journal article·2017-06

Flexible rewritable organic memory devices using nitrogen-doped CNTs/PEDOT:PSS composites

I. Rosales-Gallegos, J.A. Ávila-Niño, D. Hérnandez-Arriaga, M. Reyes-Reyes, R. López-Sandoval

Publisher page

Abstract

Abstract Nonvolatile rewritable organic memory devices based on poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and nitrogen doped multi-walled carbon nanotube (NCNT) nanocomposites were fabricated on glass and PET substrates. Organic memory devices with bistable resistive switching were obtained using very low NCTN concentration (∼0.002 wt%) in the polymeric matrix. The memory devices exhibited a good ON/OFF ratio of approximately three orders of magnitude, a good retention time of 10 4 s under operating voltages ≤ |4V| and a few hundredths of write-read-erase-read cycles. The bistable resistive switching is mainly attributed to the creation of oxygen vacancies. These defects are introduced into the thin native Al oxide (AlOx) layer on the bottom electrode during the first voltage sweep. The well-dispersed NCNTs immersed in PEDOT:PSS play a key role as conductive channels for the electronic transport, hindering the electron trapping at the AlOx-polymer interface and inducing a soft dielectric breakdown of the AlOx layer. These PEDOT:PSS + NCNTs memory devices are to easy to apply in flexible low-cost technology and provide the possibility of large-scale integration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Conducting polymers and applications · Neuroscience and Neural Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Non-volatile organic memory with sub-millimetre bending radius10.1038/ncomms4583 ↗
2. Stable switching characteristics of organic nonvolatile memory on a bent flexible substrate10.1002/adma.200904441 ↗
3. Flexible organic bistable devices based on graphene embedded in an insulating poly(methyl methacrylate) polymer layer10.1021/nl1006036 ↗
4. Flexible memristive memory array on plastic substrates10.1021/nl203206h ↗
5. Rewritable, moldable and flexible sticker-type organic memory in arbitrary substrates10.1002/adfm.201302246 ↗
6. Flexible memory devices with tunable electrical bistability via controlled energetics in donor-donor and donor-acceptor conjugated polymers10.1039/C4TC00039K ↗
7. Direct observation of carbon filament in water-resistant organic memory10.1021/acsnano.5b02199 ↗
8. Megahertz operation of flexible low-voltage organic thin-film transistors10.1016/j.orgel.2013.03.021 ↗
9. All graphene-based thin film transistors on flexible plastic substrates10.1021/nl300948c ↗
10. Organic light-emitting diodes on shape memory polymer substrates for wereable electronics10.1016/j.orgel.2015.06.029 ↗
11. Workfuntion-tunable, N-doped reduced graphene transparent electrodes for high-performance polymer light-emitting diodes10.1021/nn203176u ↗
12. Tuning the threshold voltage of carbon nanotube transistors by N-type molecular doping for robust and flexible complementary circuits10.1073/pnas.1320045111 ↗
13. Stable organic static random access memory from a roll-to-roll compatible vacuum evaporation10.1016/j.orgel.2016.01.017 ↗
14. Vacuum-thermal-evaporation: the route for roll-to-roll production of large-area organic electronic circuits10.1088/0268-1242/30/5/054002 ↗
15. Review on physically flexible non-volatile memory for internet of everything electronics10.3390/electronics4030424 ↗
16. Highly conductive PEDOT: PSS electrode with optimized solvent and thermal post- treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
17. Nonvolatile memory elements based on organic materials10.1002/adma.200602564 ↗
18. Recent progress in resistive random access memories: materials, switching mechanisms and performance10.1016/j.mser.2014.06.002 ↗
19. Organic resistive nonvolatile memory materials10.1557/mrs.2012.4 ↗
20. Reproducible resistive switching in nonvolatile organic memories10.1063/1.2806275 ↗
