Freestanding bilayers of drop-cast single-walled carbon nanotubes and electropolymerized poly(3,4-ethylenedioxythiophene) for thermoelectric energy harvesting
Source abstract
Abstract
Abstract Poly(3,4-ethylenedioxythiophene) (PEDOT) and single-walled carbon nanotubes (SWCNTs) are promising thermoelectric materials that exhibit flexibility and high performance. To realize improved structural and thermoelectric properties, we fabricated PEDOT/SWCNT bilayers consisting of drop-cast SWCNTs and electropolymerized PEDOT. We prepared two types of PEDOT layers using electrolyte solvents of water/methanol (Sample A) and acetonitrile (Sample B). Sample B achieved a flexible freestanding state, whereas Sample A was broken with part of the sample remaining on the substrate. Scanning electron microscopy revealed that the PEDOT layer in Sample A filled the gaps between the SWCNT bundles. The PEDOT layer in Sample B consisted of chain-like structures that mostly covered the surface of the SWCNT layer, which were speculated to increase the strength of the freestanding state. The structural properties of the bilayers were examined using Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. Although slight structural differences were observed between Samples A and B, both samples exhibited the characteristics of PEDOT and SWCNTs. Measurement of the thermoelectric properties near 300 K afforded power factors of 12.5 and 13.9 μW/(m·K2) for Samples A and B, respectively. Therefore, we demonstrated the successful fabrication of freestanding PEDOT/SWCNT bilayers (Sample B) with relatively high thermoelectric performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Human body heat for powering wearable devices: from thermal energy to application10.1016/j.enconman.2016.11.005 ↗
2. High-performance flexible thermoelectric power generator using laser multiscanning lift-off process10.1021/acsnano.6b05004 ↗
3. Toward wearable self-charging power systems: the integration of energy-harvesting and storage devices10.1002/smll.201702817 ↗
4. Fabrication and evaluation of a thermoelectric microdevice on a free-standing substrate10.1007/s11664-009-0819-y ↗
5. Multi-layered-stack thermoelectric generators using p-type Sb2Te3 and n-type Bi2Te3 thin films by radio-frequency magnetron sputtering10.1016/j.vacuum.2017.07.030 ↗
6. P-Type Sb2Te3 and n-Type Bi2Te3 films for thermoelectric modules deposited by thermally assisted sputtering method10.7567/JJAP.52.06GL07 ↗
7. Electrical characterization of thermoelectric generators based on p-type Bi0.4Sb1.6Se2.4Te0.6 and n-type Bi2Se0.6Te2.4 bulk thermoelectric materials10.1016/j.matlet.2013.01.108 ↗
8. Combination of electrodeposition and transfer processes for flexible thin-film thermoelectric generators10.3390/coatings8010022 ↗
9. Thermal design of a thermoelectric micro-generator10.1088/1742-6596/660/1/012088 ↗
10. Fabrication and characterization of roll-type thin-film thermoelectric generators10.1088/1742-6596/1052/1/012129 ↗
11. A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges10.1016/j.rser.2017.01.177 ↗
12. Power generation in slope-type thin-film thermoelectric generators by the simple contact of a heat source10.3390/coatings9020063 ↗
13. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
14. Enhancement of the thermoelectric properties of PEDOT:PSS thin films by post-treatment10.1039/c3ta11209h ↗
15. Preparation and characterization of electropolymerized PEDOT thin films with different dopant anions10.7567/JJAP.55.06GK03 ↗
16. Thermoelectric properties of conducting polymers: the case of poly(3-hexylthiophene)10.1103/PhysRevB.82.115454 ↗
17. Synthesis and thermoelectric properties of hydrochloric acid-doped polyaniline10.1016/j.synthmet.2010.03.001 ↗
18. Scherrer · 1995 · 211
19. Conductive polymers as a new type of thermoelectric material10.1002/1521-3900(200208)186:1<81::AID-MASY81>3.0.CO;2-S ↗
20. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
21. Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently10.1002/adma.201305371 ↗
22. Spray-printed CNT/P3HT organic thermoelectric films and power generators10.1039/C5TA06096F ↗
