ascorbate at polyaniline- and sulfonated polyaniline-modified electrodes10.1016/j.electacta.2006.03.011 ↗
37. Raman spectroelectrochemical study of polyaniline and sulfonated polyaniline in solutions of different pH10.1016/j.vibspec.2006.09.005 ↗
38. Nitrogen dioxide (NO2) sensing performance of p-polypyrrole/n-tungsten oxide hybrid nanocomposites at room temperature10.1016/j.orgel.2014.10.045 ↗
39. Room temperature triethylamine sensing properties of polyaniline-WO3 nanocomposites with p-n heterojunction10.1039/C5RA20843B ↗
40. Facile synthesis of highly photoactive α-Fe2O3-based films for water oxidation10.1021/nl202316j ↗
41. A study of the core level electrons in iron and its three oxides by means of x-ray photoelectron spectroscopy10.1088/0022-3727/16/5/005 ↗
42. An all-solid-state electrochromic device based on NiO/WO3 complementary structure and hybrid electrolyte10.1016/j.solmat.2009.06.025 ↗
43. Synthesis of nanostructured tungsten oxide thin films: a simple, controllable, inexpensive, aqueous sol-gel method10.1021/cg9010295 ↗
44. Novel route for fabrication of nanostructured α-Fe2O3 gas sensor10.1016/j.mssp.2013.08.016 ↗
45. Tungsten trioxide (WO3) sputtered thin films for a NOx gas sensor10.1016/S0925-4005(98)00149-X ↗
46. Development of nanostructured polyaniline-titanium dioxide gas sensors for ammonia recognition10.1002/app.35468 ↗
47. One-step fabrication of a polyaniline nanofiber vapor sensor10.1016/j.snb.2008.04.009 ↗