Zinc Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell
Source abstract
Abstract
Abstract Solution processed, high electron mobility and highly transparent Zinc Tin Oxide (ZTO) was successfully exploited as electron transporting buffer layer in an inverted organic solar cell. The device configuration of FTO/ZTO/P3HT:PCBM/WO3/Ag was employed. For comparison, an identical device using a sol–gel derived TiOx electron extracting layer was also fabricated. Increased short-circuit density (Jsc) and open-circuit voltage (Voc) were generated in the devices with ZTO layer in comparison to the ones with TiOx layer. It is attributed to a better electron transporting, hole blocking capacities and reduced recombination probabilities at electron collecting electrode with ZTO layer. A power conversion efficiency of 3.05% was achieved with ZTO devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
2. For the bright future – bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
3. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
4. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
5. Interface modification for highly efficient organic photovoltaics10.1063/1.2885724 ↗
6. Efficient semitransparent inverted organic solar cells with indium tin oxide top electrode10.1063/1.3154556 ↗
7. Inverted type bulk-heterojunction organic solar cell using electrodeposited titanium oxide thin films as electron collector electrode10.1016/j.tsf.2008.12.039 ↗
8. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
9. Structural instability of Sn-doped In2O3 thin films during thermal annealing at low temperature10.1016/j.tsf.2007.01.040 ↗
10. Improvement of the performance of inverted polymer solar cells with a fluorine-doped tin oxide electrode10.1016/j.cap.2010.11.027 ↗
11. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
12. High mobility transparent thin-film transistors with amorphous Zinc Tin Oxide channel layer10.1063/1.1843286 ↗
13. Solution-processed zinc-tin oxide thin-film transistors with low interfacial trap density and improved performance10.1063/1.3454241 ↗
14. Inkjet-printed Zinc Tin Oxide thin-film transistor10.1021/la901436p ↗
15. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
16. Origins of high mobility and low operation voltage of amorphous oxide tfts: electronic structure, electron transport, defects and doping∗10.1109/JDT.2009.2034559 ↗
17. Surface energy and polarity of treated indium–tin–oxide anodes for polymer light-emitting diodes studied by contact-angle measurements10.1063/1.371124 ↗
18. Investigation of photophysical, morphological and photovoltaic behavior of poly(p-phenylene vinylene) based polymer/oligomer blends10.1016/j.tsf.2010.04.115 ↗
19. Effective variables to control the fill factor of organic photovoltaic cells10.1021/am900155y ↗
20. Effect of the interface morphology on the fill factor of plastic solar cells10.1016/j.tsf.2005.06.098 ↗