journal article·2016-07

Photo-physics of PTB7, PCBM and ICBA based ternary solar cells

Ramakant Sharma, Hyunwoo Lee, Vinay Gupta, Hoyeon Kim, Mahesh Kumar, Chhavi Sharma, Suresh Chand, Seunghyup Yoo, Dipti Gupta

Publisher page

Abstract

Abstract Indene-C 60 bisadduct (ICBA) is one of the rare acceptors which can supersede commonly used phenyl-C71-butyric acid methyl ester (PCBM70) in enhancing the performance of bulk heterojunction (BHJ) solar cells owing to its shallower lowest unoccupied molecular orbital (LUMO) level. However, ICBA tends to decrease the photocurrent for most of the low band-gap polymers synthesized to date. Here we examine the interaction of ICBA with the one of the popular low band-gap polymers poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl) carbonyl] thieno[3,4- b ]thiophenediyl]] (PTB7), at femtosecond level, to explore key dynamics governing the operation of BHJ cells involving ICBA. The photo-physics of binary and ternary systems based on PTB7 coupled with PCBM70 and/or ICBA are studied by means of transient absorption spectroscopy (TAS) and electrochemical impedance spectroscopy (EIS) and supported by morphology analysis. Our study suggests that both inefficient charge-separation and poor charge transport of ICBA is responsible for relatively low photocurrent generation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
2. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
3. Polymer photovoltaic cells – enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
5. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
6. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
7. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
8. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-th) for high performance10.1002/adma.201301476 ↗
9. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
10. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
11. Production aspects of organic photovoltaics and their impact on the commercialization of devices10.1557/mrs2005.10 ↗
12. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C-60 bisadduct by device optimization10.1002/adma.201001339 ↗
13. Indene-C-60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
14. High open-circuit voltage small-molecule p-DTS(FBTTh2)(2):ICBA bulk heterojunction solar cells – morphology, excited-state dynamics, and photovoltaic performance10.1039/C4TA06256F ↗
15. Enhanced open circuit voltage and efficiency of donor-acceptor copolymer solar cells by using indene-C60 bisadduct10.1021/cm300355e ↗
16. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
17. Performance in blends of polymers with a bisadduct fullerene10.1021/nl204421p ↗
18. Efficient ternary blend polymer solar cells with indene-C-60 bisadduct as an electron-cascade acceptor10.1039/c3ee44202k ↗
19. Photoinduced charge transfer in donor-acceptor (DA) copolymer: fullerene bis-adduct polymer solar cells10.1021/am302479u ↗
20. Understanding the reduced efficiencies of organic solar cells employing fullerene multiadducts as acceptors10.1002/aenm.201200673 ↗
21. Charge photogeneration for a series of thiazolo-thiazole donor polymers blended with the fullerene electron acceptors PCBM and ICBA10.1002/adfm.201203148 ↗
22. Charge carrier formation in polythiophene/fullerene blend films studied by transient absorption spectroscopy10.1021/ja076568q ↗
23. 8.9% single-stack inverted polymer solar cells with electron-rich polymer nanolayer-modified inorganic electron-collecting buffer layers10.1002/aenm.201301692 ↗
24. Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers10.1016/j.orgel.2013.07.016 ↗
25. Incorporation of SiO2 dielectric nanoparticles for performance enhancement in P3HT: PCBM inverted organic solar cells10.1016/j.orgel.2015.05.017 ↗
26. Incorporation of silver and gold nanostructures for performance improvement in P3HT: PCBM inverted solar cell with rGO/ZnO nanocomposite as an electron transport layer10.1016/j.orgel.2015.11.015 ↗
27. Effects of incorporation of copper sulfide nanocrystals on the performance of P3HT: PCBM based inverted solar cells10.1016/j.orgel.2014.06.035 ↗
28. Growth of aligned ZnO nanorods array on ITO for dye sensitized solar cell10.1016/j.cap.2010.11.111 ↗
29. Polymer-polymer forster resonance energy transfer significantly boosts the power conversion efficiency of bulk-heterojunction solar cells10.1002/adma.201501275 ↗
30. Charge carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness10.1039/c3ta12358h ↗
31. Inverted vs standard PTB7:PC70BM organic photovoltaic devices. The benefit of highly selective and extracting contacts in device performance10.1016/j.orgel.2014.08.008 ↗
32. A comparison of five experimental techniques to measure charge carrier lifetime in polymer/fullerene solar cells10.1002/aenm.201401345 ↗
33. Influence of interface morphology onto the photovoltaic properties of nanopatterned ZnO/Poly(3-hexylthiophene) hybrid solar cells. an impedance spectroscopy study10.1021/jp203699h ↗