journal article·2013-11

High-performance ITO-free spray-processed polymer solar cells with incorporating ink-jet printed grid

Yu-Ching Huang, Fan-Hsuan Hsu, Hou-Chin Cha, Chih-Min Chuang, Cheng-Si Tsao, Charn-Ying Chen

Organic Electronics· Volume 14· Issue 11
Publisher page

Abstract

Abstract Highly efficient ITO-free polymer solar cells (PSCs) based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) have been fabricated by a combination of inkjet-printing and spray processes. A hybrid transparent conducting electrode consisting of printed silver (Ag) grids and highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PH1000) was used as an alternative to indium-tin oxide (ITO). Spray process incorporating with printed Ag grids played a critical role in improving the interfacial contact between Ag grids and photoactive layer, and thus enhanced the performance of ITO-free large-area PSC. The ITO-free PSC (device area = 0.3 cm2) prepared here has a comparable performance of 2.86%. The average PCE of 2.34% was achieved in the ITO-free PSC with a large electrode area (8 cm2) fabricated herein by the combination of inkjet-printed grid and spray processes. This result is much better than ITO-based large-area PSC generally reported.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Visibly transparent polymer solar cells produced by solution processing10.1021/nn3029327 ↗
2. Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells10.1016/j.solmat.2011.07.009 ↗
3. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
4. Deciphering the uncertainties in life cycle energy and environmental analysis of organic photovoltaics10.1039/c2ee22597b ↗
5. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
6. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
7. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/ange.201103313 ↗
8. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C(60) bisadduct by device optimization10.1002/adma.201001339 ↗
9. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
10. High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive10.1039/c2ee21481d ↗
11. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
12. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
13. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
14. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
15. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
16. ITO-free low-cost organic solar cells with highly conductive poly(3,4 ethylenedioxythiophene): p-toluene sulfonate anodes10.1016/j.solmat.2011.09.019 ↗
17. Effects of the optical microcavity on the performance of ITO-free polymer solar cells with WO3/Ag/WO3 transparent electrode10.1016/j.solmat.2012.01.021 ↗
18. Spin- and spray-deposited single-walled carbon-nanotube electrodes for organic solar cells10.1002/adfm.200902369 ↗
19. The application of highly doped single-layer graphene as the top electrodes of semitransparent organic solar cells10.1021/nn204675r ↗
20. Graphene – a promising material for organic photovoltaic cells10.1002/adma.201102735 ↗
21. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
22. Variations of cell performance in ITO-free organic solar cells with increasing cell areas10.1088/0268-1242/26/3/034010 ↗
23. Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films10.1016/S0379-6779(03)00280-7 ↗
24. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
25. Spray-coated organic solar cells with large-area of 12.25cm210.1016/j.solmat.2010.10.033 ↗
26. Current collecting grids for ITO-free solar cells10.1002/aenm.201100552 ↗
27. Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells10.1016/j.solmat.2012.04.039 ↗
28. ITO-free inverted polymer/fullerene solar cells: interface effects and comparison of different semi-transparent front contacts10.1016/j.solmat.2011.09.044 ↗
29. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
30. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
31. Inkjet printing of conjugated polymer precursors on paper substrates for colorimetric sensing and flexible electrothermochromic display10.1002/adma.201103471 ↗
32. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
33. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
34. Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition10.1063/1.2836267 ↗
35. Facile hot solvent vapor annealing for high performance polymer solar cell using spray process10.1016/j.solmat.2013.02.022 ↗
36. Employing an amphiphilic interfacial modifier to enhance the performance of a poly(3-hexyl thiophene)/TiO2 hybrid solar cell10.1039/c0jm03615c ↗
37. Inspection of substrate-heated modified PEDOT:PSS morphology for all spray deposited organic photovoltaics10.1016/j.solmat.2010.03.013 ↗
38. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
39. Delineation of the effects of water and oxygen on the degradation of organic photovoltaic devices10.1016/j.solmat.2012.06.028 ↗
40. Optimal geometric design of monolithic thin-film solar modules: architecture of polymer solar cells10.1016/j.solmat.2011.09.037 ↗
41. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
42. Area-scaling of organic solar cells10.1063/1.3211850 ↗