journal article·2013-07Open access

Blocking layer optimisation of poly(3-hexylthiopene) based Solid State Dye Sensitized Solar Cells

F. Matteocci, G. Mincuzzi, F. Giordano, A. Capasso, E. Artuso, C. Barolo, G. Viscardi, T.M. Brown, A. Reale, A. Di Carlo

Organic Electronics· Volume 14· Issue 7

Abstract

Abstract The optimisation study of the fabrication of a compact TiO2 blocking layer (via Spray Pyrolysis Deposition) for poly(3-hexylthiopene) (P3HT) for Solid State Dye Sensitized Solar Cells (SDSCs) is reported. We used a novel spray TiO2 precursor solution composition obtained by adding acetylacetone to a conventional formulation (Diisopropoxytitanium bis(acetylacetonate) in ethanol). By Scanning Electron Microscopy a TiO2 layer with compact morphology and thickness of around 100 nm is shown. Through a Tafel plot analysis an enhancement of the device diode-like behaviour induced by the acetylacetone blocking layer respect to the conventional one is observed. Significantly, the device fabricated with the acetylacetone blocking layer shows an overall increment of the cell performance with respect to the cell with the conventional one (ΔJsc/Jsc = +13.8%, ΔFF/FF = +39.7%, ΔPCE/PCE = +55.6%). A conversion efficiency optimum is found for 15 successive spray cycles where the diode-like behaviour of the acetylacetone blocking layer is more effective. Over three batches of cells (fabricated with P3HT and dye D35) an average conversion efficiency value of 3.9% (under a class A sun simulator with 1 sun A.M. 1.5 illumination conditions) was measured. From the best cell we fabricated a conversion efficiency value of 4.5% was extracted. This represents a significant increment with respect to previously reported values for P3HT/dye D35 based SDSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. The renaissance of dye solar cells10.1038/nphoton.2012.22 ↗
3. Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12% efficiency10.1126/science.1209688 ↗
4. Laser processing of TiO2 film for dye solar cells: a thermal, sintering, throughput and embodied energy investigation
5. Series-connection designs for dye solar cell modules10.1109/TED.2011.2158216 ↗
6. Design of DSC panel with efficiency more than 6%10.1016/j.solmat.2004.10.001 ↗
7. Efficient dye-sensitized solar cell sub-modules10.1016/j.cap.2009.11.004 ↗
8. Review of stability for advanced dye solar cells10.1039/b922801b ↗
9. Physical and electrochemical analysis of an indoor–outdoor ageing test of large-area dye solar cell devices10.1002/cphc.201200110 ↗
10. Reverse bias degradation in dye solar cells10.1063/1.4754116 ↗
11. Substituted polypyridine complexes of cobalt (II/III) as efficient electron transfer mediators in dye-sensitized solar cells10.1021/ja027355y ↗
12. The 2,2,6,6-tetramethyl-1-piperidinyloxy radical: an efficient, iodine-free redox mediator for dye-sensitized solar cells10.1002/adfm.200701041 ↗
13. A solvent-free, SeCN−/(SeCN)3- based ionic liquid electrolyte for high efficiency dye-sensitized nanocrystalline solar cells10.1021/ja048472r ↗
14. A stable quasi-solid-state dye-sensitized solar cell with an amphiphilic ruthenium sensitizer and polymer gel electrolyte10.1038/nmat904 ↗
15. Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies10.1038/26936 ↗
16. Efficiency enhancements in solid-state hybrid solar cells via reduced charge recombination and increased light capture10.1021/nl071656u ↗
17. Advances in liquid-electrolyte and solid-state dye-sensitized solar cells
18. Tris(2-(1H-pyrazol-1-yl)pyridine)cobalt(III) as p-type dopant for organic semiconductors and its application in highly efficient solid-state dye-sensitized solar cells10.1021/ja207367t ↗
19. The effect of hole transport material pore filling on photovoltaic performance in solid-state dye-sensitized solar cells10.1002/aenm.201100046 ↗
20. Pore filling of spiro-OMeTAD in solid-state dye-sensitized solar cells determined via optical reflectometry
21. An organic D–π–A dye for record efficiency solid-state sensitized heterojunction solar cells10.1021/nl104034e ↗
22. Organic dye for highly efficient solid-state dye-sensitized solar cells10.1002/adma.200401410 ↗
23. Charge generation and photovoltaic operation of solid-state dye-sensitized solar cells incorporating a high extinction coefficient indolene-based sensitizer10.1002/adfm.200801751 ↗
24. All-solid-state dye-sensitized solar cells with high efficiency10.1038/nature11067 ↗
25. Highly efficient nanoporous TiO2-polythiophene hybrid solar cells based on interfacial modification using a metal-free organic dye10.1002/adma.200802388 ↗
26. High-performance solid-state organic dye sensitized solar cells with p3ht as hole transporter10.1021/jp1118597 ↗
27. Facile infiltration of semiconducting polymer into mesoporous electrodes for hybrid solar cells10.1039/c1ee01135a ↗
28. Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells10.1039/C1CP23031J ↗
29. High-performance nanostructured inorganic-organic heterojunction solar cells10.1021/nl101322h ↗
30. Highly efficient semiconducting TiO2 photoelectrodes prepared by aerosol pyrolysis10.1016/0013-4686(95)90400-W ↗
31. Systematic investigation of the role of compact TiO2 layer in solid state dye-sensitized TiO2 solar cells10.1016/j.ccr.2004.02.008 ↗
32. The role of a “Schottky Barrier” at an electron-collection electrode in solid-state dye-sensitized solar cells10.1002/adma.200502256 ↗
33. Dye solar cell on ITO–PET substrate with TiO2 recombination blocking layers10.1149/1.3138129 ↗
34. Improvement of dye-sensitized solar cell performance through electrodepositing a close-packed TiO2 film10.1007/s10008-009-0866-6 ↗
35. TiO2 sol–gel blocking layers for dye-sensitized solar cells10.1016/j.crci.2005.02.052 ↗
36. Characterisation of titanium dioxide blocking layers in dye-sensitized nanocrystalline solar cells10.1021/jp030790+ ↗
37. How important is the back reaction of electrons via the substrate in dye-sensitized nanocrystalline solar cells?10.1021/jp0405759 ↗
38. Chelation and solvent effect on the preparation of titania colloids10.1016/j.matchemphys.2006.02.007 ↗
39. Effect of acetyl acetone on property of TiO2 thin film for photocatalytic reduction of chromium(VI) from aqueous solution
40. Acetylacetonate anchors for robust functionalization of TiO2 nanoparticles with Mn(II)-terpyridine complexes10.1021/ja805498w ↗
41. Symmetric and unsymmetric donor functionalization. comparing structural and spectral benefits of chromophores for dye-sensitized solar cells10.1039/b911397p ↗
42. How should you measure your excitonic solar cells?10.1039/c2ee03429h ↗
43. Study of anatase to rutile phase transition in nanocrystalline titania films10.1023/A:1015357313003 ↗
44. Raman spectroscopy of titania (TiO2) nanotubular water-splitting catalysts10.54119/jaas.2011.6504 ↗
45. Preparation of (Pb, Ba)TiO3 powders and highly oriented thin films by a sol–gel process10.1557/JMR.2004.0199 ↗
46. Efficient infiltration of low molecular weight polymer in nanoporous TiO210.1016/j.cplett.2010.12.062 ↗
47. Influence of electrolyte in transport and recombination in dye-sensitized solar cells studied by impedance spectroscopy10.1016/j.solmat.2004.07.017 ↗