journal article·2015-06

Fluorene-centered perylene monoimides as potential non-fullerene acceptor in organic solar cells

Youdi Zhang, Yi Xiao, Yuanpeng Xie, Linlin Zhu, Dequan Shi, Chuanhui Cheng

Publisher page

Abstract

Abstract A fluorene-centered perylene monoimide dimer, PMI-F-PMI with a partly non-coplanar configuration has been developed as a potential non-fullerene acceptor for organic solar cells (OSCs). The optimum power conversion efficiency (PCE) of the OSC based on PMI-F-PMI as acceptor and poly (3-hexyl thiophene) (P3HT) as donor is up to 2.30% after annealing at 150 °C. The PCE of 2.30% is the highest value for the OSCs based on P3HT donor and non-fullerene acceptor lies in that PMI-F-PMI’s lowest unoccupied molecular orbital (LUMO) level around −3.50 eV matches well with the donor P3HT to produce higher open-circuit voltage ( V oc ) of 0.98 V. Meanwhile, PMI-F-PMI makes remarkable contribution to devices’ light absorption as the maximum EQE (30%) of the devices is at 512 nm, same to the maximum absorption wavelength of PMI-F-PMI. The other favorable characteristics of PMI-F-PMI in bulk heterojunction (BHJ) active layers is proved through the photo current density measures, the relatively balanced electron–hole transport, and the smooth morphology with root mean square (RMS) value of 1.86 nm. For these advantages, PMI-F-PMI overwhelms its sister PMI-F and parent PMI as an acceptor in BHJ solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Relating recombination, density of states, and device performance in an efficient polymer: fullerene organic solar cell blend10.1002/aenm.201300194 ↗
3. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
4. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
5. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
6. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
7. Low-bandgap donor/acceptor polymer blend solar cells with efficiency exceeding 4%10.1002/aenm.201301006 ↗
8. Decreased recombination through the use of a non-fullerene acceptor in a 6.4% efficient organic planar heterojunction solar cell10.1002/aenm.201301413 ↗
9. Indan-1,3-dione electron-acceptor small molecules for solution-processable solar cells: a structure–property correlation10.1039/c3cc42293c ↗
10. All-polymer solar cells with 3.3% efficiency based on naphthalene diimide-selenophene copolymer acceptor10.1021/ja4085429 ↗
11. Solution-processed organic solar cells with power conversion efficiencies of 2.5% using benzothiadiazole/imide-based acceptors10.1021/cm203111k ↗
12. Perylene diimide dimer-based acceptor material for highly efficient solution-processed non-fullerene organic solar cells with 4.03% efficiency10.1002/adma.201300897 ↗
13. Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells10.1039/C3CC47204C ↗
14. High performance all-polymer solar cell via polymer side-chain engineering10.1002/adma.201306242 ↗
15. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
16. Synthesis and photovoltaic properties of D-A copolymers based on alkyl-substituted indacenodithiophene donor unit10.1021/cm2019586 ↗
17. High efficiency polymer solar cells based on poly (3-hexylthiophene)/indene-C 70 bisadduct with solvent additive10.1039/c2ee21481d ↗
18. A polythiophene derivative with superior properties for practical application in polymer solar cells10.1002/adma.201401494 ↗
19. An easy and effective method to modulate molecular energy level of the polymer based on benzodithiophene for the application in polymer solar cells10.1002/adma.201304631 ↗
20. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
21. Solution processable rhodanine-based small molecule organic photovoltaic cells with a power conversion efficiency of 6.1%10.1002/aenm.201100572 ↗
22. Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells10.1002/adma.201201958 ↗
23. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-T/PC71BM10.1002/adma.201400411 ↗
24. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
25. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
26. Phenyl vs alkyl polythiophene: a solar cell comparison using a vinazene derivative as acceptor10.1021/cm903067a ↗
