journal article·2014-11

Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies

Oliver Pabst, Stefan Hölzer, Erik Beckert, Jolke Perelaer, Ulrich S. Schubert, Ramona Eberhardt, Andreas Tünnermann

Organic Electronics· Volume 15· Issue 11
Publisher page

Abstract

Abstract All inkjet printed piezoelectric actuators based on poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF–TrFE)) for applications as pump actuators in microfluidic lab-on-a-chip systems (LOC) are manufactured and investigated in terms of their morphology and actuator performance. Furthermore, a pump demonstrator with an all-printed P(VDF–TrFE) actuator is characterized here for the first time. The actuators are manufactured in a fully additive and flexible way by successive inkjet printing of a P(VDF–TrFE) film sandwiched between two silver electrodes on a polyethylene terephthalate (PET) substrate. Different from most current micropumps where actuator elements are fabricated separately, no additional joining step is required in the manufacturing approach employed here. Actuator performance is investigated by measurements of piezoelectric d31 coefficients as well as remanent polarization Prem for different thermal treatments of the as-printed P(VDF–TrFE) films. A strong dependence of the device performance on the annealing temperature is found with maximum values for d31 and Prem of approximately 10 pm V−1 and 5.8 μC cm−2, respectively. Morphology investigations of the printed films by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Atomic Force Microscopy (AFM) indicate an increased degree of crystallinity of the piezoelectric β-phase for samples annealed at temperatures above 110 °C, which coincides with improved device performance. A basic pumping function with pump rates of up to 130 μL min−1 is demonstrated, which is promising for future applications in LOC. Furthermore, the process chain and characterization presented here can be employed to design and manufacture also other P(VDF–TrFE)-based devices and allows the combination with additional printed on-chip functionalities in future LOC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies · Microfluidic and Capillary Electrophoresis Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. 2012
2. Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications10.1557/jmr.2012.419 ↗
3. S. Wünscher, R. Abbel, J. Perelaer, U.S. Schubert, Progress of alternative sintering approaches of inkjet-printed metal inks and their utilization for manufacturing of flexible electronics, J. Mater. Chem. C (accepted manuscript).
4. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
5. Characteristics and evaluation criteria of substrate-based manufacturing. Is roll-to-roll the best solution for printed electronics?10.1016/j.orgel.2014.04.022 ↗
6. Inkjet printing-process and its applications10.1002/adma.200901141 ↗
7. Low-voltage organic thin-film transistors with high-k nanocomposite gate dielectrics for flexible electronics and optothermal sensors10.1002/adma.200700831 ↗
8. An all-printed ferroelectric active matrix sensor network based on only five functional materials forming a touchless control interface
9. Miniaturized total chemical analysis systems: a novel concept for chemical sensing10.1016/0925-4005(90)80209-I ↗
10. Polymer microfabrication technologies for microfluidic systems10.1007/s00216-007-1692-2 ↗
11. A review of micropumps10.1088/0960-1317/14/6/R01 ↗
12. Current micropump technologies and their biomedical applications10.1007/s00542-009-0804-7 ↗
13. A. Olsson, Valve-less diffuser micropumps, Ph.D. Thesis, Royal Institute of Technology Stockholm, Sweden, 1998.
14. Design of IPMC actuator-driven valve-less micropump and its flow rate estimation at low Reynolds numbers10.1088/0964-1726/15/4/024 ↗
15. Relaxor ferroelectric polymers, thin film devices, and ink-jet microprinting for thin film device fabrication10.1080/00150190600946146 ↗
16. All inkjet-printed piezoelectric polymer actuators: characterization and applications for micropumps in lab-on-a-chip systems10.1016/j.orgel.2013.09.009 ↗
17. Investigation of switching characteristics of vinylidene fluoride/trifluoroethylene copolymers in relation to their structures10.1143/JJAP.26.554 ↗
18. Structure and ferroelectric properties of P(VDF–TrFE) copolymers10.1080/00150198908015747 ↗
19. Structure in polymers with special properties
20. Optimization of poly(vinylidene fluoride–trifluoroethylene) films as non-volatile memory for flexible electronics10.1016/j.orgel.2010.02.012 ↗
21. Ferroelectrics – physical effects
22. Inkjet printing of organic electronics – comparison of deposition techniques and state-of-the-art developments10.1039/c2tc00255h ↗
23. Piezoelectric, dielectric, and elastic properties of poly(vinylidene fluoride/trifluoroethylene)10.1063/1.354566 ↗
24. Polarization behavior of poly(vinylidene fluoride–trifluoroethylene) copolymer ferroelectric thin film capacitors for nonvolatile memory application in flexible electronics10.1063/1.3500428 ↗
25. Goodfellow GmbH homepage, Material properties table. (accessed 04.07.2014).
26. Curie transition, ferroelectric crystal structure, and ferroelectricity of a VDF/TrFE(75/25) copolymer 1. The effect of the consecutive annealing in the ferroelectric state on Curie transition and ferroelectric crystal structure10.1002/polb.1994.090321501 ↗
27. N. Shingne, Morphology and crystal orientation of ferroelectric P(VDF-ran-TrFE) nanostructures in porous aluminium oxide, Ph.D. Thesis, University of Halle, Germany, 2011.
28. Annealing effects on the Curie transition temperature and melting temperature of poly(vinylidene fluoride/trifluoroethylene) single crystalline films10.1016/S0032-3861(00)00937-X ↗
29. Ferroelectric polymers10.1126/science.220.4602.1115 ↗
30. Another approach to the Gibbs–Thomson equation and the melting point of polymers and oligomers10.1016/S0032-3861(02)00305-1 ↗
31. Self-nucleation and recrystallization of isotactic polypropylene (α phase) investigated by differential scanning calorimetry10.1002/polb.1993.090311013 ↗
32. Understanding crystallization features of P(VDF–TrFE) copolymers under confinement to optimize ferroelectricity in nanostructures10.1039/c3nr00516j ↗
33. Crystalline structures and phase transition of the ferroelectric P(VDF–TrFE) copolymers, a neutron diffraction study10.1007/s100510050307 ↗
34. Micropumps, microvalves, and micromixers within PCR microfluidic chips: advances and trends10.1016/j.biotechadv.2007.05.003 ↗
35. Micropumps – past, progress and future prospects10.1016/S0925-4005(04)00108-X ↗