All-inkjet-printed dissolved oxygen sensors on flexible plastic substrates
Source abstract
Abstract
Abstract Inkjet printing is a promising alternative manufacturing method to conventional standard microfabrication techniques for the development of flexible and low-cost devices. Although the use of inkjet printing for the deposition of selected materials for the development of sensor devices has been reported many times in literature, it is still a challenge and a potential route towards commercialization to completely manufacture sensor devices with inkjet technology. In this work is demonstrated the fabrication of a functional low-cost dissolved oxygen (DO) amperometric sensor with feature sizes in the micrometer range using inkjet printing. All the required technological steps for the fabrication of a complete electrochemical three electrodes system are discussed in detail. The working and counter electrodes have been printed using a gold nanoparticle ink, whereas a silver nanoparticle ink was used to print a pseudo-reference electrode. Both inks are commercially available and can be sintered at low temperatures, starting already at 120 °C, which allows the use of plastic substrates. In addition, a printable SU8 ink formulation cured by UV is applied as passivation layer in the sensor device. Finally, as the performance of analytical methods strongly depends on the working electrode material, is demonstrated the electrochemical feasibility of this printed DO sensor, which shows a linear response in the range between 0 and 8 mg L−1 of DO, and affords a detection limit of 0.11 mg L−1, and a sensitivity of 0.03 μA L mg−1. The use of flexible plastic substrates and biocompatible inks, and the rapid prototyping and low-cost of the fabricated sensors, makes that the proposed manufacturing approach opens new opportunities in the field of biological and medical sensor applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Analytical Chemistry and Sensors · Electrochemical Analysis and Applications · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Inkjet printing of nanoporous gold electrode arrays on cellulose membranes for high-sensitive paper-like electrochemical oxygen sensors using ionic liquid electrolytes10.1021/ac3003243 ↗
2. Inkjet-printed gold nanoparticle electrochemical arrays on plastic. Application to immunodetection of a cancer biomarker protein10.1039/c0cp01755h ↗
3. Inkjet printed (bio)chemical sensing devices10.1007/s00216-013-7013-z ↗
4. Screen printed electrochemical platforms for pH sensing10.1039/b9ay00025a ↗
5. Gold-based screen-printed sensor for detection of trace lead10.1016/j.snb.2005.05.028 ↗
6. Technologies for printing sensors and electronics over large flexible substrates: a review10.1109/JSEN.2014.2375203 ↗
7. Ink-jet printing for the fabrication of amperometric glucose biosensors10.1016/0003-2670(92)80002-O ↗
8. Inkjet-printed flexible gold electrode arrays for bioelectronic interfaces
9. Inkjet printed nanohydrogel coated carbon nanotubes electrodes for matrix independent sensing10.1021/ac503748g ↗
10. An impedimetric study of DNA hybridization on paper-supported inkjet-printed gold electrodes10.1088/0957-4484/25/9/094009 ↗
11. A low-cost paper-based inkjet-printed platform for electrochemical analyses10.1016/j.snb.2012.10.113 ↗
12. Inkjet printing of conductive polymer nanowire network on flexible substrates and its application in chemical sensing10.1016/j.mee.2015.04.004 ↗
13. An aqueous ammonia sensor based on an inkjet-printed polyaniline nanoparticle-modified electrode10.1039/b716154a ↗
14. Point of care monitoring of hemodialysis patients with a breath ammonia measurement device based on printed polyaniline nanoparticle sensors10.1021/ac403472d ↗
15. Development of a new generation of ammonia sensors on printed polymeric hotplates10.1021/ac501908c ↗
16. A novel wearable electronic nose for healthcare based on flexible printed chemical sensor array10.3390/s141019700 ↗
17. All ink-jet printed polyfluorene photosensor for high illuminance detection10.1016/j.orgel.2011.01.023 ↗
18. Inkjet printed flexible electrodes for surface electromyography10.1016/j.orgel.2014.12.017 ↗
19. Profiling of oxygen in biofilms using individually addressable disk microelectrodes on a microfabricated needle10.1007/s00604-014-1405-4 ↗
20. Continuous recording of blood oxygen tensions by polarography10.1152/jappl.1953.6.3.189 ↗
21. Up-scaling of the manufacturing of all-inkjet-printed organic thin-film transistors: device performance and manufacturing yield of transistor arrays10.1016/j.orgel.2015.12.018 ↗
22. Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds10.1021/am404581b ↗
23. Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers10.1038/srep08832 ↗
24. Roll-to-roll infrared (IR) drying and sintering of an inkjet-printed silver nanoparticle ink within 1 second10.1039/C5TC02291F ↗
25. Inkjet-printed gold electrodes on paper: characterization and functionalization10.1021/am201609w ↗
26. Investigation of gold nanoparticle inks for low-temperature lead-free packaging technology10.1007/s11664-009-0918-9 ↗
27. Plastic-compatible low resistance printable gold nanoparticle conductors for flexible electronics10.1149/1.1582466 ↗
28. Inkjet printed conductive tracks for printed electronics10.1149/2.0061504jss ↗
29. Metal-based inkjet inks for printed electronics10.2174/1874183501104010019 ↗
30. Silver nanoparticle ink technology: state of the art10.2147/NSA.S68080 ↗
31. The electrochemical formation and reduction of a thick AgCl deposition layer on a silver substrate10.1016/S0022-0728(02)01474-2 ↗
32. Gold cleaning methods for electrochemical detection applications10.1016/j.mee.2008.11.045 ↗
33. Enzymic substrate determination in closed flow-through systems by sample injection and amperometric monitoring of dissolved oxygen levels10.1021/ac50023a026 ↗
34. Patterned surface with controllable wettability for inkjet printing of flexible printed electronics10.1021/am4054546 ↗
35. Determination of heterogeneous electron transfer rate constants at interdigitated nanoband electrodes fabricated by an optical mix-and-match process10.1016/j.snb.2013.12.016 ↗
36. A method of measuring specific resistivity and hall effect of discs of arbitrary shape
37. Inkjet printing of conductive materials: a review10.1108/03056121211280413 ↗
38. Bard · 2001
39. Cyclic voltammetry10.1021/ed060p702 ↗
40. Characterisation of commercially available electrochemical sensing platforms10.1016/j.snb.2009.01.044 ↗
41. Theoretical analysis of polarographic waves. I. Reduction of simple metal ions10.1246/bcsj.28.422 ↗
42. Low-temperature sonoelectrochemical processes: Part 1. Mass transport and cavitation effects of 20 kHz ultrasound in liquid ammonia10.1016/S0022-0728(99)00391-5 ↗