Ultrasonic spray coating as deposition technique for the light-emitting layer in polymer LEDs
Source abstract
Abstract
In this work the ultrasonic spray coating technique is introduced as an alternative wet solution process for the deposition of the (Super Yellow) light-emitting layer for polymer light-emitting diodes (PLEDs). An investigation on the use of this coating technique in ambient conditions is performed and a comparison with spin coated PLEDs in inert atmosphere is made. Uniform low roughness thin films with a typical thickness of 80 nm are obtained by varying the polymer–solvent mixture and spray coater parameters. PLEDs are produced and reach a luminous power efficacy in the order of 10 lm/W. Through the use of various optical and analytical techniques it is demonstrated that the applied ultrasonic atomization has no noteworthy influence on the original properties of the polymer and on the resulting PLED’s efficacy. Ultrasonic spray coating is therefore a viable deposition technique for the production of PLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. White organic light-emitting devices for solid-state lighting10.1002/adma.200400684 ↗
2. Recent progress of molecular organic electroluminescent materials and devices10.1016/S0927-796X(02)00093-1 ↗
3. Light-emitting diodes based on conjugated polymers10.1038/347539a0 ↗
4. Organic electroluminescent diodes10.1063/1.98799 ↗
5. Efficient solution-processed small-molecule single emitting layer electrophosphorescent white light-emitting diodes10.1016/j.orgel.2010.05.015 ↗
6. Flexible organic electronic devices: materials, process and applications10.1016/j.mseb.2008.06.009 ↗
7. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
8. Novel method for polymer thin film preparation: spray deposition of highly diluted polymer solutions10.1143/JJAP.41.L70 ↗
9. Ultrasonic spray deposition for production of organic solar cells10.1016/j.solmat.2008.10.026 ↗
10. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
11. Effects of fluorine doping on the structural properties of the CdO films deposited by ultrasonic spray pyrolysis10.1016/j.solmat.2007.07.014 ↗
12. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
13. K.X. Steirer, M.O. Reese, B.L. Rupert, N. Kopidakis, D.C. Olson, D.S. Ginley, R.T. Collins, Advancing spray deposition for low-cost solar cell production, SPIE Newsroom, 2009, pp. 1–3.10.1117/2.1200903.1555 ↗
14. High-performance ITO-free spray-processed polymer solar cells with incorporating ink-jet printed grid10.1016/j.orgel.2013.08.001 ↗
15. Spray coated high-conductivity PEDOT:PSS transparent electrodes for stretchable and mechanically-robust organic solar cells10.1016/j.solmat.2012.09.005 ↗
16. Characterization of ZnO films obtained by ultrasonic spray pyrolysis technique10.1016/j.ijhydene.2008.09.108 ↗
17. Nanoparticle-based, spray-coated silver top contacts for efficient polymer solar cells10.1016/j.orgel.2009.03.006 ↗
18. Soluble phenyl-substituted PPVs new materials for highly efficient polymer LEDs10.1002/(SICI)1521-4095(199811)10:16<1340::AID-ADMA1340>3.0.CO;2-G ↗
19. Mechanically-induced chemical changes in polymeric materials10.1021/cr9001353 ↗
20. Singlet and triplet excitations of chiral dialkoxy-p-phenylene vinylene oligomers10.1063/1.481638 ↗
21. Device model for single carrier organic diodes10.1063/1.366522 ↗
22. Device performance and polymer morphology in polymer light emitting diodes: the control of thin film morphology and device quantum efficiency10.1063/1.373062 ↗