Highly reliable hybrid nano-stratified moisture barrier for encapsulating flexible OLEDs
Source abstract
Abstract
Abstract Herein, a novel thin-film encapsulation for flexible organic light-emitting diodes (FOLEDs) is proposed, and its long-term reliability in tensile stress conditions was tested. The hybrid nano-stratified moisture barrier consists of 2.5 dyads of an Al 2 O 3 /ZnO nano-stratified structure and a S-H nanocomposite organic layer. The nano-stratified structure is prepared by low-temperature atomic layer deposition and the S-H nanocomposite by spin-coating at a thickness of 30 and 120 nm, respectively. An optical transmittance of 89.05% was measured with the 2.5-dyad hybrid nano-stratified moisture barrier with a total thickness of 330 nm. A low water vapor transmission rate (WVTR) of 1.91 × 10 −5 g/m 2 day was recorded based on an electrical Ca test at 30 °C and 90% R.H. without losing its properties after a bending test. With this highly reliable hybrid nano-stratified moisture barrier, FOLEDs were successfully encapsulated. After 30 days under conditions of 30 °C and 90% R.H. with tensile stress, the J-V-L performances of the FOLEDs were comparable to those of the initial state without dark spots. These results suggest that this hybrid nano-stratified moisture barrier is an excellent method for encapsulating FOLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Semiconductor Lasers and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Ultra barrier flexible substrates for flat panel displays10.1016/S0141-9382(00)00064-0 ↗
2. Plastic substrates for flexible displays10.1143/JJAP.45.4325 ↗
3. Degradation of organic light-emitting devices due to formation and growth of dark spots10.1016/S0921-5107(01)00599-2 ↗
4. Degradation of organic light-emitting diodes under different environment at high drive conditions10.1016/j.orgel.2006.10.005 ↗
5. Degradation and failure of organic light-emitting devices10.1063/1.1464216 ↗
6. Reliability and degradation of organic light emitting devices10.1063/1.112532 ↗
7. Flexible lamination encapsulation10.1002/adma.201501856 ↗
8. Flexible organic light-emitting diodes for solid-state lighting10.1117/1.JPE.5.053599 ↗
9. A new method for fabricating transparent barrier layers10.1016/S0040-6090(96)09202-4 ↗
10. Gas diffusion barriers on polymers using Al2O3 atomic layer deposition10.1063/1.2168489 ↗
11. Flexible fluorescent white organic light emitting diodes with ALD encapsulation10.1016/j.jpcs.2015.04.008 ↗
12. Organic light-emitting devices with extended operating lifetimes on plastic substrates10.1063/1.1514831 ↗
13. Thin film encapsulation for organic light emitting diodes using a multi-barrier composed of MgO prepared by atomic layer deposition and hybrid materials10.1016/j.orgel.2013.04.011 ↗
14. The encapsulation of an organic light-emitting diode using organic–inorganic hybrid materials and MgO10.1016/j.orgel.2011.01.007 ↗
15. Mechanisms of vapor permeation through multilayer barrier films: Lag time versus equilibrium permeation10.1063/1.1768610 ↗
16. Reliable thin film encapsulation for organic light emitting diodes grown by low-temperature atomic layer deposition10.1063/1.3153123 ↗
17. Optimization of Al2O3/ZrO2 nanolaminate structure for thin-film encapsulation of OLEDs10.1016/j.orgel.2012.07.007 ↗
18. Electrical calcium test for moisture barrier evaluation for organic devices10.1063/1.3633956 ↗
19. A flexible moisture barrier comprised of a SiO2-embedded organic–inorganic hybrid nanocomposite and Al2O3 for thin-film encapsulation of OLEDs10.1016/j.orgel.2013.03.008 ↗
20. Silica nanoparticle-embedded sol–gel organic/inorganic hybrid nanocomposite for transparent OLED encapsulation10.1016/j.orgel.2011.09.008 ↗
21. ITO-free flexible organic light-emitting diode using ZnS/Ag/MoO3 anode incorporating a quasi-perfect Ag thin film10.1016/j.orgel.2013.09.014 ↗