Tuning band gap, color switching, optical contrast, and redox stability in solution-processable BDT-based electrochromic materials
Source abstract
Abstract
Abstract 2,6-bis(trimethylstannane)-4,8-bis(2-octyldecyloxy)benzo[1,2-b:4,5-b′]dithiophene coupled with 2,5-didecyloxy-1,4-dibromobenzene and 4,7-dibromo-5,6-dioctyloxy-2,1,3-benzothiadiazole using Stille-coupling polymerization to afford the non D-A type polymer P1 and D-A type polymer P2, respectively. Two polymers displayed excellent solubility in normal organic solvents, so series of chemical instrumental analysis, such as NMR, GPC and elemental analysis, were carried out to confirm the inner structure and composition of the polymers. Different structure types exerted great influence on polymer's optical, electrochemical and electrochromic properties. Compared with P1 film, the introduction of the strong electron-withdrawing group benzothiadiazole improved conjugate effect along the polymer backbone of P2, which caused the redshift of ultraviolet–visible absorption spectrum and significant reduction in energy band gap. In addition, electrochromic performance test results showed that the P1 polymer film can switch between the orange-yellow and gray, while P2 film changed from blue in the neutral state to light yellow in the oxidation state. Moreover, the optical contrasts and response times of the polymer films also showed great differences due to the different molecular structure types. Higher transmittance changes and less sensitivity to the step interval on optical contrast indicated the fast switching speed and the superior cycle stability of P2 film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Organic polymeric electrochromic devices: polychromism with very high coloration efficiency10.1021/cm0301773 ↗
2. A blue to highly transmissive soluble electrochromic polymer based on poly(3,4-propylenedioxyselenophene) with a high stability and coloration efficiency10.1039/c0jm04285d ↗
3. Electrochemical and optical studies of furan and thieno[3,2-b]thiophene end capped benzotriazole derivatives10.1002/pola.24375 ↗
4. A novel electrophotographic system10.1364/AO.8.S1.000192 ↗
5. Organic electrochromic materials10.1016/S0013-4686(99)00046-8 ↗
6. Multicolored electrochromism in polymers: structures and devices10.1021/cm049669l ↗
7. Hybrid π-conjugated polymers from dibenzo pentacyclic centers: precursor design, electrosynthesis and electrochromics10.1007/s11426-016-0298-2 ↗
8. Highly stable hybrid selenophene-3,4-ethylenedioxythiophene as electrically conducting and electrochromic polymers10.1039/C4PY00529E ↗
9. Chalcogenodiazolo[3,4-c]pyridine based donor-acceptor-donor polymers for green and near-infrared electrochromics10.1039/C5PY01321F ↗
10. Molecular design of DBT/DBF hybrid thiophenes π-conjugated systems and comparative study of their electropolymerization and optoelectronic properties: from comonomers to electrochromic polymers10.1039/C5PY00410A ↗
11. Thiadiazolo[3,4-c]pyridine as an acceptor toward fast-switching green donor–acceptor-type electrochromic polymer with low bandgap10.1021/acsami.5b01188 ↗
12. Manufacture and demonstration of organic photovoltaic-powered electrochromic displays using roll coating methods and printable electrolytes10.1002/polb.23038 ↗
13. Soluble narrow band Gap and blue propylenedioxythiophene-cyanovinylene polymers as multifunctional materials for photovoltaic and electrochromic applications10.1021/ja061274a ↗
14. Spectral engineering in π-conjugated polymers with intramolecular donor-acceptor interactions10.1021/ar100043u ↗
15. A spectroelectrochemical study of poly(dithienothiophenes)10.1016/S0022-0728(96)04879-6 ↗
16. Band structures of polyfulvene and related polymers. A model for the effects of benzannelation on the band structures of polythiophene, polypyrrole, and polyfulvene10.1021/ja00219a015 ↗
17. A new class of small band gap organic polymer conductors10.1007/BF00558045 ↗
18. Low-temperature solution-processed, high-mobility polymer semiconductors for thin-film transistors10.1021/ja067879o ↗
19. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
20. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
21. Copolymers of 3,4-ethylenedioxythiophene and of pyridine alternated with fluorene or phenylene units: synthesis, optical properties, and devices10.1021/ma030540r ↗
22. An easy and effective method to modulate molecular energy level of the polymer based on benzodithiophene for the application in polymer solar cells10.1002/adma.201304631 ↗
23. Material strategies for black-to-transmissive window-type polymer electrochromic devices10.1021/am101148s ↗
24. Electrochromic and electrochemical properties of 3-pyridinyl and 1,10-phenanthroline bearing poly(2,5-di(2-thienyl)-1H-pyrrole) derivatives10.1016/j.solmat.2010.03.027 ↗
25. Synthesis and electropolymerization of the phthaocyanines with 4-(2,5-di-2-thiophen-2-yl-pyrrol-1-yl) substituents10.1016/j.jelechem.2009.11.033 ↗
26. Does the donor-acceptor concept work for designing synthetic metals? 2. Theoretical investigation of copolymers of 4-(dicyanomethylene)-4 H-cyclopenta [2,1-b:3,4-b′] dithiophene and 3,4-(ethylenedioxy) thiophene10.1021/jp020142a ↗
27. Electrosyntheses and characterizations of novel electrochromic and fluorescent copolymers based on 2,2′-bithiophene and pyrene10.1016/j.electacta.2010.08.044 ↗
28. Solution-processable multicolored dithienothiophene-basedconjugated polymers for electrochromic applications10.1016/j.eurpolymj.2013.02.026 ↗
29. Donor–π-bridge–acceptor fluorescent polymers based on thiophene and triphenylamine derivatives as solution processable electrochromic materials10.1016/j.orgel.2015.04.014 ↗
30. Toward purple-to-green-to-transmissive-to-black color switching in polymeric electrochrome10.1021/ma501975m ↗
31. Synthesis and electronic properties of semiconducting polymers containing benzodithiophene with alkyl phenylethynyl substituents10.1021/ma101709h ↗
32. Novel copolymers incorporating dithieno[3,2-b:2′,3′-d]thiophene moieties for air-stable and high performance organic field-effect transistors10.1039/b801603h ↗
33. Tuning the painter's palette: subtle steric effects on spectra and colour in conjugated electrochromic polymers10.1039/C4TC02685C ↗
34. 2,1,3-Benzooxadiazole, thiophene and benzodithiophene based random copolymers for organic photovoltaics: thiophene versus thieno[3,2-b]thiophene as π-conjugated linkers10.1039/C6NJ02469F ↗
35. Solution-processable thiophene-based electrochromic polymers bearing trifluoromethyl rather than long side chains10.1016/j.orgel.2016.06.023 ↗