Atomic layer deposition of ZnO electron transporting layers directly onto the active layer of organic solar cells
Source abstract
Abstract
Abstract Interlayers in organic solar cells (OSCs) are used to reduce energy barriers for charge injection/extraction, act as optical spacers, introduce carrier selectivity and increase organic/contact compatibility. To date, the most widely used inorganic interlayers are metal oxides such as TiO2 and ZnO. However, these materials require harsh deposition conditions that could damage the organic active layers, and hence are generally used in inverted devices. Here we show, for the first time, that judicious selection of materials and processing conditions allow the use of an atomic layer deposition (ALD) system to deposit thin conformal ZnO interlayers on bulk heterojunctions (BHJs). ALD-ZnO interlayers were utilized as electron transporting layers (ETLs) in OSCs and compared to similar devices with solution deposited ZnO nanoparticle (np) ETLs. OSCs with ALD-ZnO ETLs exhibited higher photocurrent densities, Jsc, but lower open circuit voltages, Voc. The low Voc is associated with the presence of pinholes and an offset between the ALD-ZnO and PC70BM electron conducting states. This offset results from traps and acceptor sites generated during the low temperature ALD process. To recover the Voc we introduced a fluorinated phosphonic acid (PA) additive to the blend. We suggest that the additive migrates to the film surface, interacts with the ZnO to produce a denser layer and to passivate traps, effectively improving the device shunt resistance and energy level alignment and increasing Voc. Overall, the devices with PA and ALD-ZnO ETLs possess significantly higher power conversion efficiencies (PCEs) than those with np-ZnO ETLs. For example, the champion ALD-ZnO device PCE is 3.5%, while that with np-ZnO is 2.75%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
2. A twisted thieno[3,4-b]thiophene-based electron acceptor featuring a 14-π-Electron indenoindene core for high-performance organic photovoltaics10.1002/adma.201704510 ↗
3. Achieving 12.8% efficiency by simultaneously improving open-circuit voltage and short-circuit current density in tandem organic solar cells10.1002/adma.201606340 ↗
4. Metal oxide semiconducting interfacial layers for photovoltaic and photocatalytic applications10.1007/s40243-015-0054-9 ↗
5. Interface investigation and engineering - achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
6. Roles of interlayers in efficient organic photovoltaic devices10.1002/marc.201000310 ↗
7. Selective interlayers and contacts in organic photovoltaic cells10.1021/jz2002259 ↗
8. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
9. Interface materials for organic solar cells10.1039/b921624c ↗
10. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells10.1039/C4EE03802A ↗
11. Post-fabrication annealing effects on the performance of P3HT:PCBM solar cells with/without ZnO nanoparticles10.1016/j.physb.2011.09.103 ↗
12. ZnO cathode buffer layers for inverted polymer solar cells10.1039/C5EE02510A ↗
13. Atomic layer deposition: an overview10.1021/cr900056b ↗
14. Structural and electrical properties of ZnO thin films deposited by atomic layer deposition at low temperatures10.1149/1.2957915 ↗
15. Electrical and optical properties of ZnO processed by atomic layer deposition in inverted polymer solar cells10.1021/jp106641j ↗
16. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
17. Mechanism of metal oxide deposition from atomic layer deposition inside nonreactive polymer matrices: effects of polymer crystallinity and temperature10.1021/acs.chemmater.6b00159 ↗
18. Stabilizing organic photocathodes by low-temperature atomic layer deposition of TiO210.1039/C7SE00421D ↗
19. Rational design of a neutral pH functional and stable organic photocathode10.1039/C8CC01736K ↗
20. Extremely low temperature growth of ZnO by atomic layer deposition10.1063/1.2836819 ↗
21. Low-temperature atomic layer deposition of ZnO thin films: control of crystallinity and orientation10.1016/j.tsf.2011.02.024 ↗
22. Effects of substrate temperature on the microstructure and photoluminescence properties of ZnO thin films prepared by atomic layer deposition10.1016/j.tsf.2006.09.007 ↗
23. ZnO grown by atomic layer deposition: a material for transparent electronics and organic heterojunctions10.1063/1.3133803 ↗
24. Influence of substrate temperature and Zn-precursors on atomic layer deposition of polycrystalline ZnO films on glass10.1016/j.tsf.2008.11.088 ↗
25. Atomic layer deposition of zinc oxide onto and into P3HT for hybrid photovoltaics10.1039/C4TC01629G ↗
26. Mechanisms and reactions during atomic layer deposition on polymers10.1016/j.ccr.2013.07.001 ↗
27. Vapor phase infiltration (VPI) for transforming polymers into organic-inorganic hybrid materials: a critical review of current progress and future challenges10.1039/C7MH00196G ↗
28. Harnessing ALD to directly map the morphology of organic photovoltaic bulk heterojunctions10.1016/j.solmat.2015.07.004 ↗
29. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
30. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
31. Improving the efficiency of polymer solar cells via a treatment of methanol: water on the active layers10.1039/C6TA04026H ↗
32. Wettability of porous surfaces10.1039/tf9444000546 ↗
33. Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends10.1002/adfm.201102510 ↗
34. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
35. Investigating the influence of interfacial contact properties on open circuit voltages in organic photovoltaic performance: work function versus selectivity10.1002/aenm.201200669 ↗
36. Effects of thickness and deposition temperature of ALD ZnO on the performance of inverted polymer solar cells10.1007/s10854-016-5105-1 ↗
37. Electrical behavior of zinc oxide layers grown by low temperature atomic layer deposition10.1063/1.2830940 ↗
38. Energy-level engineering at ZnO/oligophenylene interfaces with phosphonate-based self-assembled monolayers10.1021/acsami.5b01669 ↗
39. Chemically controlled reversible and irreversible extraction barriers via stable interface modification of zinc oxide electron collection layer in polycarbazole-based organic solar cells10.1002/adfm.201400158 ↗
40. Tuning the work function of polar zinc oxide surfaces using modified phosphonic acid self-assembled monolayers10.1002/adfm.201401493 ↗
41. Surface structure modification of ZnO and the impact on electronic properties10.1002/adma.201503404 ↗
42. Efficient modification of metal oxide surfaces with phosphonic acids by spray coating10.1021/la303354t ↗
43. Effects of contact-induced doping on the behaviors of organic photovoltaic devices10.1021/acs.nanolett.5b03473 ↗