Combination of PPy with three-dimensional rGO to construct bioinspired nanocomposite for NH3-sensing enhancement
Source abstract
Abstract
Abstract For general nanoparticle-like gas-sensing materials, high dispersion, low agglomeration, and high active surface available for gas adsorption are highly desirable for achieving high sensing performance. Inspired from the distribution structure of olfactory cells of mice, this work describes a macroporous nanocomposite of polypyrrole/three-dimensional reduced graphene oxide (PPy/3D-rGO) with biomimetic structure for highly sensitive application. The PPy/3D-rGO nanocomposite was prepared via in-situ chemical polymerization of sensitive PPy nanoparticles on the pore wall of rGO with 3D architecture. The 3D-rGO, pre-prepared by a facile hydrothermal reduction method, serves as 3D skeleton to provide solid support for sensitive PPy nanoparticles attachment. The as-formed nanocomposite displays loose 3D morphology and the fine PPy nanoparticles with high dispersion and low agglomeration distribute on the pore walls of 3D-rGO uniformly. The NH3-sensing properties of the PPy/3D-rGO nanocomposite and the single components were evaluated at room temperature. It is found that the bioinspired PPy/3D-rGO nanocomposite displays a 4–5 times enhancement in gas response compared with pure PPy and can rapidly response NH3 with sub-ppm level. It also demonstrates good dynamic characteristic, satisfactory selectivity and stability for PPy/3D-rGO nanocomposite sensor. The enhanced sensing performances of PPy/3D-rGO nanocomposite are analyzed reasonably based on its unique microstructure and the effective nanocompositeization between rGO and PPy nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Enhanced sensitivity of a gas sensor incorporating single‐walled carbon nanotube–polypyrrole nanocomposites10.1002/adma.200306176 ↗
2. Electrical conductivity studies on water-soluble polypyrrole-graphene oxide composites10.1002/pc.21237 ↗
3. Fabrication of polypyrrole/graphene oxide nanocomposites by liquid/liquid interfacial polymerization and evaluation of their optical, electrical and electrochemical properties10.1016/j.polymer.2011.12.054 ↗
4. Ammonia sensing properties of polypyrrole thin films at room temperature10.1016/j.snb.2011.03.009 ↗
5. Highly sensitive, room temperature gas sensor based on polyaniline-multiwalled carbon nanotubes (PANI/MWCNTs) nanocomposite for trace-level ammonia detection10.1016/j.snb.2015.08.002 ↗
6. Graphene/polyaniline nanocomposite for hydrogen sensing10.1021/jp103134u ↗
7. Highly sensitive and flexible ammonia sensor based on S and N co-doped graphene quantum dots/polyaniline hybrid at room temperature10.1016/j.snb.2016.01.086 ↗
8. Room temperature ammonia sensor based on copper nanoparticle intercalated polyaniline nanocomposite thin films10.1016/j.apsusc.2015.02.164 ↗
9. Ammonia gas-sensing based on polythiophene film prepared through electrophoretic deposition method10.1007/s10965-016-0999-0 ↗
10. Polyaniline nanofiber gas sensors: examination of response mechanisms10.1021/nl035122e ↗
11. Spontaneous assembly of strong and conductive graphene/polypyrrole hybrid aerogels for energy storage10.1039/C4NR03322A ↗
12. Chemical sensors based on nanostructured materials10.1016/j.snb.2006.06.022 ↗
13. Significant impact of 2D graphene nanosheets on large volume change tin-based anodes in lithium-ion batteries: a review10.1016/j.jpowsour.2014.10.008 ↗
14. Flexible room temperature ammonia sensor based on polyaniline10.1016/j.snb.2016.08.173 ↗
15. Ammonia sensor based on polypyrrole–graphene nanocomposite decorated with titania nanoparticles10.1016/j.ceramint.2015.01.081 ↗
16. Preparation of camphor-sulfonic acid doped PPy–NiO hybrid nanocomposite for detection of toxic nitrogen dioxide10.1016/j.synthmet.2015.08.018 ↗
17. Room temperature NO2 gas sensing properties of DBSA doped PPy–WO3 hybrid nanocomposite sensor10.1016/j.orgel.2015.01.018 ↗
18. Nanowire-based gas sensors10.1016/j.snb.2012.10.134 ↗
19. Facile preparation of polypyrrole-reduced graphene oxide hybrid for enhancing NH3 sensing at room temperature10.1016/j.snb.2016.10.047 ↗
20. A highly sensitive room-temperature sensing material for NH3: SnO2 -nanorods coupled by rGO10.1016/j.snb.2016.09.096 ↗
21. Design of advanced porous graphene materials: from graphene nanomesh to 3D architectures10.1039/C3NR04555B ↗
22. RGO–MWCNT–ZnO based polypyrrole nanocomposite for ammonia gas sensing10.1007/s10854-018-8810-0 ↗
23. Survey anatomy of the paranasal sinuses in the normal mouse10.1097/01.MLG.0000202085.23454.2F ↗
24. Three-dimensional crumpled graphene-based nanosheets with ultrahigh NO2 gas sensibility10.1021/acsami.7b01229 ↗
25. Anatomy, histochemistry, and immunohistochemistry of the olfactory subsystems in mice10.3389/fnana.2014.00063 ↗
26. Self-assembled graphene hydrogel via a one-step hydrothermal process10.1021/nn101187z ↗
27. Three-dimensionally bonded spongy graphene material with super compressive elasticity and near-zero Poisson's ratio10.1038/ncomms7141 ↗
28. Core-shell structure of polypyrrole grown on W18O49 nanorods for high performance gas sensor operating at room temperature10.1016/j.orgel.2017.06.014 ↗
29. Ultrasensitive silicon nanowire sensor developed by a special Ag modification process for rapid NH3 detection10.1021/acsami.7b10584 ↗
30. In situ self-assembly of mild chemical reduction graphene for three-dimensional architectures10.1039/c1nr10355e ↗
31. Synthesis of hierarchical 3D porous ZnO microspheres decorated by ultra-small Au nanoparticles and its highly enhanced acetylene gas sensing ability10.1016/j.jallcom.2017.10.156 ↗
32. Polypyrrole nanoparticles fabricated via Triton X-100 micelles template approach and their acetone gas sensing property10.1016/j.apsusc.2013.04.132 ↗
33. Sensitive detection of ammonia by reduced graphene oxide/polypyrrole nanocomposites10.1016/j.synthmet.2015.02.026 ↗
34. Material and NH3-sensing properties of polypyrrole-coated tungsten oxide nanofibers10.1016/j.snb.2013.05.039 ↗
35. Inducement of nanoscale Cu–BTC on nanocomposite of PPy–rGO and its performance in ammonia sensing10.1016/j.materresbull.2017.11.012 ↗
36. 3D mesoporous van der Waals heterostructures for trifunctional energy electrocatalysis10.1002/adma.201705110 ↗
37. Three-dimensional chemically reduced graphene oxide templated by silica spheres for ammonia sensing10.1016/j.snb.2017.05.117 ↗
38. Fabrication and NO2 gas sensing performance of TeO2 -core/CuO-shell heterostructure nanorod sensors10.1186/1556-276X-9-638 ↗
39. Metal and metal oxide nanoparticles in chemiresistors: does the nanoscale matter10.1002/smll.200500261 ↗
40. A 3D scaffold for ultra-sensitive reduced graphene oxide gas sensors10.1039/C4NR00332B ↗
41. Fabrication technologies and sensing applications of graphene-based composite films: advances and challenges10.1016/j.bios.2016.01.081 ↗