journal article·2015-09

Origin of high fill factor in polymer solar cells from semiconducting polymer with moderate charge carrier mobility

Jun Yan, Guoping Luo, Biao Xiao, Hongbin Wu, Zhicai He, Yong Cao

Publisher page

Abstract

Abstract The fill factor of polymer bulk heterojunction solar cells (PSCs), which is mainly governed by the processes of charge carrier generation, recombination, transport and extraction, and the competition between them in the device, is one of the most important parameters that determine the power conversion efficiency of the device. We show that the fill factor of PSCs based on thieno[3,4-b]-thiophene/benzodithiophene (PTB7):[6,6]-phenyl C 71 -butyric acid methylester (PC 71 BM) blend that only have moderate carrier mobilities for hole and electron transport, can be enhanced to 76% by reducing the thickness of the photoactive layer. A drift–diffusion simulation study showed that reduced charge recombination loss is mainly responsible for the improvement of FF, as a result of manipulating spatial distribution of charge carrier in the photoactive layer. Furthermore, the reduction of the active layer thickness also leads to enhanced built-in electric field across the active layer, therefore can facilitate efficient charge carrier transport and extraction. Finally, the dependence of FF on charge carrier mobility and transport balance is also investigated theoretically, revealing that an ultrahigh FF of 80–82% is feasible if the charge mobility is high enough (∼10 −3 –10 −1 cm 2 /V s).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions10.1126/science.270.5243.1789 ↗
2. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
3. For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%10.1002/adma.200903528 ↗
4. Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells10.1002/adma.201103006 ↗
5. Over 10% efficiencies achieved for the PSCs with thick active layer based on D-A copolymer donors and various fullerene acceptors10.1007/s11426-014-5313-6 ↗
6. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
9. Communication Previous Article Next Article Table of Contents Efficient Tandem and Triple-Junction Polymer Solar Cells10.1021/ja401434x ↗
10. Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency10.1002/adma.201404535 ↗
11. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
12. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
13. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
14. Device model for the operation of polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.085205 ↗
15. Device Physics of Polymer: Fullerene Bulk Heterojunction Solar Cells10.1002/adma.200601093 ↗
16. Charge injection and transport studies of poly(2,7-carbazole) copolymer PCDTBT and their relationship to solar cell performance10.1016/j.orgel.2012.01.030 ↗
17. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
18. Mobility and fill factor correlation in geminate recombination limited solar cells10.1063/1.3609079 ↗
19. Charge carrier mobility, bimolecular recombination and trapping in polycarbazole copolymer:fullerene (PCDTBT:PCBM) bulk heterojunction solar cells10.1016/j.orgel.2012.07.037 ↗
20. Thickness scaling of the space-charge-limited current in poly(p-phenylene vinylene)10.1063/1.1868865 ↗
21. Thickness dependence of the efficiency of polymer:fullerene bulk heterojunction solar cells10.1063/1.2211189 ↗
22. Optimum charge carrier mobility in organic solar cells10.1063/1.2711534 ↗
23. Influence of charge carrier mobility on the performance of organic solar cells10.1002/pssr.200802110 ↗
24. Mobility dependent efficiencies of organic bulk heterojunction solar cells: Surface recombination and charge transfer state distribution10.1103/PhysRevB.80.035334 ↗
25. The effect of carrier mobility in organic solar cells10.1063/1.3327210 ↗
26. Role of balanced charge carrier transport in low band gap polymer: Fullerene bulk heterojunction solar cells10.1002/polb.22243 ↗
27. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
28. Hole mobility in optimized organic photovoltaic blend films obtained using extraction current transients10.1016/j.orgel.2009.08.003 ↗
29. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
30. Efficient solar cells based on an easily accessible diketopyrrolopyrrole polymer10.1002/adma.201001449 ↗
31. Low Band-Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Effi cient Thick-Film Polymer Solar Cells10.1002/adma.201305092 ↗
32. Enhancing the photocurrent in diketopyrrolopyrrole-based polymer solar cells via energy level control10.1021/ja305358z ↗
33. Thieno[3,2-b]thiophene-Diketopyrrolopyrrole-Containing Polymers for High-Performance Organic Field-Effect Transistors and Organic Photovoltaic Devices10.1021/ja110619k ↗
34. A pyridine-flanked diketopyrrolopyrrole (DPP)-based donor–acceptor polymer showing high mobility in ambipolar and n-channel organic thin film transistors10.1039/C4PY01193G ↗
35. A high mobility DPP-based polymer obtained via direct (hetero)arylation polymerization10.1039/C4PY01222D ↗
36. ε-Branched Flexible Side Chain Substituted Diketopyrrolopyrrole-Containing Polymers Designed for High Hole and Electron Mobilities10.1002/adfm.201403020 ↗
37. 25th Anniversary Article: High-Mobility Hole and Electron Transport Conjugated Polymers: How Structure Defines Function10.1002/adma.201305809 ↗
38. Novel electroluminescent conjugated polyelectrolytes based on polyfluorene10.1021/cm034650o ↗
39. Communication efficient electron injection from a bilayer cathode consisting of aluminum and alcohol-/water-soluble conjugated polymers10.1002/adma.200400067 ↗
40. High-efficiency electron injection cathode of Au for polymer light-emitting devices10.1016/j.orgel.2005.03.009 ↗
41. Initial recombination of ions10.1103/PhysRev.54.554 ↗
42. Electric field assisted dissociation of charge transfer states as a mechanism of photocarrier production10.1063/1.447243 ↗
43. Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells10.1063/1.2170424 ↗
44. Analysis of photogeneration in a doped polymer system in terms of a kinetic model for electric-field-assisted dissociation of charge-transfer states10.1063/1.447244 ↗
45. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
46. Selberherr · 1984