Inkjet printing of thermally activated delayed fluorescence (TADF) dendrimer for OLEDs applications
Source abstract
Abstract
Abstract This study presents the inkjet printing of a novel OLED device with fully solution-processed organic layers that employ TADF material as an emitting layer. The ink was formulated using new TADF material, triazine core carbazole dendrimers with tert-butyl group at the periphery (tBuG2TAZ), dissolved in a mixture of two non-chlorinated solvents. The influence of the print resolution and the substrate temperature on morphology of the printed films was studied and optimized in ambient conditions. The optimized TADF dendrimer layer was then incorporated in the OLEDs as the emitting layer. The best-printed OLEDs exhibited a maximum current efficiency of 18 cd/A and maximum luminance of 6900 cd/m2. Such values are comparable to the values obtained in spin coated devices made of the same TADF dendrimer. Further, the mobility of charge carriers extracted from transient electroluminescence measurements of printed OLEDs, when compared to reference OLEDs made by spin coating technique, showed similar values. Finally, we have demonstrated the possibility of patterning of emission the area of complex shapes merely by selectively printing the emission layer. These results demonstrate the potential application of the new dendrimer TADF emitters for the fabrication of efficient OLEDs by an inkjet printing technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Maskless RGB color patterning of vacuum-deposited small molecule OLED displays by diffusion of luminescent dopant molecules10.1364/OE.23.016650 ↗
2. High resolution organic light‐emitting diode panel fabricated by ink jet printing process10.1002/sdtp.10123 ↗
3. Sarma · 2015 · 11
4. Electroluminescence in conjugated polymers10.1038/16393 ↗
5. Thermal evaporation versus spin-coating: electrical performance in columnar liquid crystal OLEDs10.1021/acsami.5b03496 ↗
6. Sublimable cationic iridium(III) complexes with 1,10-phenanthroline derivatives as ancillary ligands for highly efficient and polychromic electroluminescence10.1002/chem.201602646 ↗
7. Toward high-performance vacuum-deposited OLEDs: sublimable cationic iridium(III) complexes with yellow and orange electroluminescence10.1002/chem.201705559 ↗
8. Flexible blade-coated multicolor polymer light-emitting diodes for optoelectronic sensors10.1002/adma.201606206 ↗
9. Inkjet printing of functional materials for optical and photonic applications10.3390/ma9110910 ↗
10. Roll‐to‐Roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
11. High yield, single droplet electrode arrays for nanoscale printed electronics10.1021/nn9014664 ↗
12. Scaling and optimization of gravure-printed silver nanoparticle lines for printed electronics10.1109/TCAPT.2009.2021464 ↗
13. Application of screen printing in the fabrication of organic light‐emitting devices10.1002/1521-4095(200009)12:17<1249::AID-ADMA1249>3.0.CO;2-Y ↗
14. Gravure printed flexible small-molecule organic light emitting diodes10.1016/j.orgel.2013.09.027 ↗
15. Inkjet printing—process and its applications10.1002/adma.200901141 ↗
16. Inkjet printing of polymers: state of the art and future developments10.1002/adma.200300385 ↗
17. Inkjet printing technique and its application in organic light emitting diodes
18. Recent advances in organic thermally activated delayed fluorescence materials10.1039/C6CS00368K ↗
19. Organic electroluminescent diodes10.1063/1.98799 ↗
20. H. Jeong, H. Shin, J. Lee, B. Kim, Y.-I. Park, K.S. Yook, B.-K. An, J. Park, Recent Progress in the Use of Fluorescent and Phosphorescent Organic Compounds for Organic Light-Emitting Diode Lighting, SPIE2015, pp. 23.10.1117/1.JPE.5.057608 ↗
21. Highly efficient phosphorescent emission from organic electroluminescent devices10.1038/25954 ↗
22. Thermally activated delayed fluorescence from Sn4+–porphyrin complexes and their application to organic light emitting diodes — a novel mechanism for electroluminescence10.1002/adma.200900983 ↗
23. Rational design of strongly blue-emitting cuprous complexes with thermally activated delayed fluorescence and application in solution-processed OLEDs10.1021/cm4024309 ↗
24. Thermally activated delayed fluorescence conjugated polymers with backbone‐donor/pendant‐acceptor architecture for nondoped OLEDs with high external quantum efficiency and low roll‐off10.1002/adfm.201706916 ↗
