journal article·2014-01Open access

Effect of PEDOT–PSS resistivity and work function on PLED performance

Javan H. Cook, Hameed A. Al-Attar, Andy P. Monkman

Organic Electronics· Volume 15· Issue 1

Abstract

Abstract The effect of a commonly used hole injection layer, poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT–PSS), on polymer light-emitting diode (PLED) performance has been investigated. A series of four different types of commercial PEDOT–PSS, with varying resistivity and work function were examined in devices with the structure Indium Tin Oxide (ITO)/PEDOT–PSS/High Molecular Weight Poly(n-vinylcarbazole) (PVKH): 30% N,N′-bis(3-methylphenyl)-N,N′-diphenylbenzidine (TPD)/Low molecular Weight Poly(n-vinylcarbazole) (PVKL): 40% 2-(4-Biphenyl)-5-(4-tert-butylphenyl)-1,2,4-oxadiazole (PBD): 8% Ir(ppy)3. It was found that the PEDOT–PSS with the highest work function and resistivity produced the devices with the highest efficiencies; this is due to the improved hole injection effect, the decrease in electron leakage current and the prevention of pixel crosstalk. A maximum device current efficiency of 33.4 cd A−1 has been achieved for the most resistive PEDOT; this corresponded to an external quantum efficiency (E.Q.E.) of 11%. Increasing the work function of the PEDOT used resulted in a 60% increase in E.Q.E. and device efficiency for PEDOTs in the same resistivity range. Drift–diffusion simulations, carried out using SEmiconducting Thin Film Optics Simulation software (SETFOS) 3.2, produced J–V curves in good agreement with the experimentally observed results; this allowed us to extract qualitative values for the effective device mobility along with the PEDOT work function and resistivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Fine chemicals strive to expand10.1021/cen-v078n026.p022 ↗
2. Better displays with organic films10.1038/scientificamerican0204-76 ↗
4. Organic light-emitting diode with polyaniline-poly(styrenesulfonate) as a hole injection layer10.1016/j.tsf.2007.08.088 ↗
5. Hole-injection properties of annealed polythiophene films to replace PEDOT–PSS in multilayered OLED systems10.1016/j.synthmet.2008.09.002 ↗
6. Soluble polypyrrole as the transparent anode in polymer light-emitting diodes10.1016/S0379-6779(96)03794-0 ↗
7. Optimization of organic semiconductor devices by anode modification10.1117/12.451856 ↗
8. A comparative study of electrode effects on the electrical and luminescent characteristics of Alq(3)/TPD OLED: Improvements due to conductive polymer (PEDOT) anode10.1016/j.jlumin.2006.07.005 ↗
9. M. Petrosino, P. Vacca, R. Miscioscia, G. Nenna, C. Minarini, A. Rubino, Effect of PEDOT: PSS ratio on the electrical and optical properties of OLEDs - art. No. 659310, In: P Soc Photo-Opt Ins 6593 (2007) 59310–59310.
10. Y.K. Kim, E.Y. Choi, J.H. Seo, H.M. Kim, J.H. Kim, J.T. Je, Improved Efficiency and Adhesion Property between the PEDOT, In: PSS and ITO in Solution-Processed Organic Light-Emitting Diodes, Inec: 2010 3rd International Nanoelectronics Conference, Vols 1 and 2 (2010) 921–922.
11. Efficiency improvement of fluorescent OLEDs by tuning the working function of PEDOT:PSS using UV–ozone exposure10.1016/j.orgel.2010.02.014 ↗
12. Molecular organic light-emitting diodes using highly conducting polymers as anodes10.1063/1.1480100 ↗
13. Clevios™, , (accessed 01/08/11).
14. Solution processed multilayer polymer light-emitting diodes based on different molecular weight host10.1063/1.3569831 ↗
15. SETFOS version 3.2, Fluxim, A. G. Dorfstrasse7, CH-8835 Feusisberg, Switzerland, 2011.
16. Trap-controlled hopping transport10.1021/j150664a054 ↗
17. Carrier mobility of organic thin films using lateral electrode structure with optical slits10.1063/1.2352731 ↗