Donor–acceptor copolymers incorporating polybenzo[1,2-b:4,5-b′]dithiophene and tetrazine for high open circuit voltage polymer solar cells
Source abstract
Abstract
Abstract Two new low band gap conjugated polymers containing a benzo[1,2-b:4,5-b′]dithiophene donor unit and a tetrazine acceptor unit were synthesized by Stille cross-coupling polymerization. The structural and thermal properties of copolymers were characterized using nuclear magnetic resonance, gel permeation chromatography and thermogravimetric analysis. The results show that the donor–acceptor copolymers thus developed have good thermal stability with decomposition temperature of 294 °C and 305 °C. Cyclic voltammetric study revealed that the copolymers possess a deep-lying highest occupied molecular orbital energy level, which is desired for high open circuit voltage polymer solar cells (PSCs) and is also favorable for stable device operation in air. Bulk-heterojunction PSCs based on blend of low band gap copolymers: [6,6]-phenyl-C71-butyric acid methyl ester on indium tin oxide/glass substrates were fabricated. This work yielded a promising power conversion efficiency of >5.0%, with a high open circuit voltage of ∼1.0 V, measured under air mass 1.5 global irradiation of 100 mW/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Synthesis, characterization, and transistor and solar cell applications of a naphthobisthiadiazole-based semiconducting polymer10.1021/ja210687r ↗
2. Recent progress and future aspects of organic solar cells10.1002/pip.1141 ↗
3. Small molecules based on benzo[1,2-b:4,5-b′]dithiophene unit for high-performance solution-processed organic solar cells10.1021/ja306865z ↗
4. Spirobifluorene-based conjugated polymers for polymer solar cells with high open-circuit voltage10.1021/ma202752h ↗
5. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
6. Energy level and molecular structure engineering of conjugated donor−acceptor copolymers for photovoltaic applications10.1021/ma900623p ↗
7. A fullerene dyad with a tri(octyloxy)benzene moiety induced efficient nanoscale active layer for the poly(3-hexylthiophene)-based bulk heterojunction solar cell applications10.1039/c3cc41321g ↗
8. New amorphous small molecules-synthesis, characterization and their application in bulk heterojunction solar cells10.1016/j.solmat.2011.03.040 ↗
9. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
10. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and Indene-c60 bisadduct by device optimization10.1002/adma.201001339 ↗
11. Indene-C-60 bisadduct: a new acceptor for high-performance polymer solar cells (vol. 132, pg 1377)10.1021/ja101780s ↗
12. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
13. Synthesis and photovoltaic properties of copolymers based on benzo[1,2-b:4,5-b′]dithiophene and thiophene with different conjugated side groups10.1021/ma202399n ↗
14. Synthesis and photovoltaic properties of low band gap polymers containing benzo[1,2-b:4,5-c′]dithiophene-4,8-dione10.1021/ma202578y ↗
15. Benzo[1,2-b:4,5-b′]dithiophene building block for the synthesis of semiconducting polymers10.1002/marc.201100671 ↗
16. Conjugated moiety effect on blend film phase separation and photovoltaic properties of benzo[1,2-b:4,5-b′] dithiophene-containing coplanar donor–acceptor copolymers10.1016/j.solmat.2012.09.023 ↗
17. Development of a new s-tetrazine-based copolymer for efficient solar cells10.1021/ja106052e ↗
18. Solution-processable tetrazine and oligothiophene based linear A–D–A small molecules: synthesis, hierarchical structure and photovoltaic properties10.1016/j.orgel.2013.02.038 ↗
19. Hybrid solar cells from regioregular polythiophene and ZnO nanoparticles10.1002/adfm.200500573 ↗
20. Self-assembly of ZnO: from nanodots to nanorods10.1002/1521-3773(20020402)41:7<1188::AID-ANIE1188>3.0.CO;2-5 ↗
21. A benzo 1,2-b:4,5-b′ dithiophene-based copolymer with deep HOMO level for efficient polymer solar cells10.1016/j.solmat.2012.01.025 ↗
22. Synthesis and photovoltaic properties of solution processable small molecules containing 2-pyran-4-ylidenemalononitrile and oligothiophene moieties10.1021/jp1042848 ↗
23. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
24. Donor-pi-acceptor conjugated copolymers for photovoltaic applications: tuning the open-circuit voltage by adjusting the donor/acceptor ratio10.1021/jp7105428 ↗
25. Efficient two layer leds on a polymer blend basis10.1002/adma.19950070608 ↗
26. Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application10.1021/ja061664x ↗