21. Nitrogen-doped partially reduced graphene oxide rewritable nonvolatile memory10.1021/nn400588u ↗
22. Graphene oxide thin films for flexible nonvolatile memory applications10.1021/nl101902k ↗
23. Carbon nanostructures in organic WORM memory devices10.1039/C4TC00816B ↗
24. Nonvolatile write-once-read-many-times memory device with functionalized-nanoshells/PEDOT: PSS nanocomposites10.1016/j.mseb.2011.01.006 ↗
25. Bistable electrical switching and nonvolatile memory effect in carbon nanotube-poly(3,4-Ethylenedioxythiophene): poly(styrenesulfonate) composite films10.1039/C5CP02164B ↗
26. Electrical conductance tuning and bistable switching in poly(N-vinylcarbazole)- carbon nanotube composite films10.1021/nn900319q ↗
27. Organic low voltage rewritable memory device based on PEDOT: PSS/f-MWCNTs thin film10.1016/j.orgel.2012.07.034 ↗
28. Flexible multilevel resistive memory with controlled charge trap B- and N- doped carbon nanotubes10.1021/nl204039q ↗
29. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide10.1016/j.carbon.2007.02.034 ↗
30. Nitrogen-doped, boron-doped and undoped multiwalled carbon nanotube/polymer composites in WORM memory devices10.1088/0957-4484/24/12/125203 ↗
31. Efficient encapsulation of gaseous nitrogen inside carbon nanotubes with bamboo-like structure using aerosol thermolysis10.1016/j.cplett.2004.07.125 ↗
32. N-SWCNTs production by aerosol-assisted CVD method10.1016/j.cplett.2012.04.047 ↗
33. Effects of varying the content of alcohol in the reaction mixture on the graphitization of MWCNT and their surface functionalization10.1021/jp210964j ↗
34. Oxygen to carbon atoms ratio effect on the size, morphology and purity of functionalized carbon nanoshells by using mixtures as carbon source10.1016/j.carbon.2014.04.080 ↗
35. Effect of hydroxyl radical on the structure of multi-walled carbon nanotubes10.1016/j.synthmet.2005.07.346 ↗
36. Sidewall functionalization of a single-walled carbon nanotubes with hydroxyl group-terminated moieties10.1021/cm035349a ↗
37. Removal of oxidation debries from multi-walled carbon nanotubes10.1039/B611930A ↗
38. Influence of size and oxidative treatments of multi-walled carbon nanotubes on their electrocatalytic properties10.1016/j.electacta.2011.12.043 ↗
39. XPS and FTIR analysis of nitrogen incorporation in CNx thin films10.1016/S0257-8972(97)00229-6 ↗
40. Influence of negative DC bias voltage on structural transformation of carbon nitride at 600°C10.1063/1.122036 ↗
41. The crystalline properties of carbon nitride nanotubes synthesized by electron cyclotron resonance plasma10.1016/S0040-6090(03)01091-5 ↗
42. Stable dispersions of nitrogen containing multi-walled carbon nanotubes10.1166/mex.2011.1029 ↗
43. Structural study of nitrogen doping effects in bamboo-shaped multiwalled carbon nanotubes10.1063/1.1697624 ↗
44. Structure, composition and chemical reactivity of carbon nanotubes by selective nitrogen doping10.1016/j.carbon.2005.11.027 ↗
45. Structural and morphological control of aligned nitrogen-doped carbon nanotubes10.1016/j.carbon.2009.12.045 ↗
46. Facile synthesis of carbon nanotubes and their use in the fabrication of resistive switching memory device10.1039/c3ra45359f ↗
47. The mechanism of electroforming of metal oxide memristive switches10.1088/0957-4484/20/21/215201 ↗
48. Switching mechanism of metal/oxide/metal nanodevices10.1038/nnano.2008.160 ↗
49. Microscopic origin of bipolar resistive switching of nanoscale titanium oxide thin films10.1063/1.3251784 ↗
50. Subband transport mechanism and switching properties for resistive switching nonvolatile memories with structure of silver/aluminium oxide/p-type silicon10.1063/1.4908540 ↗
51. Conduction band caused by oxygen vacancies in aluminium oxide for resistance random access memory10.1063/1.4745048 ↗
52. Current conduction mechanism of nitrogen-doped AlOx RRAM10.1109/TED.2014.2319074 ↗