journal article·2013-06

Enhanced performance in inverted polymer solar cells via solution process: Morphology controlling of PEDOT:PSS as anode buffer layer by adding surfactants

Soo Won Heo, Kyeong Hoon Baek, Tae Ho Lee, Joo Young Lee, Doo Kyung Moon

Organic Electronics· Volume 14· Issue 6
Publisher page

Abstract

Abstract Inverted polymer solar cells were fabricated by adding the amphiphilic surfactant ‘Surfynol 104 series’ to Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a anode buffer layer by solution process. With the introduction of Surfynol 104 series-added PEDOT:PSS, it was able to form a homogeneous film by adjusting the wettability of a hydrophobic poly(3-hexylthiophene) (P3HT):[6,6]-phenyl C61-butyric acid methyl ester (PCBM) film. With decrease in series resistance (RS) and increase in shunt resistance (RSH), as a result, the short circuit current density (JSC), open circuit voltage (VOC) and fill factor (FF) of the optimized device were 10.2 mA/cm2, 0.63 V and 61.3%, respectively, calculated the power conversion efficiency (PCE) was 4.0%. In addition, the air stability of the fabricated device was improved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Synthesis and characterization of fluorene–thiophene based π-conjugated polymers using coupling reaction10.1016/j.jiec.2008.05.005 ↗
2. Patternable brush painting process for fabrication of flexible polymer solar cells10.1016/j.solmat.2011.09.012 ↗
3. Patternable solution process for fabrication of flexible polymer solar cells using PDMS10.1016/j.solmat.2011.09.012 ↗
4. Conjugated polymer consisting of quinacridone and benzothiadiazole as donor materials for organic photovoltaics: coplanar property of polymer backbone10.1021/ma301466m ↗
5. Synthesis and photovoltaic characterization of D/A structure compound based on N-substituted phenothiazine and benzothiadiazole10.1016/j.jiec.2012.08.033 ↗
6. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
7. Enhanced power conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
8. Altering the thermodynamics of phase separation in inverted bulk hetero-junction organic solar cells10.1002/adma.200803810 ↗
9. Optimization of inverted tandem organic solar cells10.1016/j.solmat.2010.11.023 ↗
10. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
11. Monodisperse oligo(phenylene vinylene) ligands on CdSe quantum dots: synthesis and polarization anisotropy measurements10.1021/ja077409+ ↗
12. High efficiency flexible polymer solar cells based on PET substrates with a nonannealing active layer10.1149/1.3184341 ↗
13. Self assembly of semiconductor organogelator nanowires for photoinduced charge separation10.1021/nn9001165 ↗
14. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
15. Efficient electron injection mechanism in organic light-emitting diodes using an ultra thin layer of low-work-function metals10.1143/JJAP.42.L1535 ↗
16. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
17. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
18. A semi-transparent plastic solar cell fabricated by a lamination process10.1002/adma.200701101 ↗
19. Fabrication, optical modeling, and color characterization of semitransparent bulk-heterojunction organic solar cells in an inverted structure10.1002/adfm.201000176 ↗
20. Solution-processed zinc oxide thin film as a buffer layer for polymer solar cells with an inverted device structure10.1021/jp1003984 ↗
21. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
22. High-efficiency inverted dithienogermole–thienopyrrolodione based polymer solar cells10.1038/nphoton.2011.317 ↗
23. Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes10.1063/1.3522893 ↗
24. Combination of titanium oxide and a conjugated polyelectrolyte for high-performance inverted-type organic optoelectronic devices10.1002/adma.201100266 ↗
25. High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO10.1016/j.solmat.2011.09.030 ↗
26. Combination of indene-C60 bis-adduct and cross-linked fullerene interlayer leading to highly efficient inverted polymer solar cells10.1021/ja108259n ↗
27. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
28. Efficient hybrid organic-inorganic light emitting diodes with self-assembled dipole molecule deposited metal oxides10.1063/1.3453759 ↗
29. Stability of the inter- face between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
30. Three-dimensional inhomogeneities in PEDOT:PSS films10.1021/jp0464674 ↗
31. Semiconductive polymer blends: correlating structure with transport properties at the nanoscale10.1002/adma.200305747 ↗
32. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
33. Solution deposited NiO thin-films as hole transport layers in organic photovoltaics10.1016/j.orgel.2010.05.008 ↗
34. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
35. Sol–gel preparation of transparent zinc oxide films with highly preferential crystal orientation10.1016/j.vacuum.2004.08.003 ↗
36. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
37. P-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
38. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
39. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
40. Layer-by-layer assembled microgel films with high loading capacity: reversible loading and release of dyes and nanoparticles10.1021/la7031048 ↗
41. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