Highly stable pressure sensor based on carbonized melamine sponge using fully wrapped conductive path for flexible electronic skin
Source abstract
Abstract
Abstract High-performance stretchable and wearable electronic skins (e-skins) with high sensitivity and large sensing range are urgently required with the rapid development of internet of things and artificial intelligence. Herein, a simple and efficient “dip coating” method was proposed for preparing flexible pressure sensors based on the combination of silicone rubber (SR) and carbonized melamine sponge (CMS). From the as-prepared flexible sensor, good stability, mechanical performances, anti-interference ability, wide working range (0–550 kPa), fast response (~120 ms), frequency-dependent performance, reliable repeatability (~10000 cycle) and stable signal waveform output can be readily obtained. This CMS-based flexible pressure sensor can not only detect human motion (finger bending, knee squatting-arising and plantar pressure changing) in real time and reliably, but also detect the pressure distribution in space through arraying. The experimental results demonstrate that the flexible pressure sensor based on functional-sponge can be a promising candidate for healthcare monitoring and wearable electronics in artificial intelligence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Gas Sensing Nanomaterials and Sensors · Polydiacetylene-based materials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Realization of 3d flexible antennas using liquid metal and additive printing technologies10.1109/LAWP.2016.2615568 ↗
2. Low-cost printed flexible antenna by using an office printer for conformal applications
3. On the applicability of fluidic flexible matrix composite variable impedance materials for prosthetic and orthotic devices10.1088/0964-1726/18/10/104023 ↗
4. A highly stretchable and stable strain sensor based on hybrid carbon nanofillers/polydimethylsiloxane conductive composites for large human motions monitoring10.1016/j.compscitech.2018.01.019 ↗
5. Versatile electronic skins for motion detection of joints enabled by aligned few-walled carbon nanotubes in flexible polymer composites10.1002/adfm.201606604 ↗
6. Monitoring of vital signs with flexible and wearable medical devices10.1002/adma.201504366 ↗
7. Highly concentrated, ultrathin nickel hydroxide nanosheet ink for wearable energy storage devices10.1002/adma.201703455 ↗
8. Toward wearable energy storage devices: paper-based biofuel cells based on a screen-printing array structure10.1002/celc.201700561 ↗
9. Ultra-thin smart electronic skin based on hybrid system-in-foil concept combining three flexible electronics technologies10.1049/el.2017.4682 ↗
10. A system for electrotactile feedback using electronic skin and flexible matrix electrodes: experimental evaluation10.1109/TOH.2016.2618377 ↗
11. Efficient skin temperature sensor and stable gel-less sticky ecg sensor for a wearable flexible healthcare patch10.1002/adhm.201700495 ↗
12. High-resolution flexible temperature sensor based graphite-filled polyethylene oxide and polyvinylidene fluoride composites for body temperature monitoring10.1016/j.sna.2018.05.024 ↗
13. A flexible humidity sensor based on silk fabrics for human respiration monitoring10.1039/C8TC00238J ↗
14. Flexible nanowire cluster as a wearable colorimetric humidity sensor10.1002/smll.201700109 ↗
15. Biomimetic sensor for sweet taste detection based on graphene composite materials10.1016/j.snb.2017.05.109 ↗
16. Highly stretchable strain sensor based on polyurethane substrate using hydrogen bond-assisted laminated structure for monitoring of tiny human motions10.1088/1361-665X/aaaba0 ↗
17. Piezoelectric sensor based on electrospun PVDF-MWCNT-Cloisite 30B hybrid nanocomposites10.1016/j.orgel.2017.07.035 ↗
18. Leveraging innate piezoelectricity of ultra-smooth silk thin films for flexible and wearable sensor applications10.1109/JSEN.2017.2766163 ↗
19. Flexible piezoresistive sensors embedded in 3d printed tires10.3390/s17030656 ↗
20. Graphene-elastomer nanocomposites based flexible piezoresistive sensors for strain and pressure detection10.1016/j.materresbull.2018.02.005 ↗
21. Nanopatterned textile-based wearable triboelectric nanogenerator10.1021/nn507221f ↗
22. A flexible fiber-based supercapacitor-triboelectric-nanogenerator power system for wearable electronics10.1002/adma.201501934 ↗
23. Flexible organic tribotronic transistor for pressure and magnetic sensing10.1021/acsnano.7b06480 ↗
24. Highly flexible organic nanofiber phototransistors fabricated on a textile composite for wearable photosensors10.1002/adfm.201503230 ↗
25. Capacitive wearable tactile sensor based on smart textile substrate with carbon black/silicone rubber composite dielectric10.1088/0957-0233/27/4/045105 ↗
26. Development of wearable and flexible insole type capacitive pressure sensor for continuous gait signal analysis10.1016/j.orgel.2017.11.033 ↗
27. Electrical conductivity transformation mechanism of gnps/cb/sr nanocomposite foams10.1002/app.45996 ↗
28. Ultrasensitive multi-functional flexible sensors based on organic field-effect transistors with polymer-dispersed liquid crystal sensing layers10.1038/s41598-017-02160-x ↗
29. Ultrasensitive piezoresistive pressure sensors based on interlocked micropillar arrays10.1007/s12668-014-0151-8 ↗
30. Pressure-sensitive carbon black/graphene nanoplatelets-silicone rubber hybrid conductive composites based on a three-dimensional polydopamine-modified polyurethane sponge10.1007/s10854-017-6693-0 ↗
31. Fabrication of a flexible and stretchable three-dimensional conductor based on Au–Ni@graphene coated polyurethane sponge by electroless plating10.1039/C8TC02413H ↗
32. Self-healing sensors based on dual noncovalent network elastomer for human motion monitoring10.1002/marc.201700406 ↗