journal article·2013-01

Flexible organic light-emitting diodes on a polyestersulfone (PES) substrate using Al-doped ZnO anode grown by dual-plasma-enhanced metalorganic deposition system

Po-Hsun Lei, Chia-Ming Hsu, Yu-Siang Fan

Organic Electronics· Volume 14· Issue 1
Publisher page

Abstract

Abstract This study proposes flexible organic light-emitting diodes (OLEDs) grown on polyestersulfone (PES) using Al-doped zinc oxide (AZO) as the anode, fabricated by the dual-plasma-enhanced chemical vapor deposition (DPEMOCVD) system. The experimental results including crystalline structure, optical, and electrical characteristics indicate that the quality of AZO films grown on PES depends on the deposition temperature and Al content. The optimal deposition temperature and Al content for AZO film are 185 C and 2.88 at%, respectively. Further increasing or decreasing the deposition temperature and Al content degrades the quality of AZO films. The optimal AZO film deposited on the PES substrate was used as the anode for flexible OLED. It shows a similar performance compared to OLEDs using commercial indium–tin-oxide (ITO) as the anode on glass, and represents enhanced characteristics to that of the commercial ITO anode on a flexible polyethylene naphthalate (PEN) substrate. This indicates that the DPEMOCVD-deposited AZO film on the PES substrate can be the anode for flexible OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Anode material based on Zr-doped ZnO thin film for organic light-emitting diodes10.1063/1.1623933 ↗
2. Highly efficient blue organic light-emitting devices with indium-free transparent anode on flexible substrate10.1016/j.orgel.2010.06.018 ↗
3. High-performance GaN-based light-emitting diode using high transparency Ni/Au/Al-doped ZnO composite contacts10.1063/1.2120913 ↗
4. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
5. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
6. Fully flexible solution-deposited ZnO thin film transistors10.1002/adma.201002163 ↗
7. ITO films deposited on wafer-cooled flexible substrate by bias RF magnetron sputtering10.1016/S0169-4332(00)00305-6 ↗
8. Effect of SiO2/Si3N4 Dielectric Distributed Bragg Reflectors (DDBRs) for Alq3/NPB thin-film resonant cavity organic light emitting diodes10.1016/j.optcom.2009.12.042 ↗
9. Present status and future prospects for development of non- or reduced-indium transparent conducting oxide thin films10.1016/j.tsf.2008.09.059 ↗
10. Indium–tin oxide treatments for single- and double-layer polymeric light-emitting diodes: the relation between the anode physical, chemical, and morphological properties and the device performance10.1063/1.368981 ↗
11. Electrode interface effects on indium–tin–oxide polymer/metal light emitting diodes10.1063/1.116934 ↗
12. Low temperature deposited ZnO thin films on the flexible substrate by cathodic vacuum arc technology10.1016/j.apsusc.2011.03.065 ↗
13. High quality ZnO films deposited by radio-frequency magnetron sputtering using layer by layer growth method10.1016/j.tsf.2009.12.023 ↗
14. Organic light emitting diodes using a Ga: ZnO node10.1063/1.2917565 ↗
15. Optical and electronic properties of post-annealing ZnO:Al thin films10.1063/1.3419859 ↗
16. Role of oxygen for highly conducting and transparent gallium-doped zinc oxide electrode deposited at room temperature10.1063/1.3541885 ↗
17. Characteristics of indium zinc oxide films deposited using the facing targets sputtering method for OLEDs applications10.1016/j.tsf.2010.03.169 ↗
18. Preparation of ZnO thin films using MOCVD technique with D2O/H2O gas mixture for use as TCO insilicon-based thin film solar cells10.1016/j.solmat.2010.04.025 ↗
19. X-ray generation using carbon-nanofiber-based flexible field emitters10.1063/1.2182022 ↗
20. Highly flexible and transparent InZnSnOx/Ag/InZnSnOx multilayer electrode for flexible organic light emitting diodes10.1063/1.2937845 ↗
21. Flexible Al-doped ZnO films grown on PET substrate using linear facing target sputtering for flexible OELDs10.1088/0022-3727/43/46/465403 ↗
22. Flexible organic static induction transistors using pentacene thin films10.1063/1.2137900 ↗
23. ITO films deposited on water-cooled flexible substrate by bias RF magnetron sputtering10.1016/S0169-4332(00)00305-6 ↗
24. Effect of substrate treatment on the initial growth mode of indium–tin-oxide films10.1063/1.1835003 ↗
25. Electrical and optucal properties of ZnO:Al film prepared on polyethersulfone substrate by RF magnetron sputtering10.1016/j.colsurfa.2008.11.049 ↗
26. Indium-free transparent organic light emitting diodes with Al doped ZnO electrode grown by atomic layer and pulsed laser deposition10.1063/1.2975176 ↗
27. Structural, electrical, and optical properties of atomic layer deposition Al-doped ZnO films10.1063/1.3466987 ↗
28. Preparation of transparent and conductive Al-doped ZnO thin films by ECR plasma enhanced CVD10.1016/S0257-8972(01)01609-7 ↗
29. In situ spectroscopic ellipsometry growth studies on the Al-doped ZnO films deposited by remote plasma-enhanced metalorganic chemical vapor deposition10.1063/1.2837109 ↗
30. Zinc oxide (ZnO) grown on flexible substrate using dual-plasma-enhanced metalorganic vapor deposition (DPEMOCVD)10.1016/j.surfcoat.2012.01.023 ↗
31. Birkholz · 2006
32. Surface characterization of transparent conductive oxide Al-doped ZnO films10.1016/S0022-0248(00)00834-4 ↗
33. Influence of postdeposition annealing on the structural and optical properties of sputtered zinc oxide film10.1063/1.362842 ↗
34. Carrier concentration dependence of band gap shift in n-type ZnO:Al films10.1063/1.2721374 ↗
35. Band gap and electronic properties of wurtzite-structure ZnO co-doped with IIA and IIIA10.1063/1.3627233 ↗
36. Dependence of resistivity on structure and composition of AZO films fabricated by ion beam co-sputtering deposition10.1016/j.apsusc.2010.11.043 ↗
37. Schroder · 1990
38. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
39. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
40. The interpretation of the properties of indium antimonide10.1088/0370-1301/67/10/306 ↗
41. Band-gap tailoring of ZnO means of heavy Al doping10.1103/PhysRevB.37.10244 ↗
42. Fred Schubert · 2006