journal article·2010-04

Durability under mechanical bending of the indium tin oxide films deposited on polymer substrate by thermionically enhanced sputtering

Y.F. Lan, W.C. Peng, Y.H. Lo, J.L. He

Organic Electronics· Volume 11· Issue 4
Publisher page

Abstract

Abstract The emerging demand for flexible display panels has created a demand for coating techniques capable of depositing high-quality transparent conductive coatings (TCOs) on polymeric materials. This study demonstrates indium tin oxide (ITO) films deposited on polyethylene terephthalate (PET) substrates using a thermionic emission (TE) enhanced DC magnetron sputtering system to improve electrical and optical properties under static and dynamic mechanical bending. Experimental results show that the ITO-coated PET specimen prepared with TE and without TE presents an average transmittance in the visible region of the spectrum of 83% and 70%, and an electrical resistivity of 4.5 × 10 −4 and 1.7 × 10 −3 Ω cm, respectively. By contrast, the static bending test revealed that the critical radius of curvature ( R c ) is 13.9 and 17.0 mm for the ITO-coated PET with and without TE. The dynamic bending test showed that the ITO-coated PET with TE is durable for more than 1200 cycles, while the corresponding number for the ITO-coated PET without TE is smaller than 50 cycles for the ITO-coated PET without TE. These results evidence that the ITO film deposited using the TE approach exhibits a higher degree of crystallinity and film adhesion than that deposited without TE. TE improves optical and electrical properties of the ITO coatings and their longer durability under mechanical bending.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · ZnO doping and properties · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Stable organic thin-film transistor in a pixel for plastic electronics10.1016/j.orgel.2008.08.002 ↗
2. Transparent and conducting ITO films: new developments and applications10.1016/S0040-6090(02)00163-3 ↗
3. New low band-gap alternating polyfluorene derivatives for photovoltaic cells10.1016/j.tsf.2005.12.126 ↗
4. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
5. Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substrates10.1016/j.tsf.2004.11.040 ↗
6. Properties of ITO on PET film in dependence on the coating conditions and thermal processing10.1016/j.surfcoat.2005.02.040 ↗
7. Mechanical modeling of flexible OLED devices10.1016/j.orgel.2009.07.003 ↗
8. Polymers for flexible displays: from material selection to device applications10.1016/j.progpolymsci.2007.11.004 ↗
9. Low-temperature deposition of ZnO thin films on PET and glass substrates by DC-sputtering technique10.1016/j.tsf.2005.08.258 ↗
10. Bias voltage dependence of properties for depositing transparent conducting ITO films on flexible substrate10.1016/S0040-6090(00)00919-6 ↗
11. Influence of negative metal ion bombardment on the properties of ITO PET films deposited by dc magnetron sputtering10.1016/j.jnoncrysol.2003.09.024 ↗
12. ITO thin films deposited at low temperatures using a kinetic energy controlled sputter-deposition technique10.1016/S0040-6090(02)00170-0 ↗
13. Indium tin oxide films deposited by thermionic-enhanced DC magnetron sputtering on unheated polyethylene terephthalate polymer substrate10.1016/j.materresbull.2009.03.007 ↗
14. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates10.1063/1.126052 ↗
15. Influence of the strain on the electrical resistance of zinc oxide doped thin film deposited on polymer substrates10.1002/1527-2648(20020806)4:8<610::AID-ADEM610>3.0.CO;2-1 ↗
16. Adhesion of silicon oxide layers on poly(ethylene terephthalate). 1. Effect of substrate properties on coating’s fragmentation process10.1002/(SICI)1099-0488(19970715)35:9<1449::AID-POLB15>3.0.CO;2-6 ↗
17. ASTM D3359, Standard test methods for measuring adhesion by Tape Test, American Society for Testing and Materials, 2002.
18. ASTM D1593, Standard specification for nonrigid vinyl chloride plastic film and sheeting, American Society for Testing and Materials, 1999.
19. Influence of energetic bombardment onstress resistivity and microstructure of indium tin oxide films grown by radio frequency magnetron sputtering on flexible polyester substrates10.1116/1.1566789 ↗
20. Bulk phase relations conductivity, and transparency in novel bixbyite transparent conducting10.1111/j.1151-2916.2001.tb00782.x ↗
21. Effects of heat treatment on properties of ITO films prepared by rf magnetron sputtering10.1016/j.vacuum.2004.01.081 ↗
22. Structural electrical and optical studies on chemically deposited tin oxide films from inorganic precursors
23. Crystallization and decrease in resistivity on heat treatment of amorphous indium tin oxide thin films prepared by dc Magnetron sputtering10.1016/S0040-6090(98)01156-0 ↗
24. Electrical optical, and structural properties of indium-tin-oxide thin films for organic light-emitting devices10.1063/1.371708 ↗
25. Electron scattering mechanisms in indium-tin-oxide thin films prepared at the various process conditions10.1016/j.apsusc.2005.03.203 ↗
26. Effects of oxygen radical on the properties of indium tin oxide thin films deposited at room temperature by oxygen ion beam assisted evaporation10.1016/S0040-6090(00)01392-4 ↗
27. Effect of oxygen plasma etching on adhesion between polyimide films and metal10.1016/S0040-6090(96)09017-7 ↗
28. Adhesion enhancement of optical coatings on plastic substrate via ion treatment10.1016/S0040-6090(98)01753-2 ↗
29. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
30. Reliability of transparent conducting substrates for rollable displays: a cyclic loading investigation10.1889/1.1824238 ↗