A comparative assessment of surface microstructure and electrical conductivity dependence on co-solvent addition in spin coated and inkjet printed poly(3,4-ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS)
Source abstract
Abstract
Abstract This study focuses on the fabrication of poly(3,4-ethylenedioxythiophene):polystyrene sulphonate (PEDOT:PSS) thin films by inkjet printing and investigates the developed surface morphology and electrical conductivity of the printed films as a function of the concentration of dimethyl sulfoxide (DMSO), added as conduction enhancing co-solvent, and Surfynol, added as a surfactant. The printed films are compared with PEDOT:PSS films fabricated by the traditional spin coating technique. Measurements of the surface tension justify including surfactant as a processing additive, where addition of 1% Surfynol results in substantial decrease of the surface tension of the PEDOT:PSS solution, whilst it also increases film surface roughness by an order of magnitude for both fabrication methods. The addition of 5 wt% DMSO is shown to result in a 10 3 decrease in sheet resistance for both spin coated and inkjet printed films with both processing routes demonstrating decrease in surface roughness and coarsening of PEDOT grains as a function of the co-solvent concentration, whilst X-ray photon spectroscopy showed an increase in the surface PEDOT to PSS ratio from 0.4 to 0.5. Inkjet printed films have lower sheet resistance than the corresponding spin coated films, whilst atomic force microscopy reveals a coarser surface morphology for the inkjet printed films. The findings in this work point out at the decrease of sheet resistance due to coarsening of PEDOT grains which is linked to a decrease of surface roughness for small RMS values associated with the PEDOT grains. However, the higher surface roughness generated when Surfynol surfactant was added was not detrimental to the film’s in-plane conductivity due to the fact that these higher roughness values were unrelated to the PEDOT grains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Molecular organic light-emitting diodes using highly conducting polymers as anodes10.1063/1.1480100 ↗
2. Characterization of PEDOT:PSS dilutions for inkjet printing applied to OLED fabrication, 7th International Caribbean Conference on Devices
3. Fabrication of organic light emitting display using inkjet printing technology10.1109/ISOT.2009.5326101 ↗
4. Interface attachability analysis of printed patterns through electrostatic inkjet system
5. V.J. Shah, D.B. Wallace, Low-cost Solar Cell Fabrication by Drop-on-Demand Ink-jet Printing, IMAPS 37th (November 14–18, 2004).
6. Towards optimization of P3HT:bisPCBM composites for highly efficient polymer solar cells10.1039/c0jm00790k ↗
7. Annealing treatment effect on photoelectric properties of P3HT:PCBM blend system10.3866/PKU.WHXB20080530 ↗
8. Annealing-free high efficiency and large area polymer solar cells fabricated by a roller painting process10.1002/adfm.201000164 ↗
9. S.Y.Y. Leung, D.C.C. Lam, Geometric and compaction dependence of printed polymer-based RFID tag antenna performance, 2007 International Conference on Electronic Materials and Packaging (2007) 166–172.10.1109/EMAP.2007.4510299 ↗
10. A.Y. Natori, A.M.F. Frasson, A.M. Ceschin. Organic conducting films fabricated with ink jet printing technology and possible application in electric-field probes. in Microwave and Optoelectronics Conference, IMOC 2003. Proceedings of the 2003 SBMO/IEEE MTT-S International (2003).
11. Device performance and polymer morphology in polymer light emitting diodes: the control of thin film morphology and device quantum efficiency10.1063/1.373062 ↗
12. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
13. Highly efficient inkjet-printed organic photovoltaic cells10.1143/JJAP.49.05EB03 ↗
14. Polymeric anodes from PEDOT:PSS for 3.5% efficient organic solar cells10.1016/j.tsf.2009.03.212 ↗
15. A comparative study of electrode effects on the electrical and luminescent characteristics of Alq3/TPD OLED: improvements due to conductive polymer (PEDOT) anode10.1016/j.jlumin.2006.07.005 ↗
16. Thermal inkjet microdeposition of PEDOT:PSS on ITO-coated glass and characterization of the obtained film10.1016/j.synthmet.2004.07.006 ↗
17. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
18. Polymer solar cells based on inkjet-printed PEDOT:PSS layer10.1016/j.orgel.2009.01.015 ↗
19. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
20. A new method for significantly reducing drop radius10.1063/1.1427441 ↗
21. A.U. Chen, O.A. Basaran, Method and apparatus for producing drops using a drop-on-demand dispenser, US Patent, 6513,894 B1 (February 2003).
22. The effects of solvents on the morphology and sheet resistance in poly (3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films10.1016/S0379-6779(02)01259-6 ↗
23. High-conductivity poly (3,4-ethylenedioxythiophene):poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
24. A morphological model for the solvent-enhanced conductivity of PEDOT:PSS thin films10.1002/adfm.200700796 ↗
25. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
26. Anisotropic hopping conduction in spin-coated PEDOT:PSS thin films10.1103/PhysRevB.76.085208 ↗
27. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗
28. Contact line deposits in an evaporating drop10.1103/PhysRevE.62.756 ↗
29. Pattern formation in drying drops10.1103/PhysRevE.61.475 ↗
30. B. Zhmud, Dynamic aspects of ink-paper interactions in relation to inkjet printing, Pira International Conference: Ink on Paper (2003) Brussels, Belgium.
31. Inkjet printing of single-walled carbon nanotubes and electrical characterization of the line pattern10.1088/0957-4484/19/9/095702 ↗
32. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
33. Characterisation of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT:PSS) adsorption on cellulosic materials10.1007/s10570-009-9303-3 ↗
34. Effects of solvent on carrier transport in poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate)10.1016/j.synthmet.2005.07.214 ↗