journal article·2011-07

High-color-rendering flexible top-emitting warm-white organic light emitting diode with a transparent multilayer cathode

Wenyu Ji, Jialong Zhao, Zaicheng Sun, Wenfa Xie

Organic Electronics· Volume 12· Issue 7
Publisher page

Abstract

A top-emitting warm-white organic light emitting diode (TEWOLED) was fabricated with a conductive transparent MAM cathode [MAM = MoO3 (40 nm)/Ag (17 nm)/MoO3 (40 nm)], which had a higher color rendering index (CRI) than that of corresponding ITO-based bottom-emitting organic light-emitting device (OLED). We measured and calculated the optical transmittance of multilayer MAM fabricated on PET substrate by vacuum thermal evaporation. The average transmittance in visible range is above 84%, which is similar to the conventional indium tin oxide (ITO). The weak microcavity effect on the device performance was also studied. MAM multilayer has the potential for using as transparent conductor electrodes for white OLEDs, especially for flexible devices due to its unique optical and electrical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. High-efficiency fluorescent organic light-emitting devices using a phosphorescent sensitizer10.1038/35001541 ↗
2. White Organic Light-Emitting Devices for Solid-State Lighting10.1002/adma.200400684 ↗
3. High-efficiency and color-stable white organic light-emitting devices based on sky blue electrofluorescence and orange electrophosphorescence10.1038/nature04645 ↗
4. High-efficiency and color-stable white organic light-emitting devices based on sky blue electrofluorescence and orange electrophosphorescence10.1063/1.2883935 ↗
5. A multifunctional iridium-carbazolyl orange phosphor for high-performance two-element WOLED exploiting exciton-Managed fluorescence/phosphorescence10.1002/adfm.200701115 ↗
6. Highly efficient organic blue-and white-light-emitting devices having a carrier- and exciton-confining structure for reduced efficiency roll-off10.1002/adma.200801375 ↗
7. White organic light-emitting diodes with fluorescent tube efficiency10.1038/nature08003 ↗
8. ZnO as a dielectric for organic thin film transistor-based non-volatile memory10.1016/j.mee.2009.02.034 ↗
9. Very low hysteresis organic thin-film transistors10.1088/0268-1242/24/8/085009 ↗
10. Fabrication of the flexible pentacene thin-film transistors on 304 and 430 stainless steel (SS) substrate10.1016/j.orgel.2009.05.005 ↗
11. Integration of surface-micromachined polysilicon mirrors and a standard CMOS process10.1016/0924-4247(96)80139-7 ↗
12. Integration of sputtered silicon microstructures with pre-fabricated CMOS circuitry10.1016/S0924-4247(01)00612-4 ↗
13. Fabrication of a CMOS compatible pressure sensor for harsh environments10.1088/0960-1317/14/11/007 ↗
14. High-efficiency top-emissive white-light-emitting organic electrophosphorescent devices10.1063/1.1947376 ↗
15. Highly efficient top-emitting white organic electroluminescent devices10.1063/1.1953883 ↗
16. Efficient, long-life and Lambertian source of top-emitting white OLEDs using low-reflectivity molybdenum anode and co-doping technology10.1016/j.cap.2007.11.002 ↗
17. White top-emitting organic light-emitting diodes using one-emissive layer of the DCJTB doped DPVBi layer10.1016/j.tsf.2007.08.078 ↗
18. Top-emitting white organic light-emitting devices with a one-dimensional metallic-dielectric photonic crystal anode10.1364/OL.34.002703 ↗
19. High-contrast and high-efficiency microcavity top-emitting white organic light-emitting devices10.1016/j.orgel.2009.10.016 ↗
20. Top-emitting white organic light-emitting devices with down-conversion phosphors: Theory and experiment10.1364/OE.16.015489 ↗
21. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates10.1063/1.126052 ↗
22. Highly flexible transparent electrodes for organic light-emitting diode-based displays10.1063/1.1806559 ↗
23. Transparent heat-mirror films of TiO2/Ag/TiO2 for solar energy collection and radiation insulation10.1063/1.1655364 ↗
24. Dependence of film composition and thicknesses on optical and electrical properties of ITO-metal-ITO multilayers10.1016/S0040-6090(98)00520-3 ↗
25. Highly flexible and transparent InZnSnOx/Ag/InZnSnOx multilayer electrode for flexible organic light emitting diodes10.1063/1.2937845 ↗
26. ZnS/Ag/ZnS coating as transparent anode for organic light emitting diodes10.1016/j.jlumin.2006.01.232 ↗
27. Transparent organic light emitting diodes using a multilayer oxide as a low resistance transparent cathode10.1063/1.2955528 ↗
28. Transparent organic light-emitting diodes consisting of a metal oxide multilayer cathode10.1063/1.2835044 ↗
29. Generalized matrix method for analysis of coherent and incoherent reflectance and transmittance of multilayer structures with rough surfaces, interfaces, and finite substrates10.1364/AO.34.001678 ↗
30. White top-emitting organic light-emitting diodes with forward directed emission and high color quality10.1016/j.orgel.2010.07.017 ↗
31. Color-converting combinations of nanocrystal emitters for warm-white light generation with high color rendering index10.1063/1.2833693 ↗
32. Transient analysis of organic electrophosphorescence. II. Transient analysis of triplet-triplet annihilation10.1103/PhysRevB.62.10967 ↗
33. Triplet-exciton quenching in organic phosphorescent light-emitting diodes with Ir-based emitters10.1103/PhysRevB.75.125328 ↗
34. Soft X-ray spectroscopy of C60/copper phthalocyanine/MoO3 interfaces: role of Reduced MoO3 on energetic band alignment and improved performance10.1021/jp1071428 ↗