25. Highly efficient thermally activated delayed fluorescence from an excited-state intramolecular proton transfer system10.1021/acscentsci.7b00183 ↗
26. Highly efficient organic light-emitting diodes from delayed fluorescence10.1038/nature11687 ↗
27. Boosting reverse intersystem crossing by increasing donors in triarylboron/phenoxazine hybrids: TADF emitters for high-performance solution-processed OLEDs10.1039/C6TC01353H ↗
28. A solution-processable host material of 1,3-bis{3-[3-(9-carbazolyl)phenyl]-9-carbazolyl}benzene and its application in organic light-emitting diodes employing thermally activated delayed fluorescence10.1039/C4TC02211D ↗
29. 20% external quantum efficiency in solution-processed blue thermally activated delayed fluorescent devices10.1002/adfm.201502995 ↗
30. Delayed fluorescence in a solution-processable pure red molecular organic emitter based on dithienylbenzothiadiazole: a joint optical, electroluminescence, and magnetoelectroluminescence study10.1021/am508574m ↗
31. Thermally activated delayed fluorescent polymers10.1002/pola.28448 ↗
32. Inheriting the characteristics of TADF small molecule by side-chain engineering strategy to enable bluish-green polymers with high PLQYs up to 74% and external quantum efficiency over 16% in light-emitting diodes10.1002/adma.201604223 ↗
33. Creating a thermally activated delayed fluorescence channel in a single polymer system to enhance exciton utilization efficiency for bluish-green electroluminescence10.1039/C5CC09797E ↗
34. Thermally activated delayed fluorescence polymers for efficient solution-processed organic light-emitting diodes10.1002/adma.201505026 ↗
35. Highly efficient thermally activated delayed fluorescence organic light-emitting diodes with fully solution-processed organic multilayered architecture: impact of terminal substitution on carbazole–benzophenone dendrimer and interfacial engineering10.1021/acsami.8b09451 ↗
36. A dendrimer emitter doped in a dendrimer host: efficient thermally activated delayed fluorescence OLEDs with fully-solution processed organic-layers10.1039/C7QM00579B ↗
37. Carbazole dendrimers as solution-processable thermally activated delayed-fluorescence materials10.1002/anie.201500203 ↗
38. Efficient, inkjet-printed TADF-OLEDs with an ultra-soluble NHetPHOS complex10.1007/s00339-016-9726-2 ↗
39. Thermally activated delayed fluorescence OLEDs with fully solution processed organic layers exhibiting nearly 10% external quantum efficiency10.1039/C6CC09275F ↗
40. S.D. Hoath, Fundamentals of Inkjet Printing : the Science of Inkjet and Droplets, Germany: Wiley-VCH Verlag GmbH & Co. KGaA2005.
41. Numerical calculation of the fluid dynamics of drop-on-demand jets10.1147/rd.283.0322 ↗
42. Influence of fluid physical properties on ink-jet printability10.1021/la900059m ↗
43. Inkjet-printed graphene electronics10.1021/nn2044609 ↗
44. Control of droplet formation for low viscosity fluid by double waveforms applied to a piezoelectric inkjet nozzle10.1016/j.microrel.2010.11.017 ↗
45. PubChem substance and compound databases10.1093/nar/gkv951 ↗
46. Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation10.1088/0960-1317/19/5/055010 ↗
47. Printed microelectrode arrays on soft materials: from PDMS to hydrogels10.1038/s41528-018-0027-z ↗
48. Toward inkjet printing of small molecule organic light emitting diodes10.1016/j.tsf.2013.01.041 ↗
49. Inkjet printing the three organic functional layers of two-colored organic light emitting diodes10.1016/j.tsf.2015.03.064 ↗
50. All-solution-processed pure formamidinium-based perovskite light-emitting diodes10.1002/adma.201804137 ↗
51. Microwave-assisted one-pot synthesis of new ionic iridium complexes of [Ir(bzq)2(N∧N)]+Aâ∧’ type and their selected electroluminescent properties10.1039/C7DT01372H ↗
52. Excimers and exciplexes in organic electroluminescence
53. Transient behavior of organic thin film electroluminescence10.1063/1.107411 ↗
54. Slot-die coating of double polymer layers for the fabrication of organic light emitting diodes10.3390/mi10010053 ↗
55. Urethane–acrylate polymers in high-resolution contact printing10.1039/C6TC01125J ↗
56. Simple detachment patterning of organic layers and its application to organic light-emitting diodes10.1002/adma.200400223 ↗
57. Emission area patterning of organic light-emitting diodes (OLEDs) via printed dielectrics10.1002/adfm.201802986 ↗
58. Electroluminescence of pure poly(N‐vinylcarbazole) and its blends with a multiblock copolymer10.1063/1.358458 ↗
59. Marek Zdzislaw Szymański · 2019 · 9