MoO3–Au composite interfacial layer for high efficiency and air-stable organic solar cells
Source abstract
Abstract
Abstract Efficient and stable polymer bulk-heterojunction solar cells based on regioregular poly(3-hexylthiophene):[6,6]-phenyl-C 61 -butyric acid methyl ester (P3HT:PC 61 BM) blend active layer have been fabricated with a MoO 3 –Au co-evaporation composite film as the anode interfacial layer (AIL). The optical and electrical properties of the composite MoO 3 –Au film can be tuned by altering the concentration of Au. A composite film with 30% (weight ratio) Au was used as the AIL and showed a better performance than both pure MoO 3 and PEDOT:PSS as AIL. The surface morphology of the MoO 3 –Au composite film was investigated by atomic force microscopy (AFM) and showed that the originally rough ITO substrate became smooth after depositing the composite film, with the root mean square roughness (RMS) decreased from 4.08 nm to 1.81 nm. The smooth surface reduced the bias-dependent carrier recombination, resulting in a large shunt resistance and thus improving the fill factor and efficiency of the devices. Additionally, the air stability of devices with different AILs (MoO 3 –Au composite, MoO 3 and PEDOT:PSS) were studied and it was found that the MoO 3 –Au composite layer remarkably improved the stability of the solar cells with shelf life-time enhanced by more than 3 and 40 times compared with pure MoO 3 layer and PEDOT:PSS layer, respectively. We argue that the stability improvement might be related with the defect states in MoO 3 component.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
4. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
5. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
6. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
7. Design rules for donors in bulk-heterojunction tandem solar cells towards 15% energy-conversion efficiency10.1002/adma.200702337 ↗
8. Current trends in the optimization of low band gap polymers in bulk heterojunction photovoltaic devices10.1039/c0jm04433d ↗
9. An effective light trapping configuration for thin-film solar cells10.1063/1.2789677 ↗
10. Light-trapping nano-structures in organic photovoltaic cells10.1039/c1jm12300a ↗
11. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
12. Thermally stable efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
13. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
14. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
15. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
16. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
17. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
18. High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO10.1016/j.solmat.2011.09.030 ↗
19. Enhancement of short current density in polymer solar cells with phthalocyanine tin (IV) dichloride as interfacial layer10.1016/j.solmat.2011.05.038 ↗
20. Stability of the interface between indium–tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
21. Influence of cathode oxidation via the hole extraction layer in polymer: fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
22. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
23. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
24. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
25. Transparent conducting C60: LiF nanocomposite thin films for organic light-emitting diodes10.1063/1.2780115 ↗
26. C60: LiF blocking layer for environmentally stable bulk heterojunction solar cells10.1002/adma.201002738 ↗
27. High-efficiency inverted polymer solar cells with transparent and work-function tunable MoO3–Al composite film as cathode buffer layer10.1002/adma.201200238 ↗
28. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
29. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗
30. Performance improvement of polymer solar cells by using a solvent-treated poly(3-4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer10.1063/1.3600665 ↗
31. Simple routes for improving polythiophene: fullerene-based organic solar cells10.1016/j.orgel.2010.11.008 ↗
32. Fabrication of OPVs by introducing a conductivity-enhanced hybrid buffer layer10.1016/j.solmat.2012.01.027 ↗
33. Effect of contamination on the electronic structure and hole-injection properties of MoO3/organic semiconductor interfaces10.1063/1.3374333 ↗
34. Transition metal oxide work function: the influence of cation oxidation state and oxygen vacancies
35. M.T. Greiner, L. Chai, M.G. Helander, W.M. Tang, Z.H. Lu, Metal/metal–oxide interface: how metal contacts affect the work function and band structure of MoO3, Advanced Functional Materials. doi:10.1002/adfm.201200993.10.1002/adfm.201200993 ↗
36. Simulation of light intensity dependent current characteristics of polymer solar cells10.1063/1.1646435 ↗
37. Nanomaterials of high surface energy with exceptional properties in catalysis and energy storage10.1039/c0cs00176g ↗
38. Stability of polymer solar cells10.1002/adma.201104187 ↗
39. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
40. n-Type transition metal oxide as a hole extraction layer in PbS quantum dot solar cells10.1021/nl2015729 ↗
41. Investigating the stability of defects in MoO3 and its role in organic solar cells10.1016/j.solmat.2011.11.041 ↗
42. Hybrid solar cells based on MEH-PPV and thin film semiconductor oxides (TiO2, Nb2O5, ZnO, CeO2 and CeO2–TiO2): performance improvement during long-time irradiation10.1016/j.solmat.2006.02.007 ↗
43. Photoluminescence enhancement and atmosphere-dependent photovoltaic performance in CdS nanorod arrays/MEH-PPV hybrid10.1016/j.solmat.2011.07.014 ↗