27. Solution processable low bandgap diketopyrrolopyrrole (DPP) based derivatives: novel acceptors for organic solar cells10.1039/b924404b ↗
28. Nitrile-substituted QA derivatives: new acceptor materials for solution-processable organic bulk heterojunction solar cells10.1002/aenm.201100082 ↗
29. Tetraazabenzodifluoranthene diimides: building blocks for solution-processable n-type organic semiconductors10.1002/anie.201210085 ↗
30. A non-fullerene small molecule as efficient electron acceptor in organic bulk heterojunction solar cells10.1002/adma.201103927 ↗
31. Non-fullerene acceptors containing fluoranthene-fused imides for solution-processed inverted organic solar cells10.1039/c3cc41803k ↗
32. Efficient bulk heterojunction devices based on phenylenevinylene small molecule and perylene–pyrene bisimide10.1039/B918527E ↗
33. Synthesis of a perylene bisimide with acetonaphthopyrazine dicarbonitrile terminal moieties for photovoltaic applications10.1016/j.synthmet.2010.02.003 ↗
34. Nonplanar perylene diimides as potential alternatives to fullerenes in organic solar cells10.1021/jz301047d ↗
35. Performance, morphology and photophysics of high open-circuit voltage, low band gap all-polymer solar cells10.1039/C4EE03059A ↗
36. All-polymer bulk heterojuction solar cells with 4.8% efficiency achieved by solution processing from a co-solvent10.1002/adma.201401490 ↗
37. High-performance all-polymer solar cells based on face-on stacked polymer blends with low interfacial tension10.1021/mz500415a ↗
38. Naphthobisthiazole diimide-based n-type polymer semiconductors: synthesis, π-stacking, field-effect charge transport, and all-polymer solar cells10.1039/C4PY00566J ↗
39. A star-shaped perylene diimide electron acceptor for high-performance organic solar cells10.1002/adma.201400525 ↗
40. Fullerene-free organic solar cells with an efficiency of 3.7% based on a low-cost geometrically planar perylene diimide monomer10.1039/C4TA02851A ↗
41. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
42. Cooperatively tuning phase size and absorption of near IR photons in P3HT: perylene diimide solar cells by bay-modifications on the acceptor10.1021/jp5093674 ↗
43. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
44. Perylene-diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
45. Effects of functional groups at perylene diimide derivatives on organic photovoltaic device application10.1039/B512983D ↗
46. Effect of addition of a diblock copolymer on blend morphology and performance of poly (3-hexylthiophene): perylene diimide solar cells10.1021/cm900911x ↗
47. Steric control of the donor/acceptor interface: implications in organic photovoltaic charge generation10.1021/ja203235z ↗
48. Polythiophene: perylene diimide solar cells–the impact of alkyl-substitution on the photovoltaic performance10.1002/aenm.201000006 ↗
49. Dye-functionalized head-to-tail coupled oligo (3-hexylthiophenes)—perylene–oligothiophene dyads for photovoltaic applications10.1039/B414817G ↗
50. DNA-enforced conformational restriction of an atropisomer10.1021/jp308260a ↗
51. Synthesis of perylene-3,4-mono (dicarboximide)−fullerene C60 dyads as new light-harvesting systems10.1021/jo800804z ↗
52. Water-soluble rylene dyes as high-performance colorants for the staining of cells10.1021/bm049674i ↗
53. Blue emitting 3π–2 spiro terfluorene–indenofluorene isomers: a structure–properties relationship study10.1002/chem.201102212 ↗
54. A strategy for the detection of Diels–Alder reactions using fluorescence quenching of conjugated polymers10.1002/adfm.200600115 ↗
55. Soluble narrow band gap and blue propylenedioxythiophene-cyanovinylene polymers as multifunctional materials for photovoltaic and electrochromic applications10.1021/ja061274a ↗
56. Effect of interface thickness on power conversion efficiency of polymer photovoltaic cells10.3365/eml.2009.03.047 ↗
57. A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18V10.1039/c2cc31511d ↗
58. Self-assembling decacyclene triimides prepared through a regioselective hextuple Friedel-Crafts carbamylation10.1002/anie.201207608 ↗