journal article·2012-12

Large area ITO-free organic solar cells on steel substrate

Yulia Galagan, Date J.D. Moet, Dorothee C. Hermes, Paul W.M. Blom, Ronn Andriessen

Organic Electronics· Volume 13· Issue 12
Publisher page

Abstract

Abstract Large area ITO-free organic solar cells on steel substrates are demonstrated. The stainless steel was used as a substrate with excellent barrier properties and as a bottom electrode with very low sheet resistance. The low sheet resistance of the steel electrode allows manufacturing of large area devices with good performance. The individual cells with the size of 5 × 10 cm 2 and efficiency of 1.3% were manufactured. The OPV cells with steel electrode demonstrate fill factor in the range of 58–69%, as measured under illumination through a mask with an aperture of 1.0 × 1.0 cm 2 . A thermally evaporated semitransparent top cathode, contained ZnS and thin metal layers, was used to complete the device stack. In order to quantitate effect of the cathode transmittance, the optical simulations using the transfer-matrix formalism has been performed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
2. The OE-A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗
3. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
4. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
5. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
6. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
7. Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water10.1016/j.solmat.2011.08.026 ↗
8. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods10.1016/j.solmat.2011.10.005 ↗
9. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
10. All solution roll-to-roll processed polymer solar cells free from indium–tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
11. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
12. Life-cycle analysis of product integrated polymer solar cells10.1039/c1ee01127h ↗
13. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
14. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
15. Origin of size effect on efficiency of organic photovoltaics10.1063/1.3567930 ↗
16. Flexible substrates as basis for photocatalytic reduction of carbon dioxide10.1016/j.solmat.2011.06.040 ↗
17. Organic photovoltaics: technologies and manufacturing
18. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
19. Thin-film permeation-barrier technology for flexible organic light-emitting devices10.1109/JSTQE.2004.824072 ↗
20. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
21. The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells10.1063/1.2975185 ↗
22. The effect of barrier performance on the lifetime of small-molecule organic solar cells10.1016/j.solmat.2011.09.026 ↗
23. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
24. Top-emitting 230 dots/in. active-matrix polymer light-emitting diode displays on flexible metal foil substrates10.1063/1.2722059 ↗
25. Semitransparent organic solar cells with organic wavelength dependent reflectors10.1063/1.3546171 ↗
26. van Assche · 2008
27. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
28. Combined optical and electrical modeling of polymer: Fullerene bulk heterojunction solar cells10.1063/1.2905243 ↗
29. Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells10.1063/1.1889240 ↗
30. Study of organic photovoltaics by localized concentrated sunlight: towards optimization of charge collection in large-area solar cells10.1063/1.3656276 ↗
31. Photovoltaic characterization of concentrator solar cells by localized irradiation10.1063/1.2266161 ↗
32. Current collecting grids for ITO-free solar cells10.1002/aenm.201100552 ↗