journal article·2015-09

Metal salt modified PEDOT:PSS as anode buffer layer and its effect on power conversion efficiency of organic solar cells

Burak Kadem, Wayne Cranton, Aseel Hassan

Publisher page

Abstract

The effects of metal chlorides such as LiCl, NaCl, CdCl 2 and CuCl 2 on optical transmittance, electrical conductivity as well as morphology of PEDOT:PSS films have been investigated. Transmittance spectra of spun PEDOT:PSS layers were improved by more than 6% to a maximum of 94% in LiCl doped PEDOT:PSS film. The surface of the PEDOT:PSS films has exhibited higher roughness associated with an increase in the electrical conductivity after doping with metal salts. The improvement in the physical properties of PEDOT:PSS as the hole transport layer proved to be key factors towards enhancing the P3HT:PCBM bulk heterojunction (BHJ) solar cells. These improvements include significantly improved power conversion efficiency with values as high as 6.82% associated with high fill factor (61%) and larger short circuit current density (∼18 mA cm −2).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Chemical and Physical Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Thickness dependent enhanced efficiency of polymer solar cells with gold nanorods embedded in the photoactive layer10.1016/j.solmat.2013.03.037 ↗
2. High-efficiency inverted polymer solar cells via dual effects of introducing the high boiling point solvent and the high conductive PEDOT:PSS layer10.1016/j.orgel.2014.06.001 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
4. Bulk heterojunction photovoltaic cells based on tetra-methyl substituted copper(II) phthalocyanine: P3HT:PCBM composite10.1039/c1cc13827h ↗
5. Study of the effect of DMSO concentration on the thickness of the PSS insulating barrier in PEDOT:PSS thin films10.1016/j.synthmet.2010.05.010 ↗
6. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)–polystyrene sulfonic acid (PEDOT:PSS) films10.1016/S0379-6779(02)01259-6 ↗
7. Correlation of morphology and charge transport in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT:PSS) films10.1088/0953-8984/21/7/072101 ↗
8. Enhancing efficiency with fluorinated interlayers in small molecule organic solar cells10.1039/c2jm34091g ↗
9. Interface materials for organic solar cells10.1039/b921624c ↗
10. PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
11. ‘‘Secondary doping’’ methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices10.1016/j.displa.2013.08.007 ↗
12. Modification of PEDOT:PSS anode buffer layer with HFA for flexible polymer solar cells10.1016/j.cplett.2013.04.022 ↗
13. Flexible dye-sensitized solar cell based on PCBM/P3HT heterojunction10.1007/s11434-010-3080-0 ↗
14. Characterisation of nano-interdigitated electrodes10.1088/1742-6596/100/5/052045 ↗
15. Highly conductive poly(3,4-ethylenedioxythiophene): poly (styrenesulfonate) films using 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid10.1002/adfm.201200225 ↗
16. Review of the CdCl2 treatment used in CdS/CdTe thin film solar cell development and new evidence towards improved understanding10.3390/coatings4020282 ↗
17. Anion effect on salt-induced conductivity enhancement of poly (3,4-ethylene-dioxythiophene):poly (styrene sulfonate) films10.1016/j.orgel.2010.04.007 ↗
18. Bulk and contact resistance in P3HT:PCBM heterojunction solar cells10.1016/j.solmat.2011.03.046 ↗
19. Effects of thermal treatment and depth profiling analysis of solution processed bulk-heterojunction organic photovoltaic cells10.1016/j.jcis.2014.09.005 ↗
20. Relation of open circuit voltage to charge carrier density in organic bulk heterojunction solar cells10.1063/1.3566979 ↗
21. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
22. Improvement in the photovoltaic efficiency of polymer solar cells by treating the poly(3,4 ethylenedioxythiophene):poly(styrenesulfonate) buffer layer with co-solvents of hydrophilic organic solvents and hydrophobic 1,2-dichlorobenzene10.1016/j.solmat.2011.09.039 ↗
23. Thickness and composition dependence of the glass transition temperature in thin homogeneous polymer blend films10.1021/ma010198n ↗
24. Significant conductivity enhancement of conductive poly(3,4-thylenedioxythiophene): poly(styrenesulfonate) films by adding anionic surfactants into polymer solution10.1021/ma8012459 ↗
25. Highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films using 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid10.1002/adfm.201200225 ↗
26. Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics
27. Comment on “Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics” [Appl. Phys. Lett. 90 (2007) 163511]10.1063/1.2840155 ↗
28. Enhancement of power conversion efficiency of P3HT:PCBM solar cell using solution processed Alq3 film as electron transport layer10.1007/s10854-015-2933-3 ↗