23. Flexible thermoelectric device based on poly(ether-b-amide12) and high-purity carbon nanotubes mixed bilayer heterogeneous films10.1021/acsaem.7b00190 ↗
24. Complete thermoelectric characterization of PEDOT:PSS thin films with a novel ZT test chip platform10.1002/pssa.201700930 ↗
25. Thermoelectric power-generation characteristics of PEDOT:PSS thin-film devices with different thicknesses on polyimide substrates10.1007/s11664-015-3668-x ↗
26. Effects of different electrolytes and film thicknesses on structural and thermoelectric properties of electropolymerized poly(3,4-ethylenedioxythiophene) films10.1039/C9RA02310K ↗
27. Recent progress of organic and hybrid thermoelectric materials10.1016/j.synthmet.2016.12.017 ↗
28. Origin of unusual thermoelectric transport behaviors in carbon nanotube filled polymer composites after solvent/acid treatments10.1016/j.orgel.2017.03.007 ↗
29. An unusual coral-like morphology for composites of poly(3,4-ethylenedioxythiophene)/carbon nanotube and the enhanced thermoelectric performance10.1016/j.compscitech.2017.03.018 ↗
30. Flexible films of poly(3,4-ethylenedioxythiophene)/carbon nanotube thermoelectric composites prepared by dynamic 3-phase interfacial electropolymerization and subsequent physical mixing10.1039/C8TA04838J ↗
31. Interfacial control and carrier tuning of carbon nanotube/polyaniline composites for high thermoelectric performance10.1016/j.carbon.2018.04.083 ↗
32. Improving electrical conductivity in polycarbonate nanocomposites using highly conductive PEDOT/PSS coated MWCNTs10.1021/am4011622 ↗
33. Improving the thermoelectric power factor of CNT/PEDOT:PSS nanocomposite films by ethylene glycol treatment10.1039/C6RA08599G ↗
34. Poly(3,4-ethylenedioxythiophene)/graphene/carbon nanotube ternary composites with improved thermoelectric performance10.1016/j.orgel.2016.08.022 ↗
35. Effect of ultraviolet irradiation on poly (3,4-ethylenedioxythiophene) doped with ClO4 thin films using electropolymerization10.7567/JJAP.56.06GJ03 ↗
36. Thermoelectric behavior of organic thin film nanocomposites10.1002/polb.23186 ↗
37. Thermoelectric composites of poly (3-hexylthiophene) and carbon nanotubes with a large power factor10.1039/c2ee23406h ↗
38. Abnormally enhanced thermoelectric transport properties of SWNT/PANI hybrid films by the strengthened PANI molecular ordering10.1039/C4EE01905A ↗
39. Enhanced thermoelectric properties of electropolymerized poly (3,4-ethylenedioxythiophene) thin films by optimizing electrolyte temperature and thermal annealing temperature10.1016/j.orgel.2018.01.028 ↗
40. Systematic conversion of single walled carbon nanotubes into n-type thermoelectric materials by molecular dopants10.1038/srep03344 ↗
41. Electropolymerization of pyrrole and electrochemical study of polypyrrole. 3. nature of “water effect” in acetonitrile10.1021/jp990162l ↗
42. Studies of dopant effects in poly(3,4-ethylenedioxythiophene) using Raman spectroscopy10.1002/jrs.1545 ↗
43. Resonant Raman spectroscopy of individual metallic and semiconducting single-wall carbon nanotubes under uniaxial strain10.1103/PhysRevB.72.035425 ↗
44. Evaluation of Young's modulus of carbon nanotubes by micro-Raman spectroscopy10.1557/JMR.1998.0336 ↗
45. Surface characterization of poly(3,4-ethylenedioxythiophene)-coated latexes by X-ray photoelectron spectroscopy10.1021/la991390+ ↗
46. Highly dispersed Pt nanoparticles supported on manganese oxide–poly(3,4-ethylenedioxythiophene)–carbon nanotubes composite for enhanced methanol electrooxidation10.1016/j.jpowsour.2013.03.051 ↗
47. Investigation of the effects of compressive and tensile strain on n-type bismuth telluride and p-type antimony telluride nanocrystalline thin films for use in flexible thermoelectric generators10.1016/j.jallcom.2015.09.039 ↗
48. Simultaneous enhancement of the electrical conductivity and Seebeck coefficient of PEDOT-block-PEG/SWCNTs nanocomposites10.1007/s11664-014-3486-6 ↗
49. Highly improved thermoelectric performances of PEDOT:PSS/SWCNT composites by solvent treatment10.1016/j.orgel.2017.09.030 ↗