journal article·2015-10

All-printed and highly stable organic resistive switching device based on graphene quantum dots and polyvinylpyrrolidone composite

Shawkat Ali, Jinho Bae, Chong Hyun Lee, Kyung Hyun Choi, Yang Hoi Doh

Publisher page

Abstract

Abstract We propose all printed and highly stable organic resistive switching device (ORSD) based on graphene quantum dots (G-QDs) and polyvinylpyrrolidone (PVP) composite for non-volatile memory applications. It is fabricated by sandwiching G-QDs/PVP composite between top and bottom silver (Ag) electrodes on a flexible substrate polyethylene terephthalate (PET) at ambient conditions through a cost effective and eco-friendly electro-hydrodynamic (EHD) technique. Thickness of the active layer is measured around 97 nm. The proposed ORSD is fabricated in a 3 × 3 crossbar array. It operates switching between high resistance state (HRS) and low resistance state (LRS) with OFF/ON ratio ∼14 for more than 500 endurance cycles, and retention time for more than 30 days. The switching voltage for set/reset of the devices is ±1.8 V and the bendability down to 8 mm diameter for 1000 cycles are tested. The elemental composition and surface morphology are characterized by XPS, FE-SEM, and microscope.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Conducting polymers and applications · Neuroscience and Neural Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. The fourth circuit element10.1038/nature06932 ↗
2. Memristor – the missing circuit element10.1109/TCT.1971.1083337 ↗
3. R.D. Isaac, Reaching the limits of CMOS technology, Electrical performance of electronic packaging, in: IEEE 7th Topical Meeting on, 1998, 1998, pp. 26–28.
4. N.Z. Haron, S. Hamdioui, Why is CMOS Scaling Coming to an END? Design and Test Workshop, IDT 3rd International, 2008, pp. 98–103.10.1109/IDT.2008.4802475 ↗
5. The end of CMOS scaling: toward the introduction of new materials and structural changes to improve MOSFET performance, Circuits and Devices Magazine10.1109/MCD.2005.1388765 ↗
6. C.H. Wang, Y.H. Tsai, K.C. Lin, M.-F. Chang, Y.C. King, C.J. Lin, S.S. Sheu, Y.S. Chen, H.Y. Lee, F.T. Chen, M.J. Tsai, Three-dimensional 4F2 ReRAM cell with CMOS logic compatible process, in: IEDM Tech Dig., 2010, pp. 664–667.
7. High-density crossbar arrays based on a Si memristive system Sung Hyun Jo10.1021/nl8037689 ↗
8. 4K-bit and microlithographic integration of organic nonvolatile resistive memory devices10.1016/j.orgel.2014.12.008 ↗
9. Organic non-volatile memory cell based on resistive elements through electro-hydrodynamic technique10.1016/j.orgel.2014.11.028 ↗
10. Effects of metal contacts and dopants on the performance of ZnO-based memristive devices10.1063/1.3599952 ↗
11. Polar charges induced electric hysteresis of ZnO nano/microwire for fast data storage10.1063/1.1806283 ↗
12. Switching the electrical resistance of individual dislocations in single crystalline SrTiO310.1038/nmat1614 ↗
13. Properties of fluorinated graphene films10.1021/nl101437p ↗
14. Graphene Oxide Thin FilmsforFlexible Nonvolatile Memory Applications10.1021/nl101902k ↗
15. A roadmap for graphene10.1038/nature11458 ↗
16. The rise of graphene10.1038/nmat1849 ↗
17. Challenges and opportunities in graphene commercialization10.1038/nnano.2014.225 ↗
18. A role for graphene in silicon-based semiconductor devices10.1038/nature10680 ↗
19. Low operational voltage and high performance organic field effect memory transistor with solution processed graphene oxide charge storage media10.1016/j.orgel.2014.08.002 ↗
20. Graphenephotonics, plasmonics, and broadband optoelectronic devices10.1021/nn300989g ↗
21. High-performance polymer light emitting diodes with interface-engineered graphene anodes10.1016/j.orgel.2013.05.033 ↗
22. Superior thermal conductivity of single-layer graphene10.1021/nl0731872 ↗
23. The interaction of Li+ with single-layer and few-layer graphene10.1021/nl101223k ↗
24. Graphene quantum dots10.1002/ppsc.201300252 ↗
25. Colloidal graphene quantum dots10.1021/jz100862f ↗
26. Nanoionics-based resistive switching memories10.1038/nmat2023 ↗
27. Resistive switching and current conduction mechanism in full organic resistive switch with the sandwiched structure of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/poly(4-vinylphenol)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)10.1007/s13391-014-3149-z ↗
28. Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition10.1063/1.2001146 ↗
29. The mechanism of electroforming of metal oxide memristive switches10.1088/0957-4484/20/21/215201 ↗
30. A flexible solution processed memristor10.1109/LED.2009.2021418 ↗
31. Memristive behavior in thin anodic titania10.1109/LED.2010.2049092 ↗
32. Sirringhaus · Science · 2000 · 290 · 212310.1126/science.290.5499.2123 ↗
33. Additive manufacturing technologies compared: morphology of deposits of silver ink using inkjet and aerosol jet printing10.1021/ie503636c ↗
34. Mitzi · 2009
35. R.P.A. Hartman, Electrohydrodynamic Atomization in the Cone-jet Mode (Ph.D. thesis), TU Delft, 1998.
36. Design of versatile printed organic resistor based on resistivity (ρ) control10.1007/s00339-015-9127-y ↗
37. Low-power high-performance non-volatile memory on a flexible substrate with excellent endurance10.1002/adma.201002946 ↗