journal article·2014-02

Highly efficient and high transmittance semitransparent polymer solar cells with one-dimensional photonic crystals as distributed Bragg reflectors

Wenjuan Yu, Liang Shen, Yongbing Long, Ping Shen, Wenbin Guo, Weiyou Chen, Shengping Ruan

Organic Electronics· Volume 15· Issue 2
Publisher page

Abstract

Abstract We demonstrate that one-dimensional photonic crystals as distributed Bragg reflectors can effectively improve the performance of semitransparent polymer solar cells (PSCs) based on the blend of P3HT:ICBA. The one dimensional distributed Bragg reflectors (1D DBRs) are composed of N pairs of WO 3 /LiF which are thermally evaporated on Ag anode. Due to its photonic bandgap, 1D DBRs can reflect the light totally back into the PSCs when the high reflectance range of 1D DBRs is well matched with absorption spectrum of the active layer. A maximum power conversion efficiency (PCE) of 4.12%, a highest transmittance of 80.4% at 660 nm and an average transmittance of 55.6% in the wavelength range of 600–800 nm are obtained in the case of N = 8, corresponding enhancement of 24.1% in PCE when compared with the device without the 1D DBRs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Photonic Crystals and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
5. High-efficiency polymer solar cells achieved by doping plasmonic metallic nanoparticles into dual charge selecting interfacial layers to enhance light trapping10.1002/aenm.201200726 ↗
6. Effect of mixed solvents on PCDTBT: PC70BM based solar cells10.1016/j.orgel.2011.07.011 ↗
8. Acid-functionalized fullerenes used as interfacial layer materials in inverted polymer solar cells10.1016/j.orgel.2013.07.027 ↗
9. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
10. Semitransparent polymer solar cells using V2O5Ag/V2O5 as transparent anodes10.1016/j.orgel.2011.03.036 ↗
11. Stretchable organic solar cells10.1002/adma.201004426 ↗
12. Nanofluid-based optical filter optimization for PV/T systems10.1038/lsa.2012.34 ↗
13. Visibly transparent polymer solar cells produced by solution processing10.1021/nn3029327 ↗
14. Spray-coated silver nanowires as top electrode layer in semitransparent P3HT:PCBM-based organic solar cell devices10.1002/adfm.201202523 ↗
15. Effects of the optical microcavity on the performance of ITO-free polymer solar cells with WO3/Ag/WO3 transparent electrode10.1016/j.solmat.2012.01.021 ↗
16. Fabrication, optical modeling, and color characterization of semitransparent bulk-heterojunction organic solar cells in an inverted structure10.1002/adfm.201000176 ↗
17. Semitransparent organic photovoltaic cells with laminated top electrode10.1021/nl903892x ↗
18. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
19. Semi-transparent tandem organic solar cells with 90% internal quantum efficiency10.1002/aenm.201200204 ↗
20. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
21. Zinc Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell10.1016/j.orgel.2012.01.011 ↗
22. Effects of solvent and annealing on the improved performance of solar cells based on poly (3-hexylthiophene): fullerene10.1063/1.1929875 ↗
23. Solution processable nanocarbon platform for polymer solar cells10.1039/c1ee01333e ↗
24. Highly conductive poly (3,4-ethylenedioxythiophene):poly (styrene sulfonate) films treated with an amphiphilic fluoro compound as the transparent electrode of polymer solar cells10.1039/C1EE02475B ↗
25. Polymer solar cells with NiO hole-collecting interlayers processed by atomic layer deposition10.1016/j.orgel.2013.07.028 ↗
26. Diketopyrrolopyrrole-based π-bridged donor–acceptor polymer for photovoltaic applications10.1021/am200720e ↗
27. Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods10.1016/j.orgel.2009.05.017 ↗
28. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
29. Tandem polymer photovoltaic cells-current status, challenges and future outlook10.1039/c0ee00754d ↗
30. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
31. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
32. Vertical phase separation in poly (3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
33. The dual localized surface plasmonic effects of gold nanodots and gold nanoparticles enhance the performance of bulk heterojunction polymer solar cells10.1016/j.orgel.2013.06.012 ↗
34. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
35. 6.5% EFFICIENCY of polymer solar cells based on poly (3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
36. Molecular packing and solar cell performance in blends of polymers with a bisadduct fullerene10.1021/nl204421p ↗
37. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
38. High performance polymeric charge recombination layer for organic tandem solar cells10.1039/c2ee23294d ↗
39. Inhibited spontaneous emission in solid-state physics and electronics10.1103/PhysRevLett.58.2059 ↗
40. Optimizing one-dimensional photonic-crystals based semitransparent organic solar cells by tailoring reflection phase shift within photonic bandgap10.1063/1.3631675 ↗
41. Ellipsometric determination of permittivity in a negative index photonic crystal metamaterial10.1038/lsa.2012.42 ↗
42. Radiation damping optical enhancement in cold atoms10.1038/lsa.2013.10 ↗
43. Spectral selectivity in infrared thermal detection10.1038/lsa.2012.24 ↗
44. Theory of light propagation in strongly modulated photonic crystals: refraction like behavior in the vicinity of the photonic band gap10.1103/PhysRevB.62.10696 ↗
45. Photonic crystals: putting a new twist on light10.1038/386143a0 ↗
46. Omnidirectional reflection from a one-dimensional photonic crystal10.1364/OL.23.001573 ↗
47. Analytic expressions for the electromagnetic mode density in finite, one-dimensional, photonic band-gap structures10.1103/PhysRevE.53.4107 ↗
48. Semitransparent inverted polymer solar cells using MoO3/Ag/V2O5 as transparent anodes10.1016/j.solmat.2011.09.004 ↗
49. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
50. Minimizing optical losses in bulk heterojunction polymer solar cells10.1007/s00340-006-2542-1 ↗
51. Effects of metal electrode reflection and layer thicknesses on the performance of inverted organic solar cells10.1016/j.solmat.2009.12.017 ↗